Plating - Import export

Dimensions Thickness: 5 mm up to 150 mm Width: 1000 mm up to 3050 mm Tolerances: EN10029, ASTM A6, ASTM A20, ASME SA6, ASME SA20, DIN 1543, JUS. C. B4. 110 UT Tests: EN 10160:1999 Z quality requirements: EN 10164:1993 Weight and terms of supply: Maximum plate weight is 8 tons 9,5 tons can be produced upon request Flame cutting between 40 to 150 mm thickness Surface conditions: rolled, sandblasted and primer coated High tensile strength plates according to DIN standards can be produced with hardness at - 50 degrees and yield strength at high temperatures, whichever is preferred in other standards.

Crane Plates with carry Loop All dimensions possible.

Round baseplates with T-slots are used for constructing modular fixtures. These baseplates are positioned and mounted directly on machine tables. The precise longitudinal and transverse slot spacing ensures very high repeat clamping accuracy. The aligning holes are used to align the baseplate on the machine table. Please order locating pins to locate the baseplates separately. Ring bolts with T-nuts for hoisting are supplied. Other dimensions available on request. On request: other dimensions. Drawing reference: 1) hole for DIN 912 cap screw (D4)

Temperation of fluids Pillow plates are used everywhere where liquids must be temperated. In dependence of application the liquids can be cooled or heated. Cause of this wide range of applications pillow plates are used in the process industry, in the cooling industry and in a lot of other industries. Pillow plates are also know as heat exchanger plates, evaporator plates, cooling plates /sheets and thermo plates / sheets. Pillow plates as air-/water-heat exchanger Additionally to the temperation of liquids pillow plates are also used as air-/liquid heat exchangers. In case of polluted or wasted air and if there are high demands for cleaning, more and more pillow plates are used as air-/water-heat exchanger. The large exchange surface and the good possibilities for cleaning are important features for this type of heat exchanger.

Frame polyamide PA66 GF25 V-0. Elastomer plate EPDM, ozone resistant acc. to DIN 53509, Stage 0 (best stage). Seal TPE TPV. Version: Black. Note: The cable gland plates are suitable for leading through cables without plugs (non-assembled lines). Cables, wires, hoses, pneumatic and hydraulic lines can be routed through. The lines can be inserted without piercing. The elastomer plate adapts to the cables and provides optimum sealing and strain relief. Unused ducts remain securely closed and sealed. Available with different glands or as a blind plate. Rating IP66. Certificates / standards met: UL 514B UL / CSA-File E140310

Made of nickel-plated brass with union nut

Made of nickel-plated brass and plastic

Cable and housing PUR Contacts gold-plated bronze. Version: Bush (female) Voltage: U max. 60 V Current: I max. 4 A Terminals: 3-pin Security type: IP 67 Note: Plug connector with screw fitting. Plug encapsulated to cable.

Mounting plate steel/plastic. Monitor bracket aluminium. Bearing washers and sleeves plastic. Mounting flange aluminium. Mounting adapter aluminium. Screws steel. Version: Mounting plate painted. Monitor bracket painted. Mounting flange painted. Mounting adapter painted. Screws electro zinc-plated

Plating Nr. 20

Steel 1.0718 or stainless steel 1.4305. Version: Electro zinc-plated steel. Bright stainless steel. Note: Pin with groove, suitable for DIN 71752 clevis. Secured with a DIN 6799 E-type circlip (alternatively a KL or SL clip). When combined with a suitable clevis and tang, forms a fully functional clevis joint.

Housing aluminium. Precision tube nickel plated steel. Trapezoidal thread spindle steel. Note The doubletube linear actuator can be operated manually or electrically. Due to the short duty cycle, the units can be adjusted several times a day at low speed and with high stability. Width, length and height adjustment possible.

Latches with draw bail for securing and locking hatches, container lids, machine cladding etc. By exceeding the dead centre they resist vibration. The locking force is applied by drawing on the bail. The latches can be screwed down or riveted. We recommend using countersunk screws for fastening the components. Order catch plates separately.

