Thread terminals - Import export

Screw-in heaters are versatile and intended for heating liquid media in industrial and commercial applications. When selecting, the specific surface load permitted for the respective medium must be observed and checked by the customer. EHK G2 are mainly used for heating hydraulic oil in containers in which the replacement of the heating cartridge without draining the medium must be possible. Ceramic heating cartridge in stainless steel tube ø 50mm, material-no. 1.4512 or material-no. 1.4404. G2″ thread SW70 welded from V2A. Terminal box made of PA6-GF30, impact-resistant and oil-resistant, degree of protection IP66/67. Unheated zone 50mm, surface load 1,5 W/cm², voltage 230/400 V. Special versions on request.

E53 and E55 capacitors have a particularly low series resistance and high pulse strength. Using sophisticated metallizing patterns, our SINECUT slitting technology and clever winding geometries, they are especially suited for the damping of GTO thyristors and low-inductance buffer circuits with high rms currents. Along with their very good ratio of capacitance to volume, these components do also have very good self-healing characteristics without loss of capacitance. Their very low self-inductance makes them suitable for use in high-current applications with medium frequencies. The capacitors of the E53 product family are housed in flame-retardant plastic cans (V0) and filled with solid resin. Special care has been taken both in terms of design and conservative electrical rating to ensure reliable operation even under tough environmental conditions. Connection is usually made through robust axial terminals with internal thread.

In power electronics in general, and especially in low inductance buffer circuits with higher voltages as well as in discharge circuits, the call for capacitors with low inductance tends to pose problems: traditional high voltage capacitors are filled with oil, and the generous bushings required for clearance and creepage as well as internal safety mechanisms add substantially to the self-inductance of the capacitor. Based on decades of proprietary experience in metallizing capacitor films, ELECTRONICON has created a range of high voltage capacitors in self-healing technology, using the opportunities of special metallizing patterns. Despite the high voltage rating, our E51 range is manufactured in dry technology and without expensive bushings. Inside the can made of self-extinguishing plastic, the capacitor element is enclosed in solid resin (PUR). Connection is made through robust flat terminals with internal thread.