Cable - Import export

Inner Door Release Locking Latch Bowden Cable Rear 1U4839099B for Skoda Octavia MK1

Inner Door Handle Release Lock Latch Bowden Cable Front 13186768 for Opel Corsa D 5 Door

With its 4 lines, BEMKA CABLE has the capacity to produce 6M meters of cable per month. It serves its customers with H05VV-F / H05VVH2-F AND H03VVH2-F / H07VV-K - H05VV-K / H05V2V2-F products from 2x0.50 to 3G1.5 as cables.

With its 4 lines, BEMKA CABLE has the capacity to produce 6M meters of cable per month. It serves its customers with H05VV-F / H05VVH2-F AND H03VVH2-F / H07VV-K - H05VV-K / H05V2V2-F products from 2x0.50 to 3G1.5 as cables.

Safety class rating IP20 Available in 7U, 9U, 12U, 16U and 20U heights Mono-block welded top and bottom cases Powder painted in RAL 7035 or RAL 9005 Aluminum extruded glass door frame 4mm impact resistant smoked glass 3 grounding points (bottom, side panel and front door) Side panels: 2x sliding lock and a key lock and easily detachable 19” galvanized profile rails marked with U height position Roof is prepared for fan units (punched out entries)

CAT 5 e U/UTP CAT 6 U/UTP LZSH CAT 5 e F/UTP LZSH CAT 6 F/UTP LZSH PROFIBUS DP CCTV 2+1 CCTV 4+1 HFFR DT-8

https://www.sumpas.com.tr/sumpas-pump-motor_4_c_en.html

all low voltage cable

Belit Elektronik is able to make energy, battery cables and battery management system (BMS) cables up to 150 mm2 cross sections in line with the needs of the power electronics sector.

Use of various types of connectors such as spox, micro-fit and mini-fit. Battery temperature measurement by using ntc over the cable lugs.

Sample of UPS power and signal cable assemblies together

Twisted cables for transistor(IGBT) and thyristor, 3.96 mm connectors, 2.8 faston terminals and shrink tube assembly. Leoni H05V-K cables.

Tachograph cable harness

Cut to length, crimped and labeled electrical cable. Escubedo multisplices terminals crimped to the end.

Belit Elektronik makes wire harnesses in various configurations, density and according to demands. 100% control of cable assemblies are done with various test equipments as a result preventing future damages and loss of time. In line with customer demands, Belit Elektronik can use one or more of materials together that hold cables such as cable ties, tubing, heat shrink tubing, cloth tape together.

Belit Electronic manufactures the cable assemblies, wire harnesses and battery cables needs of the UPS industry, which it has been closely following for many years.

In line with the needs of the relevant sectors, Belit Electronic has the ability to produce cables in a wide variety from a single cable to cables with hundreds of terminal connections.

S-Armor 80 is the solar mounting rail which is the most appropriate rail for universal usage. S-Armor family is compatible with all Standart Aluminium Solar Mounting Systems. Technical Specifications Height: 80 mm Upper Width: 40 mm Lower Width: 40 mm

Today, electrical and wired devices are the most needed products. Computers, televisions, internet, chargers or many machines are used wired. In order for the cables to have a long service life and be used without problems, they must be very well maintained. For this, there are also cable regulators. These regulators prevent and protect the cable from damage. In this way, there are no situations such as breaking, breaking, crushing or bending. It is one of the most preferred materials.

Novelty Steel is an experienced fabricator of structural steel fabrications for plant constructions such as Bulk Handling Equipment, HRSG plants, Steel and Wood Industries. Some examples of the fabrications are: Steel Silos and tanks Inlet Ducts and Silencers Stair Towers Bunkers and Hoppers Pipe Supports Exhaust Stacks Our modern steelwork fabrication shops have computer-aided design and detailing (CAD), which is linked directly to factory floor computer numerically controlled (CNC) machinery, creating a genuine seamless CAD/CAM environment. The accuracy of the computer-generated details being transmitted directly to the CNC machinery increases the quality standards of the production. Novelty Steel has adapted EN 1090-2 standards into its manufacturing processes supervised by experienced quality management team.

Perforated Cable Tray & Pre-Galvanised Cable Tray. The E-LINE UKS range of pre-galvanized snap-on trays are manufactured according to TSE and ISO 10143 standard. They are manufactured in standard 3 mr. lengths. It is designed to support cable installations in indoor spaces of facilities and buildings.

For futher details, please contact us and visit our website

Cut and stripped cables soldered to the pcb. Short wire processing with our Komax Kappa.

Power distrubution unit wire harness; electromechanical assemblies, circuit breaker assembly and labels

Shielded cable assembly, dsub connector soldering and metal dsub hoods.Solder type D-sub connectors are the most commonly used. The quality of workmanship is very important in the cable connection of the D-sub connector. The use of appropriate equipment and approved solder wire also affects solder connection quality and reliability. All our cables with D-sub connectors 100% electrically tested.

Samples for shielded cables. Shield types are aluminium foil and copper braid.

AMP timer series or commonly used automotive terminals crimping, flry cbles.

Solder type D-sub connectors are the most commonly used. The quality of workmanship is very important in the cable connection of the D-sub connector. The use of appropriate equipment and approved solder wire also affects solder connection quality and reliability.