Solvent free - Import export

TETRASOL is an aqueous solution of purified potassium salts of tetrahydroiso-humulone produced from the alpha-acid fraction of a hop liquid CO2 concentrate extract in an all aqueous process. The product is free of any solvent residues. The benefits of the use of TETRASOL in comparison with traditional hopping are high flexibility in beer bitterness adjusting, improved foam, enhanced cling and light-stability. AVAILABILITY TETRASOL is available in 10% (+/- 0.5%) tetrahydroiso-humulones in aqueous solution ready for direct addition to beer without pre-warming nor dilution. DILUTION If dilution is desired for metering pump requisites for example TETRASOL chould be diluted 10 times. Soft or deionized water equal to nine times the weight of TETRASOL 10 is needed. (Hard water may cause cloudiness). The pH of the soft water is adjusted to 10 to 11 using potassium hydroxide. The 1:9 dilution is prepared by slowly adding the weighed amount of TETRASOL to the stirred soft pH10-11 water (T...

ISOHUMULEX is an aqueous solution of purified potassium salts of isohumulones produced from a liquid CO2 concentrate extract of hops in an all aqueous process. The product is free of any solvent residues. The benefits of the use of ISOHUMULEX in comparison with traditional hopping are high flexibility in beer bitterness adjusting, improved foam and enhanced cling. AVAILABILITY ISOHUMULEX is available in 10% and 20% (+/- 0.5%) isohumulones-UV in aqueous solution. DILUTION ISOHUMULEX can be used directly or can be diluted (for example 10 times). Soft or deionized water is needed. (Hard water may cause cloudiness). The pH of the soft water is adjusted to 10 to 11 using potassium hydroxide. The 1:9 dilution is prepared by slowly adding the weighed amount of ISOHUMULEX to the stirred soft pH10-11 water (T = 50°C). ADDITION The recommended addition point is at any point between the end of fermentation and the final filtration. The recommended procedure, injection of the aqueous...

TETRASOL is an aqueous solution of purified potassium salts of tetrahydroiso-humulone produced from the alpha-acid fraction of a hop liquid CO2 concentrate extract in an all aqueous process. The product is free of any solvent residues. The benefits of the use of TETRASOL in comparison with traditional hopping are high flexibility in beer bitterness adjusting, improved foam, enhanced cling and light-stability. AVAILABILITY TETRASOL is available in 10% (+/- 0.5%) tetrahydroiso-humulones in aqueous solution ready for direct addition to beer without pre-warming nor dilution. DILUTION If dilution is desired for metering pump requisites for example TETRASOL chould be diluted 10 times. Soft or deionized water equal to nine times the weight of TETRASOL 10 is needed. (Hard water may cause cloudiness). The pH of the soft water is adjusted to 10 to 11 using potassium hydroxide. The 1:9 dilution is prepared by slowly adding the weighed amount of TETRASOL to the stirred soft pH10-11 water (T...

Silicone spray based on special silicone oils and is particularly suitable for care (lubrication) of the zipper at chemical suits. It maintains rubber, plastic and metal Reduces friction Long-lasting separate- and sliding film Protects against freezing (temperature-resistant from -50 to +250°C Free of toxic solvents Available in 400ml spray cans.

Here at Abfad Limited we have over 10 years’ knowledge and experience lining and repairing storage tanks of all different shapes and sizes, above ground, underground, some in good condition, some in bad condition. One thing is clear from our time in this industry, corrosion is the main enemy of the storage tank and shortens its life span considerably. Solvent free single skin tank lining to provide an internal single skin within the storage tank which encapsulates the steel and prevents corrosion taking place within the tank. Fuelavc® double skin tank lining system with class 1 vacuum pressure leak detection monitoring for above and below ground tanks of any size. Fuelvac® provides two levels of protection within storage tanks, it protects the steel from corrosion due to the protective solvent free coatings and the unique nature of the vacuum system, and also provides 24/7 leak detection monitoring of the tank. Speed of installation means that tank down-times are greatly minimised.

ABFAD Ltd have developed the perfect solution to protect damaged and corroded Storage Tanks, a major problem in the industry. The FUELVAC® double skin lining system, Abfad’s patented solvent-free vacuum monitored lining process, bringing a new, innovative dimension to storage tank repairs and tank corrosion protection. Cost and time savings over traditional methods are significant and tank downtime is greatly reduced, which means that the repaired tank can be brought back into full use in a very short timescale; whereas traditional methods of storage tank maintenance can leave the tank owner without the use of a very valuable asset for an extended period of time. The double skin tank is then connected to remote vacuum monitoring applications that check the integrity of the installation every second of every day, ensuring piece of mind and a totally professional approach to tank storage maintenance. Fuelvac® can be installed in above or below ground tanks of any size.