Screwdrivers - Import export

Error-proofing (PokaYoke) torque screwdriver with limit switch output to eliminate missed tightening Ideal for assembly processes with torque monitoring. After reaching the set torque, the limit switch transmits a trigger signal. This can be picked up by means of a PLC, for example. At the same time, the slip clutch is activated, making over-torque impossible. Series RTDLS are adjustable models. Along the micrometer scale, the desired torque can be easily and quickly adjusted. A locking mechanism prevents unintentional torque adjustment during use. Series RNTDLS are fixed models without scale and are particularly suitable for repetitive tightening operations at the same torque. An additional auxiliary tool (sold separately) is available for each of the 500 cNm models for easier power transmission. For counting tightening operations, the LS screwdriver can be connected to an optional 'CNA-4mk3', for example.

When the set torque is reached, the rotary slip clutch is activated. At the same time, a signal that it has been fully tightened is transmitted by radio. The LED "feedback" system lights up in the handle blue for OK, red for NG. An R-CM receiver (successor to the R-FH256) can recognise the IDs of up to four torque tools. However, simultaneous transmissions are not supported. By using it, a "Poka Yoke" error prevention system can be easily implemented. Using the optional SB-FH2 setting box and setting software, communication settings for R-CM can be easily executed (wireless). The R-CM receiver can control the number of tightening operations of a torque spanner or torque screwdriver. The RTDFH / RNTDFH wireless screwdrivers comply with the telecommunication standards in Japan, the USA, Malaysia, Thailand, Taiwan, Mexico, Vietnam, China, the EU, South Korea, Russia and India (information status June 2021).

Tohnichi's AMRD series torque screwdriver provides same features as series RTD, except designed for tightening small screws. Thereby this model is ideal for assembly of watches, precision electronic equipment, computer, etc. Via micrometer scale torque can easily and quickly be adjusted. Index finger holding feature allows the operator to tighten with precise movements. Upon reaching the set torque, it clicks to signal tightening is complete. Integrated rotary clutch mechanism reliably prevents over-torque. Key Features: - Accuracy and calibration compliant to ISO 6789 type II class D - Micrometer adjustable - Clockwise direction - Click signal - Rotary clutch - Calibration certificate (ISO/JIS) incl. Options: - Counterclockwise tightening model available on request. - Optionally available in metric (gf·cm) or in english units (lbf·in, ozf·in).

Dial Indicating Torque Screwdriver with mNm scale Tohnichi's MTD series torque screwdriver is suitable for inspection and tightening of very small screws, e.g. small torque motor shafts or the like. Torsion bar mechanism makes accurate measurement possible. With bi-directional scale plate, it can be used for both retightening and loosening torque testing methods. Memory pointer captures peak torque. Applicable for international use including the EU region. Compliant with calibration procedures of ISO 6789 Type I Class D. Key Features: - Bi-directional scale - Peak torque indication via Memory Pointer - Accuracy and calibration compliant to ISO 6789 type I class D - Bit insert #2 Tohnichi Shipping List: - Screwdriver MTD - Calibration Certificate (ISO/JIS) - Operating Manual - Special Bits Cross #0, Slotted 0.15x1, 0.2x1.5, 0.3x2 Options: - Alternatively with english units (ozf·in) available. Metric scale (gf·cm) on request.

Dial Indicating Torque Screwdriver Tohnichi's FTD-S series torque screwdriver is ideal for inspecting tightened screws. With bi-directional scale plate, it can be used for both retightening and loosening torque testing methods. Memory pointer captures peak torque. Model FTD8N-S and FTD16N-S comes with auxiliary tightening tool ("T-Grip") as standard accessory. Applicable for international use including the EU region. Compliant with calibration procedures of ISO 6789 Type I Class D. Key Features: - Bi-directional scale - Peak Torque indication via Memory Pointer - Coloured dial plate - Accuracy and calibration compliant to ISO 6789 type I class D - Tool insert 1/4 inch Shipping List: - Screwdriver FTD-S - Traceable Calibration Certificate (ISO/JIS) - Operating Manual Options: - Models with metric scale (gf·m, kgf·m) on request. Related Products Insert Bits with 1/4“ hex drive acc. DIN 3126 E6.3

