Measuring devices - Import export

- Well-visible two-line indication of measured data with backlit LCD display - Easy on-site operation and parameterization - Automatic cyclical scrolling of measured data - Integrated active and reactive energy meters

Measurement of magnetic and electrical signals with STL's unique 26 bit ADC's For measuring electric and magnetic fields the STL's unique 26 bit ADC pioneers works in an underwater system. In addition to deployment and recovery the chain configuration by a single cable used for power and data transmission uses three or more sensors platforms are fully connected to the base station. Environmental and pressure sensors use an ultra low noise isolation preamplifier, and the analogue sensor front end is formed by 3 pairs of UEP Carbon electrodes. The 26-bit analogue to digital converter is what the digital part is based on with a novel high end performance. Geometry compensated signal output through the consequent digital signal processing provides temperature. To achieve the software alignment the tilt sensors are used to achieve the precise settings with a pair of high resolution electric field vector components.

The compact pressure transponders consist of a digital, extremely robust D-line pressure transmitter and a passive RFID module. They obtain their power from the reader and therefore do not require a power connection or battery replacement. The 21D RFID transponders are therefore perfect for convenient on-side reading of instantaneous values, e.g. during inspection tours or safety checks on large vehicles.

The crack length measuring system FRACTOMAT is a system that works according to the indirect potential method, which is used for the exact measurement and control of the crack length and the crack propagation in fracture mechanics samples. The various interfaces allow use in any test set-up, including any other makes of testing machine. The transducer consists of a crack length measuring film (KRAK GAGE), which is glued to the specimen in an electrically insulated manner like a strain gauge and connected to the FRACTOMAT.

The EBATmètre® is a device for measuring height clearances. It is principally used to measure the moving parts of a mechanical watch movement.

VARIOcouple® The VARIOcouple® apparatus for torque and force measurement manufactured by CLA is a very precise instrument mainly used in development laboratories of watchmakers. This instrument allows quantifying and analyzing small torques and forces generated in low stress systems. ACCESSORYS : - Universal Digimes - Universal sample holder for watch movement - VARIOweight - Measurement standard - CLApt1000 - Temperature sensor - Adjustable angular support - Anti-vibration table

Automatic station for rate control of watch movements or watches without straps - Measure at 0 and 24h - Integrated 24h Storage - Possibility to add measuring devices - Power reserve control e.g. 72h - Using a robot - Multi-calibers

The NEOvario is a high-technology device, which is completely compact and integrated. The measuring devices will meet the demanding needs of torque and force measurement fields. ACCESSORYS : - Universal Digimes - Universal sample holder for watch movement - VARIOweight - Measurement standard - Adjustable angular support - Anti-vibration table

The APLUS is a powerful platform for measuring, monitoring and analyzing power systems. The focus is on highest Swiss quality and maximum customer benefit. This universal measurement device is available in three major versions: With TFT or LED display or in top hat-rail version without display. It can be easily integrated into the process environment on site. It provides a wide functionality, which may be further extended by means of optional components. The connection of the process environment may be performed by means of the communication interface, via digital I/Os or via analog outputs.

Memobase Plus is the perfect software to improve your process safety and reliability. It documents the complete lifetime of Memosens sensors offering full traceability with a minimum of paperwork. Memobase Plus turns your computer into a high-performance, space-saving measuring device for up to 4 parallel sensors. You can save and export measurement data and use identical sensors in the laboratory as in the process to achieve truly comparable measurements.

In the chemical and petrochemical industries, 2-wire loop-powered (4-20 mA) measuring devices are in high demand, as intrinsic safety is extremely important especially in hazardous areas. Without any compromises, Promass E 200 meets all of the relevant standards in the process industry such as NAMUR, HART, and SIL. This guarantees a high degree of safety in operation and optimal system availability.

