Ventilation - Import export

High flow industrial roof extractor for the extraction of stale air HELIX BOX MANN industrial roof extractors have an extraction capacity from 21,000 m3/ h to 39,800 m3 / h and are the perfect solution for the extraction of stale air in industrial buildings, warehouses, farms, greenhouses, etc. Main features - Air flow from 21,000 m3/h to 39,800 m3/h - External structure made of galvanized steel. - Overpressure shutter made of galvanized steel. - Propellers made of AISI 430 BA stainless steel. - High quality bearings. - IP-55 three-phase electric motor - V-belts. - Transmission pulleys made of magnesium aluminum. - Engine support with tensioner. - Roof supports. - Air inlet with protection grid. - Anti rain visor.

High-reach diffusers with 3-way air outlet. - Admissible flows from 5,500 m3/h to 63,000 m3/h. - Made of galvanized steel painted in oven-dried polyester powder paint in RAL 7035 gray. - Simple deflection grilles with slats made of polyamide. - Opening regulation from 0º to 90º. - Possibility of supply with double deflection grids. - 30mm METU clamping frame.

AD SMALL PREMIUM evaporative air conditioners for evaporative air conditioning in industrial, commercial, agricultural or livestock premises Evaporative coolers are a natural cooling system that uses water as a cooling element. Its basic operating principle is to suck in the outside air and pass it through some cooling panels moistened with water. Once the air passes through this panel, it cools and increases its humidity. Once this process has been carried out, the air is propelled inside the premises to be air-conditioned and, based on the appropriate renovations and extraction of air, a comfortable comfort temperature and adequate indoor air quality are achieved for people. AD SMALL PREMIUM evaporative air conditioners, develop an air flow from 5,760 m3/h to 17,145 m3/h with an available pressure at a maximum flow of 100 Pa, its cooling capacity is suitable for premises from 67m2 to 255m2

Ceiling fans for the recovery of stratified heat in the ceiling Ceiling fans with DT protection casing can be used to recover the stratified heat on the roof in winter, using the fan in winter allows us to save energy up to 30% Its use can be commercial and / or industrial and its installation can be on ceilings from 4m to 9m in height. The fans can be mounted individually or in groups with their corresponding speed regulator.

3m diameter ceiling fan with remote control and reversible MEGA AXIAL 3000 BRUSHLESS ceiling fans can be used to recover the stratified heat on the ceiling during winter and ventilate in summer, using the fan in winter allows us energy savings of up to 30%. Its use can be commercial and / or industrial and its installation can be in ceilings from 4m to 10m in height. The fans can be mounted individually with their remote control.

Ceiling fans from 4 to 7m in diameter This type of fan provides significant energy savings and is characterized by having large diameter blades that generate an air flow of 96,810 to 529,000 m3/h. They are suitable for installation in any type of premises with ceilings from 4m to 12m high. Winter operation: Its function is to lower and homogenize the stratified hot air on the ceiling, thus reducing the heating needs of the room or premises. Summer operation Decrease in sensitive temperature around 4-6 ºC

Ceiling fans to cool in summer and save in winter DVW ceiling fans allow them to be used to ventilate in the summer and recover the stratified heat on the ceiling in winter, using the fan in winter allows us to save energy of up to 30%. Its use can be at a domestic, commercial and / or industrial level and its installation can be on ceilings from 2.3m to 10m high. The fans can be individually assembled with their corresponding speed regulator or up to 10 units can be grouped using our model RV10 electrical panel with regulator.

VIS MANN industrial air curtains are the perfect solution to prevent cold air in winter and hot air in summer. In addition, they provide an invisible barrier that prevents insects from entering the premises. VIS MANN A - Air only curtains VIS MANN E - Air curtains with electric resistances VIS MANN BAR - Air curtains with water coil

High flow wall fans for extraction and/or ventilation This type of fans provide significant air flows for the extraction and/or ventilation of industrial, livestock or agricultural premises. Main features - Air flow from 21,000 m3/h to 39,800 m3/h - Structure and overpressure slats in galvanized steel to avoid premature corrosion. - Propellers made of AISI 430 BA stainless steel. - High quality bearings. - IP-55 three-phase electric motor - V-belts. - Transmission pulleys made of magnesium aluminum. - Engine support with tensioner. - Side inserts for easy transport.

Evaporative cooling panels type 5090 and 7090 PAD MANN evaporative cooling panels are a totally natural air cooling system with water supply and minimum energy consumption. Its operation is based on circulating an air flow through its interior and depending on the speed, type of panel and thickness, the cooling and humidity increase of the air that passes through it is achieved. We have two different types of panels, the type 5090 which is the one that offers the best cooling performance and is used for evaporative coolers for air conditioning in general and the type 7090 with lower cooling performance but with less pressure drop, its Use is specifically for farms and greenhouses where they have evaporative air conditioning systems with fans that cause a depression inside the premises.

