Pneumatic valves - Import export

Probably the most hygienic way of shutting off a flow of media is when the valve does not touch the fluid at all. This is the principle used by this small diameter endless tube valve, in which the fluid is passed through a hose pneumatically compressed or relieved by the valve.

The sliding gate control valve type 8043 in long design with piston actuator and integrated positioner is due to its compact design universally applicable for neutral and aggressive media in the chemical industry, process engineering and plant construction. Due to the direct and backlashfree installation of the positioner on that piston actuator, these valves have no exposed moving parts and are characterized by a high control quality and control dynamics. Digital positioner type 8049 Pneumatic and electropneumatic positioner type 8047 Positioner with integrated process controller type 8049 IPC Positioner type 8047 and type 8049 also in explosionproof version Metal bellows Limit switch Position feedback Pilot valve . . .

The high temperature sliding gate valve type 8023 in reinforced GS3 design with NAMUR interface for universal positioner assembly is suitable for a wide range of process applications up to 530°C. Media such as steam, liquids, gases, etc. can be precisely controlled even in the hightemperature range. Moreover for high speed and cycling applications this valve is a clear choice. Pneumatic Electropneumatic Digital Without positioner for on/off operation Metal bellows Limit switch Position feedback Manual override Pilot valve . . .

Pneumatic control valve with angle seat design. The integrated positioner type 8049 means that a compact design is achieved. All parts that come into contact with the medium are made from stainless steel. Whitworth pipe thread NPT thread Welding ends Triclamp connection Special connections Digital positioner type 8049 Pneumatic and electropneumatic positioner type 8047 Positioner with integrated process controller type 8049 IPC Positioner type 8047 and type 8049 also in explosionproof version Piston actuator of Brass (chrome plated) Stainless steel Polymer Stainless steel diaphragm actuator Low temperature version Pressure balanced version Degreased version, Silicon or PTFEfree version …

Whenever several valves are to be used in a confined space and with minimal piping, a module or strip solution is recommended. In contrast to single piping, the expense for valve piping, fittings, working time, and possible leaks is almost cut in half.

The lateral highpressure valves are valves with two or three connections and two switching positions. The pressure range extends from vacuum up to 500 bar. In this type of construction, the valve drive is not arranged coaxially, but laterally.

Coaxial highpressure valves are valves with two or three connections and two switching positions. The pneumatically operated valves of the VK series in particular have an extraordinarily positive relationship between high pressure range and high flow rate due to their high switching force.

The cartridge valves are available in a nominal width of 10 to 15 mm. Depending on the pressure difference, drives with one, two, or three pistons are required. The tedious dismantling of the entire valve body from the pipeline using a large wrench is no longer necessary; only the three screws have to be loosened. Another advantage is the consistently small valve diameter, even at the highest system pressures. The drives have small diameters and are arranged in tandem, one behind the other. This means that these valves can be installed next to each other to save space, even in extremely confined spaces. A version with a hose seal is available for heavily soiled or sticky media.

The 3/2way externally controlled valves are pneumatically or hydraulically operated valves with three connections and two switching positions. The control is carried out as standard via the attached 5/2way valve or via an existing valve terminal.

The 3/2way externally controlled valves are pneumatically or hydraulically operated valves with three connections and two switching positions. The control is carried out as standard via the attached 5/2way valve or via an existing valve terminal.

The 2/2way externally controlled valves are pneumatically or hydraulically operated valves with two connections and two switching positions. The control is carried out as standard via the attached 5/2way valve or via an existing valve terminal.

The 2/2way externally controlled valves are pneumatically or hydraulically operated valves with two connections and two switching positions. The control is carried out as standard via the attached 5/2way valve or via an existing valve terminal.

The 2/2way externally controlled valves are pneumatically or hydraulically operated valves with two connections and two switching positions. The control is carried out as standard via the attached 5/2way valve or via an existing valve terminal.

The 2/2way externally controlled valves are pneumatically or hydraulically operated valves with two connections and two switching positions. The control is carried out as standard via the attached 5/2way valve or via an existing valve terminal.

The technology in the FMX series stands for higher flow rates compared to other valves. Or are you looking for compactness? Our FMX valves occupy just a small installation space, while offering the same speed and quality.

Rotex offers a broad range of pneumatic solenoid valves (commonly known as Air solenoid valves) that includes Electric air solenoid valve, high-pressure pneumatic solenoid valves, and compressed air solenoid valves. Depending on the port, Pneumatic solenoid valve is available as 2 way pneumatic solenoid valve, 3 way pneumatic solenoid valve. Rotex also offers gas solenoid valves in various voltage ranges like 12v, 24v, 220v etc. Why should you choose Rotex for Pneumatic Solenoid Valve( Air Solenoid Valve)? Quick Delivery 1-2 weeks for Catalogue solenoid valve 1-2 months for customizing the solenoid valve Interchangeable coils Reduce inventory for OEM easy to manage spares for end-users International approved Global approvals from ADNOC, ENOC, Petrobras, Petronas, KNPC, Edison, ENI S.P.A , Sonatrach, Qatar Petroleum, PTT, Saline water conversion corporation Lukoil Gazprom etc. 11+ International Product Certification Certified by SIL3, Atex, UL, Inmetro, IECEX, KOSHA etc.

Hydraulically or Pneumatic operated. TYPICAL APPLICATIONS Irrigation, water treatment, animal feeding plants.

