Measuring devices - Import export

Measurement and control technology from Heidenhain Regardless of whether you require measurement devices for your machine tools or length measurement systems – Heidenhain is your best option for challenging positioning tasks. With over 40 years of experience with measurement and control technology from Heidenhain, we can offer you a broad range of products to meet a variety of requirements in your plant. The encoders are available for various ranges with and without integral bearings and we also supply sliders and sensing heads for length measurement systems. A lot of our products also include comprehensive technical information documents, such as operating instructions and product information. We can supply general reconditioned repairs as well as new, replacement and exchange parts for current and discontinued modules and always at fixed prices.

The line laser is a measuring device for aligning drive pulleys laterally, horizontally and vertically using a laser beam, preventing heavy wear to the edges of the belt. Laser beam range approx. 5 to 10 m Laser class 2 (EN 6082511997) Wavelength 630–680 mm Power < 1 mW Power supply 2 x 1.5 V (LR44) Note Never look directly into the laser beam and do not point it at other people, animals or strongly reflective surfaces. The device and the target points contain highpowered magnets. Individuals with pacemakers should not use the device due to safety reasons. Keep a safe distance away from electronic devices and wristwatches in order to prevent interference. The device must not be used in potentially explosive areas.

power consumption electricity costs CO2 emissions operating time on a large LCD display and easy-to-use buttons.

DryLin® measuring system With display with clamp Fix rail or carriage Guide: DryLin® W DryLin® W - Digital measuring system DryLin® measuring system Ready-to-fit measuring device for external signal output Resolution 0,1 mm Accuracy +/- 0,025 Small sensor with integrated unit drylin® WKMEX measuring system with external output DryLin® measuring system With display with clamp Fix rail or carriage Guide: DryLin® W DryLin® W - Digital measuring system DryLin® measuring system Ready-to-fit measuring device for external signal output Resolution 0,1 mm Accuracy +/- 0,025 Small sensor with integrated unit drylin® WKMEX measuring system with external output

Do you own a measuring device from HGL Dynamics and want to use it to obtain reliable measured values in the future? In this case, calibration is essential. We will advise you on the selection of the right calibration method for your amplifier. In addition, we also offer a factory calibration of your HGL measuring devices according to your specifications. All calibration references we use are traceable to national and international standards. We will be happy to prepare a suitable offer for this.

The Hawk user interface gives you full control over your measurement. The interface of the Hawk GUI offers the possibility of a simple and clear configuration of all measurement channels, as well as the control of data acquisition during the actual measurement. It also provides an overview of the organization of all measurement PCs and amplifiers in the network. •,Interface for configuring all connected measuring devices. •,Configuration of various limit values to monitor the measurement. •,Seamless recording of your measurement •,Define individual time ranges (manoeuvres) to make them easier to identify in the downstream analysis. •,Configuration of additional, external amplifier hardware can be integrated. •,No license fees for using the software. •,MS Windows compatible

Designed specifically for servicemen of telecommunications companies. The product consists of four compartments: In the first large compartment there are compartments in which the following items can be placed: laptop, charger, folder, with documents, cables. In the second middle compartment there is a pouch with tools. In the pouch, you can place: connector crimping tool, flat, cross-head screwdrivers, stationery knife, wire cutters, a hammer, pliers, electrical tape/zip ties, RG45 connectors, Scotchloks. In the third middle compartment there is a pouch with compartments for items: measuring device, organizer with consumables, test tube, Tone Generator, Multimeter. The fourth small compartment can include: splitters, RJ45/RJ11 sockets, stock of Scotchlocks, stock of clamps, The backpack is designed specifically for servicemen of telecommunications companies.

Scott Protégé ZM is maintenance-free, user-friendly and a reliable gas measurement device. Once the Protégé is activated neither further charging nor calibration is necessary! During the run time of 2 years the device measures oxygen, carbon monoxide or hydrogen sulphide. Maintenance-free Oxygen, carbon monoxide, or hydrogen sulphide In order to extend battery operation time, after measurements power save modus turns on Triple- warning device with optical, acoustic and vibration alarm signals LC-display can be customized and it indicates remaining device runtime, gas measured values in real-time or both Alarm thresholds as well as deadlines for inspection and calibration are configured by the user itself Function for data recording Complies with protection class IP66/67 (certified by an independent institute) Optional expandable by testing facility with 4 equipment pockets and programming device for IR- interface Data sheet

The RH1 air thermo- hygrometer is an easy-to-use device for the rapid determination of the relative and absolute air humidity as the dew point temperature of the surrounding air. In addition, by storing the device at wood or paper, the equilibrium moisture content (EMC) and the water content in the material can be determined. At the same time the current temperature - optionally in °C or °F - is displayed by each measurement. The measuring range of the RH1 thermo- hygrometer is between 0 and 100% relative humidity at a resolution of 0.1%. The calibrated measurement range, in which the measurement is within the defined tolerance limits, ranges from 10% to 90% of the relative humidity, where the accuracy of ±1.5% of relative humidity (at 25 ° C) is reached. The temperature measurement range is from -10 to +60 ° C or 14 to 140 ° F, at a resolution of 0.1 ° C. The accuracy is ± 0.4 ° C.

The humimeter BM2 biomass moisture meter measures the water content of various kinds of biomass and is ideal for operators of biomass heating plants. The bulk density compensation ensures accurate and reliable results. The BM2 biomass moisture meter can be used for the determination of water content of wood chips, bark, wood pellets, elephant grass, wood shavings, sawdust and maize cobs. Handling / Measuring procedure Place the empty measuring device on the scale and fill the supplied 13 liter bucket with the material to measure. Constantly fill the material into the measuring chamber and select the right calibration curve. The humimeter BM2 biomass moisture meter instantly displays the water content. If required the measuring value can be saved on the device or sent to your PC via supplied USB cable. + high accuracy due to high sample volume of 13 liters + bulk density compensated + quick measuring results + wide range of calibration curves + customer calibration function

Static Electricity is a major problem that has seriois impact on product quality, throughput and worker safety in many industries. In electronics and media, ESD Electrostatic Discharge affects semiconductor manufacturing, electronics assembly, flat panel display & hard disk drive production, and film processing. In industrial, food, telecom, textile, packaging, chemical, medical and pharmaceutical manufacturing, static electricity creates problems with cling and particulates such as in the processing of paper, fabrics, plastics, powders and other materials.

Flow/ pressure/ level/ temperature/ ... transmitters, Gauges, PLC/ FCS/DCS/... control systems and all related equipment and accessories

- Measuring average volumetric flow rate in flow directions - Totalizing volume of flows independently or calculating their algebraic sum with regard to flow direction - Determining the current value of flow velocity and flow direction - Outputting measurement results to the frequency/pulse or logical output - Logging of measurement data and configuration settings in the internal nonvolatile memory - Displaying measurement, configuration and history (logged) data on the built-in indicator (LCD) and outputting the data to the external devices via M-BUS interface or RS-485 interface - Configuring the flow meter according to on-site and process requirements - Monitoring and indicating alarm conditions (ER, error situations) and faults; recording error and fault types and intervals into the corresponding logs - Protecting logged data and configuration settings from unauthorized access, -R400 -MAP16 -EN ISO 4064, -OIML 49, -RO-2275-15356 (TYPE APPROVAL)

ULTRASONIC WATER METER DN 15 to DN 40 MID CERTIFIED EN 14154 OIML R49 RO-2275-15356 TYPE APPROVAL READING OPTIONS; -PREPAYMENT -MBUS -PULSE OUTPUT -RF