Air long throw nozzle - Admissible flow rates from 50 m3/h to 1,750 m3/h. - Made of polyamide. - Maximum working temperature of 70 ºC. - 45º inclination and 360º rotation. - Supply in boxes of 10 units with all the fixing elements.

High-reach diffusers with 6-way air outlet. - Admissible flows from 5,500 m3/h to 63,000 m3/h. - Made of galvanized steel painted in oven-dried polyester powder paint in RAL 7035 gray. - Simple deflection grilles with slats made of polyamide. - Opening regulation from 0º to 90º. - Possibility of supply with double deflection grids. - 30mm METU clamping frame.

ADIABATIC COOL BOX PREMIUM adiabatic boxes to cool and add moisture to an air flow Adiabatic modules increase the relative humidity of the environment and in turn reduce the air temperature, they are very valuable and efficient systems in UTAS (air treatment units) providing fresh and humid air without the contribution of external energy. The cooling process is based on the evaporation of water that removes energy from the air, yielding sensible heat and cooling the environment. This phenomenon is known as evaporative cooling and its use is common in industrial premises where conventional air conditioning systems are not economically viable, they are systems with very low energy consumption and therefore very economical cold production

Adiabatic humidifiers for humidity supply and air cooling - ADIABATIC COOL Humidifiers or adiabatic modules have become popular for use in conjunction with climate control heat exchangers, UTAs or any other system where it is necessary to increase humidity and cool an air flow. Standard airflows range from 2,100 m3/h to 30,000 m3 / h but we can manufacture equipment with higher capacity. Its operation is completely ecological since it does not use any type of refrigerant gas since the air is cooled by passing the outside air through a panel moistened with water that cools the air and increases its humidity, its electricity consumption is also 80 % lower than other conventional air conditioning systems.

Portable evaporative cooler 10,080 m3/h with 16-speed - ECO FRESC The ECO FRESC portable evaporative coolers are ideal for cooling in a completely natural way and with low local energy consumption of up to 150 m2. To cool the air, evaporative cooling technology is used, which consists of passing the outside air through panels moistened with water. As the air passes through this area, it cools and increases its humidity. The treated air is driven by a fan inside the room and by renewing the indoor air comfort temperatures are reached. The necessary electrical power is 80% less than traditional air conditioning systems and by using water as a cooling element it avoids the emission of harmful gases into the environment. The ECO FRESC evaporative air conditioners have a 16-speed axial fan to adjust the necessary air flow at all times, they also have an electronic control in charge of performing all the equipment′s functions.

FRESC MANN PREMIUM portable industrial evaporative air cooolers from 5,760 to 13,511 m3/h The FRESC MANN portable industrial evaporative air cooler are ideal for cooling naturally and with low energy consumption in all kinds of work areas, event tents, heat sources, etc ... Its basic operating principle is to suck in the outside air and pass it through some panels moistened with water. Once the air passes through this panel, it cools and increases its humidity. By carrying out this process, the air is propelled inside the premises to be air-conditioned, reaching pleasant comfort temperatures and adequate indoor air quality for people. FRESC MANN PREMIUM portable evaporative air coolers develop an air bed from 5,760 m3/h to 13,511 m3/h with an available pressure at a maximum flow rate of 100 Pa.

Industrial evaporative air conditioners with axial fan from 10,080 to 19,080 m3/h ECO COOLER evaporative coolers are a natural cooling system that provide cool, humid air in the room to be heated. To cool the air, evaporative cooling technology is used, which consists of passing the outside air through panels moistened with water. As the air passes through this area, it cools and increases its humidity. The treated air is driven by a fan inside the room and by renewing the indoor air comfort temperatures are reached. The necessary electrical power is 80% less than traditional air conditioning systems and by using water as a cooling element it avoids the emission of harmful gases into the environment. ECO COOLER evaporative air conditioners have a 16-speed axial fan to adjust the necessary air flow at all times, they also have an electronic control in charge of performing all the equipment′s functions.

AD BIG PREMIUM evaporative air conditioners for evaporative air conditioning in industrial, commercial, agricultural or livestock premises Evaporative coolers are a natural cooling system that uses water as a cooling element. Its basic operating principle is to suck in the outside air and pass it through some cooling panels moistened with water. Once the air passes through this panel, it cools and increases its humidity. Once this process has been carried out, the air is propelled inside the premises to be air-conditioned and, based on the appropriate renovations and extraction of air, a comfortable comfort temperature and adequate indoor air quality are achieved for people. AD BIG PREMIUM evaporative air conditioners, develop an air flow from 18,140 m3/h to 36,678 m3/h with an available pressure at a maximum flow of 100 Pa, its cooling capacity is suitable for premises from 300m2 to 615m2. For larger surfaces more units can be installed.

A device for emergency ventilation and intensive care that allows to control and monitor the key parameters of ventilation. ​ It has been designed to work continuously and intensively. It has different ventilation modes, giving it great versatility to treat patients in different phases of invasive ventilation. Control by PLC SIEMENS with a very simple and intuitive interface for maximum security. RESPIRA has real-time measurement sensors for key parameters for respiration, respiration graphs.