This fully automatic crimping machine stands out from the rest for the high daily productivity it achieves through short changeover times and high availability. This thoroughly tried-and-tested machine is also available with a belt drive. That means optimum force transmission and increased output for long and difficult to process conductors. A supplementary unit that is ideal for a broad processing range. The Komax Gamma 333 PC and PC-B are flexible fully automatic crimping machines offering a variety of efficient processing capabilities. Depending on requirements, these machines can apply two-ended crimp contacts and end sleeves for strands, as well as double crimp connections with three different contacts or seals and sleeves to one end of the cable. Tinning and ink-jet marking are two further options. These models can integrate customer-specific applications like MIL crimping, welding or compaction for a further diversification of production.

Thanks to the robust, dirt-resistant design of the Steelmaster, it is suitable for hot steel applications under production conditions with a lot of dirt and warm product and ambient temperatures. Properties Cutting-edge optics and laser scan technology Extremely high sampling rate Highest accuracy and stability; measurements independent of orientation Non-contact measurement of diameter and ovality Suitable for measurements under harsh conditions Interfaces such as Ethernet IP, Profinet IO, Profibus DP and others Integrated web server in all processor versions. Benefits High operational reliability even under harsh conditions Heat resistant, thanks to integrated heat shield and water cooling Protective system using air purging unit and blower Very robust and durable design Extremely dirt resistant.

The QC 2 system consists of a high precision diameter measuring head, a motorized rotating sample holder with automatic sample ejection and a processor unit USYS 20 with special software evaluating the captured values. The system provides fast and accurate measurements of manufactured parts or cut samples. QC 2 can be used either in quality control (QC) laboratories or on factory floors. It provides operators a simple and repeatable solution for parts measurement and immediate notification of meeting specification within given tolerances. Unlike other micrometers or mechanical indicators that can give errors due to poor zero setting, end play, calibration or are sensitive to user input, QC 2 provides repetabale measurements regardless the operator. Benefits Fast and accurate measurements of manufactured parts or cut samples High precision thanks to laser scan measuring principle Own software for evaluating the captured values.

Thanks to the robust, dirt-resistant design of the Steelmaster, it is suitable for hot steel applications under production conditions with a lot of dirt and warm product and ambient temperatures. Properties Cutting-edge optics and laser scan technology Extremely high sampling rate Highest accuracy and stability; measurements independent of orientation Non-contact measurement of diameter and ovality Suitable for measurements under harsh conditions Interfaces such as Ethernet IP, Profinet IO, Profibus DP and others Integrated web server in all processor versions. Benefits High operational reliability even under harsh conditions Heat resistant, thanks to integrated heat shield and water cooling Protective system using air purging unit and blower Very robust and durable design Extremely dirt resistant.

Laser measuring device for measuring diameter, ovality, circularity, width and height of round products and profiles Properties Cutting-edge optics and laser scan technology Maximum accuracy and stability Orientation-independent measurement Non-contact measurement of diameter and ovality Identification of lumps and neckdowns Extremely high sampling rate Permanently calibrated Integrated interfaces such as Ethernet IP, Profinet IO, Profibus DP and others Integrated web server in all processor versions Benefits • Maximum precision thanks to laser scan measuring principle • Robust and durable design • Extremely dirt resistant • Comprehensive quality control • High operational reliability even under harsh conditions • Measurement of opaque or transparent products • Position measurement possible. For accessories & detailed product information, refer to respective brochures on the following link from our website: https://zumbach.

The MSD models are universally suited and can be used in all cable production lines to measure wires and cables of all types. In tube and hose extrusion lines, they are indispensable aids for measuring pressure pipelines, waste water and heating tubes, and other types of rubber hoses. MSD devices can also contribute to quality monitoring in cold applications in the steel and metal industry. Additionally, the measuring device can be used for non-ferrous and offshore productions. Properties The measuring principle is based on state-of-the-art CCD technology with several point-source LEDs as lighting sources. Non-contact measurement Very high measuring rate Differently coloured LEDs illuminate the measuring axes, for interference-free measuring during simultaneous measurements or reflecting products Integrated interfaces such as Ethernet IP, Profinet IO, Profibus DP and others Integrated web server in all processor versions.

