Tiling adhesive - Import export

25 KG MEGAFIX TILE ADHESIVE

Polymer reinforced, long lasting, ceramic floor and wall tile adhesive

KAROFiX® SUPER FLEX Cement-Based High Performance Elastic Adhesive Mortar APPLICATION FIELD Provides superior performance in fixing of coating materials such as ceramic, granite, porcelain ceramic, marble, travertine etc. at all sizes on horizontal and vertical surfaces for interior and exterior areas. It may be applied on dry and wet areas (baths, swimming pools, water tanks, terrace, etc.), cement-based plasters and concrete surfaces, floorings with floor heating system, floors exposed to high level of traffic, areas with thermal shock risk, cold storage rooms, floors exposed to vibration, and applications of ceramics over ceramics.

The proportion of the mixture is 0.21-0.24 liters of water / kg Consumption of the mixture from 2 kg / m 2 The consumption of the mixture per 1 mm of a continuous layer of 1.35 kg / m 2 The shelf life of the solution is 2 hours Open time 20-25 minutes. Tile adjustment time 15-20 minutes The curing time of the solution is min 24 hours Adhesion to the base min 1.2 MPa Frost resistance min 50 cycles Base temperature from + 5 ° to + 30 ° C Operating temperature from -35 ° to +40 ° C

TECHNICAL DEFINITION Multi-propose filler for interior use. • Flling holes, cracks, chases • Fixing and bedding • Pasting polystyrene, roses, cornices • Finishing COMPOSITION AND APPEARANCE Powder filler composed of plaster, calcium carbonate, resin, cellulose fibre and various additives. Produces a white paste. ACCEPTED SUBSTRATES All types of interior substrates : plasterboards, plaster blocks, concrete blocks, aerated concrete, brick, earthenware, etc. VIDEO 1,5 - 5 - 15 -25 kg bags on wrapped pallet. 12 kg buckets on wrapped pallet. SUITABLE SURFACES Once completely dry, SEMIN FILLER AND SMOOTH FINISH can be covered with any type of paint, plaster-based filler, paste-like filler and wallpaper paste. For tiling, choose an adhesive suited to plaster substrates. DRYING TIME This depends on the weather conditions, on the type of substrate and on the applied thickness. As a general rule, for 1 cm thickness, SEMIN FILLER AND SMOOTH FINISH dries in 6 hours.

Load capacity: Class A (15kN test load) EN 124 Materials: Frame in extruded aluminium. Cover in extruded aluminium bonded to a composite aluminium honeycomb panel (with a white coating). Stainless steel screw connections. EPDM seal. High-quality gas-lift struts. Features: Modern lightweight-construction access cover with maximum ease of opening. Major weight-savings compared to concrete-filled access covers. Extremely easy to open thanks to gas-lift struts. A safety device is fitted, locking the cover in the raised position. As the cover is not filled with concrete, installation is quicker and simpler. There is a recess of 24mm for laying slabs, tiles, parquet etc. In the case of thin tiles, the difference in height can be compensated for by using a suitable tile adhesive (MAPEI Keralastic) and waterproof building board. Sealed design with a very high-quality finish. Very attractive surface, particularly the visible edges. Inconspicuous corner joints make it easy to connect...

Load capacity: Class A (15kN test load) EN 124 Materials: Frame in extruded aluminium. Cover in extruded aluminium bonded to a composite aluminium honeycomb panel (with a white coating). Stainless steel screw connections. EPDM seal Features: modern lightweight-construction access cover. Major weight-savings compared to concrete-filled access covers. The cover is lifted by the hinge, significantly reducing the effort required. A safety device is fitted, locking the cover in the raised position. As the cover is not filled with concrete, installation is quicker and simpler. There is a recess of 24mm for laying slabs, tiles, parquet etc. In the case of thin tiles, the difference in height can be compensated for by using a suitable tile adhesive (MAPEI Keralastic) and waterproof building board. Sealed design with a very high-quality finish. Very attractive surface, particularly the visible edges. Inconspicuous corner joints make it easy to connect tiles, slabs etc. Opening with the...