Torque Screwdriver with reversible digital display Tohnichi's digital screwdriver STC2-G is ideal for controlled screw tightening or inspections. Manual screw tightening always represents a risk because fasteners are often overloaded and a fracture hazard. This risk is minimized by the torque screwdriver with LED indicator ring and reversible display. The STC2-G is powered by a Li-Ion battery pack that allows a continuous use of up to 30 hours. Available measuring units are cN·m, kgf·cm, Lbf·in, and ozf·in. Up to 1000 readings can be stored in the internal memory. The display of STC2 -G can be reversed, whereby the reading from the respective viewing angle is greatly facilitated. This increases the reliability of results and ease of use. Key Features Accuracy ± 1% Track or Peak mode in both directions 3-colour LED indicator ring shows torque status Memory for up to 1000 readings USB interface for data export 1/4“ hex insert for bits and adaptors acc. to DIN 3126 E6.3

Colour Code Shrink Sleeves Using several PM screwdrivers preset to different torque values? Color coding sleeves keep your preset torque wrenches identified. Use a different color for each torque, and tell the operator which to use for what application. How simple! Color coding is a fast and effective means of identifying the correct tool for a specific use. These shrink sleeves are suitable for use on the shaft on SR preset torque screwdrivers, and come in five colors.

Preset Torque Screwdriver Sturtevant Richmont PM-Series Preset Torque Screwdrivers are ideal for any application where 1. high repeatability for low torque is needed, 2. excellent durability and versatility is needed. These needs are common in high-precision assembly operations and for maintenance tool kits for electronic and electro-mechanical products. The operator cannot overtorque. A clutch releases automatically when desired torque has been achieved. The anti-backlash design enhances the repeatability. PM torque screwdrivers are incredibly durable. Many owners experience a service life of 15+ years. Key Features: - Bi-directional accuracy of ± 6% i.v. (20-100% of capacity) - Meets or exceeds ASME B107.300-2010 & EN ISO 6789 - Anti-backlash design - Short dwell designed to prevent repetitive motion injuries - 1/4 hex drive (C 6.3) Can be ordered preset from factory with certificate of calibration from SR's ISO/IEC 17025 Accredited Calibration Laboratory.

Micrometer Adjustable, Reliable, Complete - Perfect for the Field! Our kits both have the CAL 36/4 Micrometer Adjustable Torque Screwdriver at their heart, assuring efficient and reliable repair and maintenance operations! Features an Benefits Each includes a CAL 36/4 Micrometer Adjustable Torque Screwdriver. A free NIST-traceable tabulated Certification is included from SR's ISO/IEC 17025 Accredited Calibration Laboratory! Each includes a custom blow-molded plastic case for convenient organization and safe storage and transport. Each includes slotted bits, Phillips bits, and an adapter to permit use with sockets.

Micrometer Adjustable Torque Screwdriver with Dual Scale Sturtevant Richmont's CAL 36/4, with its' dual English/Metric scale, amazing durability, and ease of use has been an industry leader for decades – for good reasons! The CAL line of torque screwdrivers is first choice for many electronic and small-component manufacturers. The SR CAL-Series Adjustable Torque Screwdrivers are ideal for any application where: High repeatability for low torque is needed, Excellent durability and versatility are needed. These needs are common in high-precision operations such as electronics and electro-mechanical repair. To operate, simply dial torque setting and insert bit. The Micrometer scale on the shaft is marked in dual incrementation (lbf·in and N·m on CAL 36/4, kgf·cm on CAL 40). The operator cannot overtorque. A clutch releases automatically when desired torque has been achieved. The anti-backlash design enhances the repeatability. CAL torque screwdrivers are incredibly durable. Many...

Adjustable Torque Screwdriver for Small Screws (M1-M2) Tohnichi's BMRD series torque screwdriver provides same features as series RTD, except designed for tightening small screws. Thereby this model is ideal for assembly of watches, precision electronic equipment, computer, etc. Via micrometer scale torque can easily and quickly be adjusted. Index finger holding feature allows the operator to tighten with precise movements. Upon reaching the set torque, it clicks to signal tightening is complete. Integrated rotary clutch mechanism reliably prevents over-torque. Key Features: - Accuracy and calibration compliant to ISO 6789 type II class D - Micrometer adjustable - Clockwise direction - Click signal - Rotary clutch - Calibration certificate (ISO/JIS) incl. Options: - Counterclockwise tightening model available on request. - Optionally available in metric (gf·cm) or in english units (lbf·in bzw. ozf·in).

Micrometer Adjustable Torque Screwdriver The ExacTorq® torque screwdriver permits single-digit adjustment. Gone are the days of estimating torque. A simple twist of the end-mounted DigiLock mechanism sets your torque levels in exact, single digit increments. The positive locking detent secures your selection. Its‘ unique tri-lobular grip design for enhanced comfort and handling translates into improved operator technique and lower risk of repetitive motion injury. Enhanced comfort translates into enhanced accuracy. The operator cannot overtorque. A clutch releases automatically when desired torque has been achieved. The anti-backlash design enhances the repeatability. Additionally, the ExacTorq® is comfortable in even the smallest of hands, performing flawlessly when used by women and men on the assembly line. To operate, simply dial torque setting and insert bit.