On request: Other slot widths. Drawing reference: machined faces: +0.2 mm/ +0.5 mm unmachined faces: ±2 mm

The easy operability and rapid adjustment using a scale means that the clamping jaws can be quickly and surely adapted to new workpieces The workpiece is always centred through the systematic construction of the 5-axis compact clamping system. The optimal accessibility to the workpiece allows short, standard tooling to be used. Tooling costs are significantly reduced. Positive down force by a clamping depth of >5 mm. Clamping widths of 20 mm to 320 mm are possible. Assembly: The 5-axis clamping system compact can be mounted on T-slot tables, grid systems or, using an adapter flange on conventional zero-point clamping systems. Accessory: Seating ledge 41345 Jaw plates 41320 Pendulum jaws 41325 Centre jaws 41335 Coupling for cross-clamping 41365 Order the seating ledges and jaw plates with pins separately.

High pressure force thanks to the large contact surface and good power transmission thanks to the Torx mount. Fast assembly without pre-drilling.

The Alumero cross connector can be quickly positioned and fastened in the base rail. The second rail layer is also quickly and securely connected with the quick attachment

EBINGER has a big stock of used honeycombs and plate-type catalysts from various manufacturers at its disposal. It is very intact material which can be adapted to the technical requirements of the customer’s catalyst after our careful ultrasonic regeneration. This adaptation takes place during the regeneration process in our plant, both with respect to the requested activity and conversion rate as well as with regard to the design-related properties of the respective customer’s DeNOx plant. According to the experience gained from ultrasonic regeneration and the reuse of tens of thousands of cubic meters of DeNOx catalyst material, the inactivation behavior of ultrasound-regenerated used catalysts corresponds exactly to that of new catalysts. The savings made by working with used catalysts compared to buying new material is between 35 to 50%. You can immediately find out by telephone whether we have material which is suitable for you in stock or whether we can procure it for you.

At given need our experts can invoke extensive subcontracting.

7 Oz Vending Cardboard Cup Product Features - 7 Oz hot beverage paper cups with a volume of 180 ml / 7 Oz can be used safely for serving all types of tea and coffee and other hot beverages. - 7 Oz cold drink paper cups can be used for all kinds of cold drinks from fruit juices to cold soft drinks and cold coffee varieties. - Disposable hot and cold drink cups are approved and safe for food contact. - Water-based paint is used for hot and cold beverage printed cardboard cups and is healthy. It is produced from certified and reliable paper. - 7 Oz paper vending cups have a paper weight ranging from 160 GSM to 230 GSM and a product weight between 3.5 gr and 5.2 gr. It can carry approximately 180 ml volume of liquid as full. - 7 Oz paper vending cups are first class food grade cups. It can be used effortlessly in all conditions. Compatible for all vending machines. - If you request printed paper cups, we print them using water-based paint.

Paddle, 2-parts, machined, 140 mm wide, Paddel, material: heat resistant steel casting 1.4848 / GX40CrNiSi25-20 or 2.4879 / G-NiCr28W

Pusher plate, as cast, 300 mm wide, without air outlet slots, material: material: heat resistant steel casting 1.4823 GX40CrNiSi27-4

Pusher plate, as cast, 120 mm wide, without air outlet slots, material: material: heat resistant steel casting 1.4823 GX40CrNiSi27-4

To ensure that no problems arise during the import, it is important that the car has the correct registration certificate. Applying for a Dutch registration certificate takes about 5 days. As soon as this is received, a final license plate can be requested. We can understand that this can be a difficult process and that there are things that are easily overlooked. That is why we help and support you in every step of the import process.

Glass vases with mirror silvering made internally. Vases, centerpieces, chargers, and more.

Sandblasting the glass to reduce its transparency or to embellish it with shapes/designs/symbols. Can be combined with other processes such as silvering and decoration.

Trays and placemats made by combining silver plating, sandblasting, decoration and antiquing processes.