Turning system - Import export

Turn table, especially suitable for orbital components with higher quantities and can be connected to all Orbitec controllers. Package includes: — Turning device — 3-jaw chuck — Interchangeable jaws — Chuck key — Durable multi-positional torch arm with central mechanical clamping — Ground cable — Interconnection cable with wire and AVC outlet Special versions available on request.

Profitable turn-key systems Accuracy, reliability and throughput are essential for the success of any material handling in industrial processes. Lödige Industries provides integrated solutions for an efficient material flow from goods-in, through the production process and goods-out, including tracking and stock control functions throughout. We plan, install and commission these solutions and provide an effective life-cycle service support to strengthen your competitive edge. Working closely with our customers we plan, simulate and implement conveyor solutions and turn them into profitable turn-key systems. Thanks to our industry-specific expertise, we optimise your material flow operations, increase the performance of your system and help to reduce operating costs significantly. We are unique in providing the complete solution with in house expertise: System analysis, planning, design, manufacture and supply of material handling systems, management software, installation, commissi

Other information Series 2828 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every link Series 3838 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every link Series 4040 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 5050 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 1000 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 2928 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every other link Series 3938 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every other link Series 4140 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 5150 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 1000 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 4040HD Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 400 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 5050HD Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series R7728 Inner height hi: 32 mm Inner widths Bi: 50 - 300 mm bending radii R: 100 - 300 mm Pitch: 56 mm E-Tube, swivel lid Series R7838 Inner height hi: 42 mm Inner widths Bi: 50 - 300 mm bending radii R: 125 - 350 mm Pitch: 67 mm E-Tube, swivel lid Series R8840 Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Series R9850 Inner height hi: 80 mm Inner widths Bi: 75 - 462 mm bending radii R: 200 - 1000 mm Pitch: 91 mm E-Tube, swivel lid Series R8840HD Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 400 mm Pitch: 91 mm E-Tube, swivel lid Series R9850HD Inner height hi: 80 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Assembly tool for E4-series For the practical opening and closing of the E4 series. Big savings in assembly time Assembly tool for E4-series ATEX/ESD: Excellent match with special material igumid ESD (on request). "Mounted on the side" unsupported application possible High torsional stiffness System E4/4 proven in long travels Other information Series 2828 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every link Series 3838 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every link Series 4040 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 5050 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 1000 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 2928 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every other link Series 3938 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every other link Series 4140 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 5150 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 1000 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 4040HD Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 400 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 5050HD Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series R7728 Inner height hi: 32 mm Inner widths Bi: 50 - 300 mm bending radii R: 100 - 300 mm Pitch: 56 mm E-Tube, swivel lid Series R7838 Inner height hi: 42 mm Inner widths Bi: 50 - 300 mm bending radii R: 125 - 350 mm Pitch: 67 mm E-Tube, swivel lid Series R8840 Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Series R9850 Inner height hi: 80 mm Inner widths Bi: 75 - 462 mm bending radii R: 200 - 1000 mm Pitch: 91 mm E-Tube, swivel lid Series R8840HD Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 400 mm Pitch: 91 mm E-Tube, swivel lid Series R9850HD Inner height hi: 80 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Assembly tool for E4-series For the practical opening and closing of the E4 series. Big savings in assembly time Assembly tool for E4-series E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining, separating and opening of the E-Chain® and E-Tubes. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. E4/4 "Mounted on the side" - Travel distances over 200 m "Mounted on the side" - Travel distances over 200 m Extensive unsupported lengths for "side-mounted" applications Roller E-Chain® links available (with roller chain) Max. travel distance: 200 - 800 m High torsional stability Manifold interior separation potentials Large accessory kits Typical industrial sectors and applications RTG, quayside cranes, many other types of cranes Composting plants Gypsum, concrete, chemical and mineral plants, as well as agricultural plants Machine tools: unsupported, side-mounted applications Construction machinery ESD applications Heavy machinery Steel works Shipyards Welding plants ATEX/ESD: Excellent match with special material igumid ESD (on request). "Mounted on the side" unsupported application possible High torsional stiffness System E4/4 proven in long travels

Knight Optical can supply you with custom made Diamond turned aspheric lenses for use within autonomous vehicle LiDAR systems. Autonomous vehicle LiDAR systems create driverless cars. Whereby the system produce autonomous vehicles which can perform complex manoeuvers and drive in public with little or no input from a user. Spherical aberration occurs in common singlet lenses, which results in an image that appears distorted, aspheric lenses correct spherical aberration. An aspheric lens surface is designed non-spherical, which allows a single component lens to collimate or focus highly divergent rays potentially replacing a multi-lens system. This in turn provides the LiDAR system with a better signal quality, at lower costs whilst making the system more compact. Knight Optical offers diamond turned aspherics from a range of suitable NIR materials for autonomous vehicle LiDAR including N-BK7 or equivalent, sapphire, quartz, UV fused silica, amongst others. SEE PDF