• For allen keys • The ergonomic multi-component punch handle with rotating cap and soft fine precision zone makes it possible to transfer the smallest torques • Blades hardened and chrome-plated with black tip • Blades made of chrome vanadium steel

Set of 6 screwdrivers Ergonomic handle in non-slip rubber Measurements: - 4x100 5x125 6x150 | + 1x75 2x100 3x150 Packed in a display box

For controlled screwing at a specified torque With scale for the correct torque

Current Controlled Torque System suitable for screw fastening work Easy fastening setting by controller Lowvoltage brushless motor ESD (electrostatic discharge) protection structure For both handheld / automatic machines Nine speed settings available Automatic three step speed control function Two types of measuring methods (Time/Motor rotation signal) Seven color indication LED (At the tip of the screwdriver) Two external I/O signal connection ports (NPN PNP switchable, RS232C) Controller has built in counting function Preventing human errors Various settings can be configured via a PC (Pree setting software available on NITTO KOHKi website here) More infomation available on NITTO KOHKI website here)

Adjustment kit hf 10 plastic adjustment screwdriver Characteristics set of 10 plastic adjustment screwdrivers Specifications

With the new intelligent OnRobot screwdriver for light industrial, cooperation and assembly robot you can easily automate processes. Intelligent error detection and handling of multiple screw sizes ensures consistent results and drastically reduces your cycle time. Seamless integration with the robot of your choice. For example Universal Robots, Nachi, Doosan, Yaskawa, TM Robot, Kawasaki, ABB, Kuka, Hanwha, Fanuc. Functionality Due to the simple connection of the screwdriver and the operation and programming via the own URCap (only applies to Universal Robots) the grippers are ready for use in the shortest time. In addition, the connection time is reduced by the OnRobot quick-change system Quick Changer and Dual Quick Changer.

• Containing quality tools • The ergonomic multi-component design with integrated soft zone and pronounced quick driving area makes it possible to work quickly without getting tired thanks to the optimum and hand-friendly power transmission • Insulation according to DIN EN/IEC 60900 • In practical sales packaging • Blades hardened and black with injected insulation • Blades made of molybdenum vanadium steel / chrome vanadium steel

• Containing quality tools • The ergonomic multi-component design with integrated soft zone and pronounced quick driving area makes it possible to work quickly without getting tired thanks to the optimum and hand-friendly power transmission • Insulation according to DIN EN/IEC 60900 • In practical sales packaging • Blades hardened and black with injected insulation • Blades made of molybdenum vanadium steel / chrome vanadium steel

• Containing quality tools • The ergonomic multi-component design with integrated soft zones and pronounced quick driving area makes it possible to work quickly without getting tired thanks to the optimum and hand-friendly power transmission • In practical sales packaging • Blades hardened and chrome-plated with black tip • Blades made of chrome vanadium steel

• For Pozidriv cross-head screws • The ergonomic multi-component design with integrated soft zones and pronounced quick driving area makes it possible to work quickly without getting tired thanks to the optimum and hand-friendly power transmission • The handle core made of impact-resistant hard plastic is sheathed with various soft components and embedded highly flexible cushions which optimally adapt to the hand and ensure maximum force transmission • The flexibility of the material and the pleasant feeling of the high-speed turning zone additionally increases the sensitivity and supports the precise application of force • The oval shape and the roll protection on both sides prevent annoying rolling away at the workplace • Practical hole booklet for hanging up the tools or for inserting a lever • Bit holder for the drive by, e.g. a ratchet or a cordless screwdriver • Blades hardened and chrome-plated with black tip • Blades made of chrome vanadium steel

Tamper Resistant, Dimensions TR15x60mm, Total length 160mm, Blade-¯ 3.5mm. ESD

1.200 U/min, mechanical torque adjustment 0,4- 3Nm, Push start, for 1/4″ Hex bits

Tamper Resistant, Dimensions TR15x60mm, Total length 160mm, Blade-¯ 3.5mm. ESD

Dimensions PZ-0 3.0x60mm, Total length 160mm, Blade-¯ 3mm. ESD

Dimensions PH-0 3.0x60mm, Total length 160mm, Blade-¯ 3.0mm. ESD

Dimensions 3.0x150mm, Total length 250mm, Blade-¯ 3.0mm, ESD

Space for labeling, total length: 5.50cm