Load capacity: Class A (15kN test load) EN 124 Materials: Frame in extruded aluminium. Cover in extruded aluminium bonded to a composite aluminium honeycomb panel (with a white coating). Stainless steel screw connections. EPDM sealing Features: Modern lightweight-construction access cover. Major weight-savings compared to concrete-filled access covers. Opening the light cover couldn’t be easier. As the cover is not filled with concrete, installation is quicker and simpler. There is a recess of 24mm for laying slabs, tiles, parquet etc. In the case of thin tiles, the difference in height can be compensated for by using a suitable tile adhesive (MAPEI Keralastic) and waterproof building board. Sealed design with a very high-quality finish. Very attractive surface, particularly the visible edges. Inconspicuous corner joints make it easy to connect tiles, slabs etc. Opening with the Lift-Off System: As a cover inside buildings (pedestrian traffic only), which can be opened by 1-2...

Galvanized paint mixer. With perforated rubber pad for hanging. Suitable for mixing high viscosity materials such as tile and construction adhesives, mortars, premixed plasters and concrete.

We're Azulejos Gimenez Spain's Nº1 Manufacturer and Exporter of Wall and Floor Tiles. Large quantities of ceramic wall and floor tiles, porcelain, marbles, sanitary-wave, taps, doors, windows, roof tiles, tile adhesive, cements, brick, etc. Transportation: shipping/delivery is provided, all in. Products Guaranteed according by rules C.€. Documents C/O are provided if it's necessary. For any enquiries please be free to contact us.

We're Azulejos Gimenez Spain's Nº1 Manufacturer and Exporter of Wall and Floor Tiles. Large quantities of ceramic wall and floor tiles, porcelain, marbles, sanitary-wave, taps, doors, windows, roof tiles, tile adhesive, cements, brick, etc. Transportation: shipping/delivery is provided, all in. Products Guaranteed according by rules C.€. Documents C/O are provided if it's necessary. Please, contact us for more info.

We're Azulejos Gimenez Spain's Nº1 Manufacturer and Exporter of Wall and Floor Tiles. Large quantities of ceramic wall and floor tiles, porcelain, marbles, sanitary-wave, taps, doors, windows, roof tiles, tile adhesive, cements, brick, etc. Transportation: shipping/delivery is provided, all in. Products Guaranteed according by rules C.€. Documents C/O are provided if it's necessary. We manufacture and supply tiles stocks. We would like to become your supplier of choice. Any interest, please contact us for more details.

Large quantities of wall and floor ceramic tiles, porcelain, marbles, sanitary-wave, taps, doors, windows, roof tiles, tile adhesive, cements, brick, etc. Sales from Spanish factories directly. Transportation: shipping/delivery is provided, all in. Products Guaranteed according by rules C.€. For any enquiries please, be free to contact us .

We're Azulejos Gimenez Spain's Nº1 Manufacturer and Exporter of Wall and Floor Tiles. Large quantities of ceramic wall and floor tiles, porcelain, marbles, sanitary-wave, taps, doors, windows, roof tiles, tile adhesive, cements, brick, etc. Transportation: shipping/delivery is provided, all in. Products Guaranteed according by rules C.€. Documents C/O are provided if it's necessary. For any enquiries please be free to contact us.

Aluminum tube 400ml Aluminum tube, turnable, with plastic screw connections at front and back Suitable for 310 or 400ml 1K cartridges or sausage packs Application example: kitchen and bathroom tile joints, acrylic joint adhesive… Lithium-ion battery pack with 3.6V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion power 3000N (300kg) Extrusion rate with speed control 50 – 330mm/min Automatic pressure reduction to avoid chemical materials drops out. Performance: 30 cartridges of 310ml Silicone for a fully charged battery at room temperature. Benefits Continuous and clean work. Less fatigue while processing high viscosity adhesives. Automatic pressure reduction to avoid chemical materials drops out. Free of annoying air tube or electric cable on working place. Charger: IP30 // Class 2 Input: 100 – 240 V ~ 50/60Hz 30W Output: 3.6V A 2A CE checked and GS proved Packaging Dyn

Aluminum tube 400ml Aluminum tube, turnable, with aluminum screw connections at front and back Suitable for 310 to 400ml 1K cartridges or sausage packs Application example: from kitchen and bathroom tile joints to auto windscreen adhesive Lithium-ion battery pack with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion power 5000N (500kg) Extrusion rate with speed control 50 – 330mm/min Automatic pressure reduction to avoid chemical materials drops out. Performance: 45 cartridges of 310ml Silicone for a fully charged battery at room temperature. Benefits Continuous and clean work. Less fatigue while processing high viscosity adhesives. Automatic pressure reduction to avoid chemical materials drops out. Free of annoying air tube or electric cable on working place Charger: IP30 // Class 2 Input: 100 – 240 V ~ 50/60Hz 30W Output: 10.8V A 2A Security: CE and GS checked