The new line of KW TRIO detectors capture with the highest accuracy, reliability and velocity, even the smallest lumps and neck downs in wires, conductors, optical fibres, cables, tubes and hoses. 3-axis detectors provide more precise detection of short- term faults, because very often, in wire and cable products, the fault covers only a limited angle on the product circumference, e.g. small bumps or blisters. Properties Cutting-edge 3-axis measuring optics Maximum accuracy and stability Can be flexibly mounted in any orientation Non-contact measurement of lumps and neckdowns Extremely high sampling rate Suitable for line speeds up to 3000 m/min. Integrated interfaces such as Ethernet IP, Profinet IO, Profibus DP and others Integrated web server in all processor versions. Benefits Fault detection even at very high line speeds Immune to ambient and scattered light Dust-resistant thanks to built-in air curtain IIntelligent fault processing at the highest level

The processor is used for communication, analysis and display of sensor values for continuous transparency in processes such as: – Wire drawing – Extrusion procedures – In-line or off-line applications – Cutting – Drawing procedures – Tube forming and welding – Taping – Peeling – Centreless grinding – Stranding / assembling – Coating applications Properties Application for specific processor solutions available Processor for monitoring and controlling measuring values Statistical analysis and logging Product recipe management and storage Digital and analogue inputs and outputs Possibility to integrate several sensors Integrated standard host interface FFT/SRL analysis for maximum 4 parameters Zumbach RealTime operating software provides maximum virus protection thanks to embedded software solution.

UMAC WALLMASTER systems from ZUMBACH allow in-line measurements, data acquisition and control during the extrusion of a wide range of products, like tubing, pipe, hoses and cables. Cutting edge digital technology (DSP) opens up measuring solutions for each process and product: • Ultra thin walls • Smallest and largest diameters • Multi-layer products • Cable isolations and jackets Special products requiring an off-line QC measurement can now be measured in-line and relevant parameters monitored continuously. The diameter can also be measured in a combination with the ultrasonic measurement with certain transducer holder. In addition, UMAC WALLMASTER systems provide for real-time QC data, process monitoring, trending, SPC data, statistical charts etc.

RAYEX D XT is a low energy X-ray and high speed scanning system for the measurement of wall thickness, eccentricity, diameter and ovality of multilayer or single layer products in CV lines or others. RAYEXD XT is based on the worlds first system which was able to measure all relevant cable parameters from outside the tube looking through beryllium windows. The RAYEX D XT is protected under international patents CH 685 336 A5, US 5 518 681, US 5 795 531 and other rights. Properties A measuring system for measuring wall thickness, eccentricity, diameter and ovality Wall thickness testing from 0.3 mm Measuring of products between 15 mm … 140 mm Measuring of 3 layers simultaneously Unique X-ray source concept with integrated high-voltage source and micro beam guideway Unique adaptive integration solution for hot or cold measuring solutions Communication via integrated interfaces such as Ethernet IP, Profinet IO or Ethernet TCP/IP Integrated web server in all processor versions.

Precision speed and length measurements are critical for optimization of continuous or quasi-continuous production processes. Proper utilization of these measurements can lead to lower production costs and higher product quality. The ideal sensor must exceed traditional contact encoder performance, increasing reliability and accuracy while minimizing maintenance requirements and material yield. The LSV Laser Surface Velocimeters have been designed as the ideal next generation sensors for non-contact length and speed measurement. They provide precise length and velocity data quickly and reliably for both process control and cut-to- length applications. The LSV 1000/2100 measure reliably on almost any solid surface, whether controlling processes utilizing carbon steel, shiny aluminium or oily sheets, or producing round wire and cable, or manufacturing paper, cardboard or tissue.