Solar panel assembly - Import export

NSPV PV4.0 Solar branch fuse connector 1500VDC 2 females to 1 cable end Features: TUV certified; Imported PPE insulation material; IP68 degree of protection; Matching with MC4 connectors; Low contact resistance for ≤ 0.25 mΩ; High voltage for 1,5kV DC and high current Max. Output:60A. P.S.: Prices excluding fuse and cable. P.P.S: Cable length is customized.

NSPV PV3.0 Solar branch connector 1000VDC for rubber connector Features: IP67 degree of protection; Matching with MC3 connectors; Low typical contact resistance for ≤ 0.25 mΩ; Flame class for UL94-V0.

NSPV PV3.0 Solar panel connector 1000VDC for rubber Features: IP67 degree of protection; Compatible with MC3 connectors; Low typical contact resistance for ≤ 0.25 mΩ; Flame class for UL94-V0.

NSPV Solar AC connector 3P cable female to panel male type Features: TUV certified; Imported PPE insulation material; IP68 degree of protection; Low contact resistance for ≤ 0.25 mΩ; High current Max.50A(10sqmm). P.S.: Prices excluding cable.

NSPV Solar AC connector 5P cable female to panel male type Features: TUV certified; Imported PPE insulation material; IP68 degree of protection; Low contact resistance for ≤ 0.25 mΩ; High current Max.50A(10sqmm). P.S.: Prices excluding cable.

NSPV Solar AC connector 3P cable female to cable male type Features: TUV certified; Imported PPE insulation material; IP68 degree of protection; Low contact resistance for ≤ 0.25 mΩ; High current Max.50A(10sqmm). P.S.: Prices excluding cable.

NSPV Solar 2to1 Y branch parallel connector 1500VDC Features: TUV approved; Imported PPE insulation material; IP68 degree of protection; Matching with MC4 connectors; Low contact resistance for ≤ 0.25 mΩ; High voltage for 1,5kV DC. P.S.: Cable length is customized.

NSPV Solar straight cable harness with inline fuse 1500VDC Features: TUV approved; Imported PPE insulation material; IP68 degree of protection; Matching with MC4 connectors; Low contact resistance for ≤ 0.25 mΩ; High voltage for 1,5kV DC. P.S.: Prices excluding fuse and cable length is customized.

● The junction box uses the PPE/PA,High rigidity, high temperature resistance chemical resistance, wear resistance and pollution resistance ● The junction box uses the glue to seal, the waterproof effect is better, the fitting interior heat is better. ● This junction box is a three-part design, and the cable adopts horizontal outlet mode, which can reduce the cable bending stress, save the cable usage, reduce the power loss of PV module, and divide the influence of "hot spot effect" into three parts. The influence of high temperature on photovoltaic modules is reduced. ● The diode and the terminal adopt an integrated packaging mode, and the terminal uses red copper

NSPV Solar Y branch parallel fuse connector harness 1500VDC series Features: TUV approved; Imported PPE insulation material; IP68 degree of protection; Matching with MC4 connectors; Low contact resistance for ≤ 0.25 mΩ; High voltage for 1,5kV DC. P.S.: Prices excluding fuse and cable length is customized.

S-Pro is designed for trapezoidal and sandwich roofs. S-Pro can be customized according to roof type. For further info: info@standartaluminyum.com

S-Armor 80 is the solar mounting rail which is the most appropriate rail for universal usage. S-Armor family is compatible with all Standart Aluminium Solar Mounting Systems. Technical Specifications Height: 80 mm Upper Width: 40 mm Lower Width: 40 mm

S-Guard 80 is the solar mounting rail which is the most appropriate rail for universal usage. S-Guard family is compatible with all Standart Aluminium Solar Mounting Systems. Technical Specifications Height: 80 mm Upper Width: 40 mm Lower Width: 40 mm

Knight Optical can offer you Stock and Custom Fresnel Lenses, for concentrated photovoltaic applications in a range of materials such as PMMA Acrylic and Borosilicate. CPV is an application which generates electricity from sunlight. The key difference between this technology and conventional photovoltaics (solar panels) is the inclusion of optical components. Utilising optical components which focuses the sunlight onto solar cells increases the efficiency of the electricity generation. Knight Optical provides fresnel lenses which consist of a flat surface with interspace concentric steps whereby each step corresponds to the surface of a conventional lenses. PMMA Acrylic is a preferred material for CPV systems as it is very lightweight when used in a large size. Specialist grades of PMMA are also utilised which absorb the UV light and thus reduces the effects of solarisation i.e. the yellowing of the optical material due to exposure to UV. Read PDF for full information

PV-NEHP01 Junction Box with solar connectors and cable Cable length is customized.

NSPV PV4.0 Solar fuse connector 1500VDC female cable end Features: TUV&CE certified; Imported PPE insulation material; IP68 degree of protection at 1m,1H; Matching with MC4 connectors; Low contact resistance for ≤ 0.25 mΩ; High voltage for 1,5kV DC and high current for 50Amp. P.S.:Recommended that the Max ambient temperature is 75℃，and not exceed 8 hours in 75-85℃. P.P.S.:Prices excluding fuse and cable.