Pneumatically operated angle seat valve is the extremely reliable allrounder in valve technology and is predestined for very high switching capacities. In stainless steel design for neutral and aggressive media but also for a wide range of temperature applications suitable. The angled seat design offers a high flow rate. Whitworth pipe thread NPT thread Welding ends Triclamp connection Special connections Limit switch Pilot valve Manual override . . . Stainless steel Bronze Brass Piston actuator of Brass (chrome plated) Stainless steel Polymer Stainless steel diaphragm actuator Low temperature version Pressure balanced version Version with approval according to DIN 161 Degreased version, Silicon or PTFEfree version …

The GEMÜ 651 2/2-way diaphragm valve has a stainless steel piston actuator and is pneumatically operated. The valve is designed for use in a sterile environment. The valve has a fully integrated automation module and an internal air supply. Normally closed (NC) and Normally open (NO) control functions are available. The automation module is available in two versions. —Reduced planning and cabling time —Integrated air ports —Speed-AP function for fast mounting and initialisation —Optional flow direction and installation position

The GEMÜ 530 2/2-way globe valve has a rugged low maintenance stainless steel piston actuator and is pneumatically operated. The valve spindle is sealed by a self-adjusting gland packing providing low maintenance and reliable valve spindle sealing even after a long service life. A wiper ring fitted in front of the gland packing protects the seal against contamination and damage. — Suitable for inert, corrosive, liquid and gaseous media — Easily cleanable — Actuator and valve body are free from non-ferrous metals — High flow rates and compact design — ATEX version available as an option

The GEMÜ 620 2/2-way diaphragm valve has a low maintenance metal membrane actuator and is pneumatically operated. The valve is also suitable for high media temperatures up to 150 °C. —Insensitive to particulate media —High flow rates —Optional flow direction —Suitable for inert and corrosive liquid and gaseous media —PFA, PP or hard rubber lined (optional)

The GEMÜ Q40 2/2-way pinch valve has a stainless steel piston actuator and is pneumatically operated. The valve guides a tube which is compressed from above by a compressor to control and regulate media. The compressor's specially developed contour and the inserts' contour minimise the strain on the tube and thus increase the tubes' service life. Tubes can be safely inserted and removed in simple steps and without tools. The available control functions are "normally closed (NC)" and "normally open (NO)". An integral optical position indicator is standard

The GEMÜ 650 2/2-way diaphragm valve has a stainless steel piston actuator and is pneumatically operated. The valve is designed for use in a sterile environment. All metallic actuator components are made of stainless steel. The compression springs of diaphragm sizes 80 and 100 are made of epoxy coated spring steel. Normally closed (NC), Normally open (NO) and Double acting (DA) control functions are available. An integral optical position indicator is standard. —Hermetic separation between medium and operator —Suitable for inert and corrosive liquid and gaseous media —CIP/SIP cleaning and sterilising capabilities —Autoclave capability —Optional flow direction and installation position

The GEMÜ 550 2/2-way angle seat globe valve has a low maintenance stainless steel piston actuator and is pneumatically operated. The valve spindle is sealed by a self-adjusting gland packing providing low maintenance and reliable valve spindle sealing even after a long service life. A wiper ring fitted in front of the gland packing protects the seal against contamination and damage. —Suitable for inert and corrosive liquid and gaseous media —All medium wetted parts can be selected to suit relevant applications —Suitable for high media temperature —Stainless steel actuator easily cleanable

The GEMÜ 554 2/2-way angle seat globe valve has a plastic piston actuator and is pneumatically operated. The valve spindle is sealed by a self-adjusting gland packing or a compact seal cartridge, dependent on the size and version. A wiper ring or the wiper contour of the seal cartridge additionally protects the valve spindle against contamination and damage. This provides low maintenance and reliable spindle sealing even after a long service life. —Simple and fast commissioning —Good flow capability and compact design —Valve and positioner are optimally adapted to each other. (For positioner details please refer to the relevant data sheets) —Optionally suitable for contact with food according to Regulation (EC) No. 1935/2004 (K-No. 1935) —Standard gland packing suitable for vacuum up to 20 mbar (abs.)

Our modern turning machines with CNC controls of company “Mazak” can work details from all types of steels, crude iron and non-ferrous metals. The maximum diameter of working detail is 380 mm, at maximum length 1000 mm. The machines are equipped with devices for the filing of rods. Our products are intended for the automotive industry, machine building industry, construction and other industries. The main details which we produce are: Different types of nozzles for hydraulics and Pneumatics Parts of antivibration elements Turning details about safety pneumatic valves Details for machine building industry Axles and shafts, bushings Bearing units for agricultural machinery

Valves and shut-off devices are components for blocking and control of liquids or gases. The range of products includes 2-way ball valves, 3-way ball valves, hydraulic ball valves, angle seat valves, butterfly valves as well as solenoid valves, pressure switches, blocking valves, needle valves and gate valves. Coaxial valves and check valves also belong in the assortments as well as dirt strainers, safety valves and pressure limiting valves.

Control valves and directional valves clear, block or change the flow direction of the medium used. They control the direction of the volume flow, i.e. the exit direction of a cylinder, and through start-stop commands the travel distance of the stroke. Our product range includes manual, pneumatic and electro-pneumatic actuated valves in 3/2-, 5/2- and 5/3-directional design. Directional valves acc. to NAMUR, supply units, base plates, logistics modules and two-handed safety control valves add to the assortment.

Control valves and directional valves clear, block or change the flow direction of the medium used. They control the direction of the volume flow, i.e. the exit direction of a cylinder, and through start-stop commands the travel distance of the stroke. Our product range includes manual, pneumatic and electro-pneumatic actuated valves in 3/2-, 5/2- and 5/3-directional design. Directional valves acc. to NAMUR, supply units, base plates, logistics modules and two-handed safety control valves add to the assortment.