Aluminum tube 600ml Aluminum tube, turnable, with aluminum screw connections at front and back Suitable for 600ml 1K sausage packs or 310ml to 600ml cartridges Application example: from kitchen and bathroom tile joints to auto windscreen adhesive Lithium-ion battery pack with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion power 5000N (500kg) Extrusion rate with speed control 50 – 330mm/min Performance: 45 cartridges of 310ml Silicone for a fully charged battery at room temperature Benefits Continuous and clean work. Less fatigue while processing high viscosity adhesives. Automatic pressure reduction to avoid chemical drops. Free of annoying air tube or electric cable on working place. Charger: IP30 // Class 2 Input: 100 – 240 V ~ 50/60Hz 30W Output: 10.8V A 2A Security: CE and GS checked Packaging DynamicMax Type HPS-6T-10.8V Li-Ion 1 pc. Li-Ion battery pack 10

Hydroxypropyl Methyl Cellulose HPMC TK200M CAS No : 9004-65-3 HPMC TK200M is Hydroxypropyl Methyl Cellulose,which is a cellulose-based polymer, HPMC is cellulose ether that have hydroxyl groups on the cellulose chain substituted for a methoxy or hydroxypropyl group. HPMC is used as a thickener, binder, and film former in construction,agrochemicals, coatings, ceramics, adhesives, inks, and various other applications. Hydroxypropyl Methyl Cellulose(HPMC) is designed to enhance the quality and processing characteristics of construction materials such as tile adhesives and dry mix mortar,plasters,ceramic,self levelling etc. it can increase good workability and good water retention ,excellent open time, slip resistance, impact resistance, adhesion and shear strength.

DESCRIPTION IZOTEX MAXI 250 is flexible ,waterproofing membrane made of PP/PE/PP layers USAGE AREA It is used for waterproofing and damp-proofing under ceramic tile ADVANTAGES - It is %100 waterproof , high water pressure resistant and damp proof - It is a flexible material that allows ease of application at hard workable corners , floor and wall joints , tight angles - It has strong mechanical bonding to the adhesive and surface. Heat or other toxic elements are not used for bonding - It is is a lightweighted APPLICATION: 1. The membrane is cut and prepared in a required size, according to the application area 2. C2 class tile adhesive mortar is applied to the surface with notched trowel 3. It is placed on the surface and air bubbles is removed with a flat side of the trowel 4. Joints should be bonded considering the direction of water flow and there should be 5 cm overlaps at joints 5. The surface is covered with coating materials

DESCRIPTION: IZOTEX EXTRA 220 is flexible , W1 class waterproof membrane which is composed of polyurethane and polypropylene. USAGE AREA: It is used on the floors and walls of Terraces & Balconies to ensure waterproofing under ceramic tiles. ADVANTAGES - It is %100 waterproof, high water pressure resistant and damproof. - It is applied by using C2 class tile adhesive or IZOTEX T-85 Adhesive. - It has strong mechanical bonding to the adhesive and surface. Heat or other toxic elements are not used for bonding. - It is a flexible material that allows ease of application at corners and wall joints. APPLICATION - IZOTEX T-85 ADHESIVE is applied with a roller to the surface. - IZOTEX EXTRA 220 Waterproofing Membrane is bonded to the surface. - Joints should be bonded considering the direction of water flow and there should be 10 cm overlaps at joints. - The surface is covered with coating materials such as ceramic, marble etc.

The Natron 314 Series UV ink is a neutral is formulated for printing on a wide range of applications, both hard and flexible. This UV ink for digital printing has excellent adhesion on glass, tile, metal, acrylic, and soft (PVC, TPU) materials. This UV inkjet ink is available colors are Cyan, Magenta, Yellow, Black, White, and Varnish. Combined with the Natron UV ink adhesion promoters, this UV inkjet ink enables companies to achieve full-color graphics and images substrates with low surface energy such as polypropylene. Use this ink is compatible with any UV printer that has Ricoh Gen 4, Gen 5, and Standard Gen 6 print-heads. The 314 Series UV inkjet ink is Prop. 65 compliant. It is safe to use and free from any harmful chemicals or harmful naturally occurring substances.