ARU's dual-axis tracking tracker uses optical real-time sensors, slew drives, and actuators to track the movement of the sun and changes its altitude in real time. It shows higher power generation efficiency than traditional fixed power plants. When exposed to natural disasters, our AI technology secures stability and maximizes energy production with real-time backtracking, scattering technology, wind mode, and snow mode. Though technology research and development, we have obtained 13 types of international patents and certifications including UL. Agrophotovoltaics is a business for farmers, fishermen, and livestock farmers to use their idle land to build a PV power generator structure This is a 'PV double-cropping' project that allows farmers to simultaneously generate income from PV power generation facilities along with farming revenues. There are no revenues during the off-season for crop farming, and annual profits are often lost in the event of a natural disaster.

NSPV PV4.0 Solar fuse connector 1500VDC female male end Features: TUV&CE certified; Imported PPE insulation material; IP68 degree of protection at 1m,1H; Matching with MC4 connectors; Low contact resistance for ≤ 0.25 mΩ; High voltage for 1,5kV DC and high current for 50Amp. P.S.:Recommended that the Max ambient temperature is 75℃，and not exceed 8 hours in 75-85℃. P.P.S.:Prices excluding fuse.

NSPV PV4.0 Solar fuse connector 1500VDC male cable end Features: TUV&CE certified; Imported PPE insulation material; IP68 degree of protection at 1m,1H; Matching with MC4 connectors; Low contact resistance for ≤ 0.25 mΩ; High voltage for 1,5kV DC and high current for 50Amp. P.S.:Recommended that the Max ambient temperature is 75℃，and not exceed 8 hours in 75-85℃. P.P.S.:Prices excluding fuse and cable.

NSPV PV4.0 Solar fuse connector 1500VDC both cables end Features: TUV&CE certified; Imported PPE insulation material; IP68 degree of protection at 1m,1H; Matching with MC4 connectors; Low contact resistance for ≤ 0.25 mΩ; High voltage for 1,5kV DC and high current for 50Amp. P.S.:Recommended that the Max ambient temperature is 75℃，and not exceed 8 hours in 75-85℃. P.P.S.:Prices excluding fuse and cable.

EC03 PV edge connector for bifacial solar modules Edge Nagetive:EC03P-xx; Edge Middle:EC03M_xx; Edge Positive:EC03P-xx; Edge Middle with Twin Cable:EC03MT_xx.

NSPV PV4.0 Solar fuse connector 1000VDC male cable end Features: Imported PPE insulation material; IP67 degree of protection; Matching with MC4 connectors; Low contact resistance for ≤ 0.25 mΩ; Current reaching 30A. P.S.:Recommended that the Max ambient temperature is 75℃，and not exceed 8 hours in 75-85℃. P.P.S.: Prices excluding fuse and cable.

Glass To Glass Edge Connector Edge side connector:EC1-xx; Twin ribbons connector:EC2-xx.

NSPV PV4.0 Solar fuse connector 1000VDC female cable end Features: Imported PPE insulation material; IP67 degree of protection; Matching with MC4 connectors; Low contact resistance for ≤ 0.25 mΩ; Current reaching 30A. P.S.:Recommended that the Max ambient temperature is 75℃，and not exceed 8 hours in 75-85℃. P.P.S.: Prices excluding fuse and cable.

NSPV 1500VDC PV4.0 Solar panel fuse connector series 4PFM type Hot Tags and features: Simple and convenient to install; Effortless to replace fuse to maintain; Instead of traditional methods of fuse holder add fuse add solar panel connector to save costs and expenses. P.S.: Prices excluding fuse.

NSPV 1500VDC PV4.0 Solar panel fuse connector series 4PFF type Hot Tags and features: Simple and convenient to install; Effortless to replace fuse to maintain; Instead of traditional methods of fuse holder add fuse add solar panel connector to save costs and expenses. P.S.: Prices excluding fuse.

NSPV 1500VDC PV4.0 Solar panel fuse connector series 4PFC type Hot Tags and features: Simple and convenient to install; Effortless to replace fuse to maintain; Instead of traditional methods of fuse holder add fuse add cable gland connector to save costs and expenses. P.S.: Prices excluding fuse and cable.

MONO SOLAR PANELS Canadian Solar 395W Solar Panel 132 Cell CS3N-395MS HiKuBlack Canadian Solar 390W Solar Panel 132 cell CS3N-390MS BoB Mono Canadian Solar 400W Solar Panel HiKuBlack CS3N-400MS Canadian Solar 390W Solar Panel 132 Cell CS3N-390MS HiKuBlack Trina 390W Solar Panel 120 Cell TSM-390-DE09C07 Trina 365W Solar Panel 132 cell TSM-365-DE06X.05(II) Trina 360W Solar Panel 132 cell TRI-TSM-360-DE06X Q Cells 400W Solar Panel 132 Cell Q.PEAK DUO BLK ML-G10+ Q CELLS 365W Solar Panel 120 Cell 365QPDG10+ BK Q CELLS 360W Solar Panel 120 Cell Q.PEAK DUO BLK G10+ 360 Q CELLS 485W Solar Panel 156 cells XLG103QPD-BFG Q CELLS 430W Solar Panel 144 cells DUO L-G6.2 SIL Q CELLS 480W Solar Panel 156 cells Q.Peak Duo XL G10.3/BFG Solaria 430W Solar Panel PowerXT-430R-PL Silfab 370W Solar Panel 120 Cell SIL-370-HC

The EPP solar modules consist of solar cells with high efficiency, and a series of quality performance tests according to the strict quality standard are carried out during production to allow the solar modules to function normally in harsh environmental conditions and to ensure the maximum output power from the module when generating electricity.