We can supply you with a custom made Diamond turned aspheric lenses for use within Thermal Imaging Cameras. Thermal Imaging Cameras work similarly to traditional visible camera systems; while traditional cameras form images using visible light; thermal cameras form images using infrared radiation; operating in wavelengths as long as 14µm. Spherical aberration occurs in common singlet lenses, which results in an image that appears distorted, aspheric lenses correct spherical aberration. An aspheric lens surface is designed non-spherical, which allows a single component lens to collimate or focus highly divergent rays, potentially replacing a multi-lens system. This in turn provides the camera system with a better image quality. Knight Optical offers diamond turned aspherics from a range of infrared materials including Germanium (Ge), Calcium Fluoride (CaF₂), Zinc Sulphide (ZnS), Zinc Selenide (ZnSe), Aluminium (Al) and chalcogenide glasses like AMTIR (Ge33As12Se55 ) PDF FOR INFO

M3 starter package, keypad operation via a cable connection

S3 starter package, push-button operation via a cable connection or wireless RF connection.

Our gwk engineers are passionate about developing technical solutions and this is what we as manufacturers want to prove in the area of cooling towers with our gvk/ghkv series. We see it as our task to understand the entire process of our customers. Therefore we have focused on quality and longevity for the products gvk/ghkv. The cooling towers are part of a central cooling tower system, supplied turn-key and regulated with a freely programmable microprocessor control system or programmable logic control. They are used for dissipation of excess heat from production systems with a higher temperature level and they operate on the principle of evaporation. This is an important consideration for environmentally conscious industries.

Id4000-70-PVC-Turn&Tilt Window Modern system of PVC inward opening windows Turn&Tilt based on German technology and German profiles – ALUPLAST. Available in white, or one or both sides covered with film in colours. Also available film with wood structure and wood design.

CNC machined parts and components made by milling and turning with machine centers and multi axix sliding head CNC lathes from alluminium, steel, plastics ecc. Application: heating, cooling and air conditioning systems and appliances

turning system Glasfibre / alu - yellow Art. 172124: Glasfibre / alu - 2 x 1m20 Art. 172155: Glasfibre / glasfibre - 2 x 1m50 Art. 172308: Glasfibre / alu - 2 x 3m Art. 173151: Glasfibre / alu - 3 x 1m50 Art. 173169: 3 x Glasfibre - 3 x 1m50

turning system Glasfibre / alu - yellow Art. 172124: Glasfibre / alu - 2 x 1m20 Art. 172155: Glasfibre / glasfibre - 2 x 1m50 Art. 172308: Glasfibre / alu - 2 x 3m Art. 173151: Glasfibre / alu - 3 x 1m50 Art. 173169: 3 x Glasfibre - 3 x 1m50

Turn Table, precisely provide to welding by turning clockwise or counterclockwise of parts connected to it horizontally. It also enable movement in the rotation axis. . The work table is operated with a T-slot turntable to ensure that the workpieces are fully fixed to the work table. It is designed with the aim of increasing efficiency, eliminating the need for welding in difficult positions and considering ergonomics of employees.

The Frame Welding Machine is made of welded parts of different sizes and is designed to obtain the desired special H profiles. The machine body and the welding heads are fixed and the workpiece provide to be welded on both sides of the part to be welded by moving by means of driven conveyors. The hydraulic cylinders in the system provide the positioning of the H profile placing and fixing during welding.The system has adjustable backrests and accessories for the roofing of the conveyor group.The system has a hydraulic piston loading unit. The system might turn beam 90 degree with maximum weight and maximum dimensions by means of chain or mechanical structure.

RAMOS E/M series Raman spectrometers are designed on the basis of research-grade optical microscopes allowing the realization of the following light microscopy methods: - Raman measurements - Transmitted light - Reflected light (bright field and dark field illumination) - Confocal microscopy - Fluorescence measurements - Polarization contrast and phase-contrast imaging - Differential interference contrast 3D scanning laser Raman microscopes provide rapid, high sensitivity analysis. The innovative approach to system design of Raman spectrometers ensures extremely high temperature and temporal stability of spectral measurements. All RAMOS E200 system components are fully integrated within an optical microscope providing compactness and mobility of the system. In RAMOS M350, M520, M750 systems external imaging spectrographs are connected via optical fibers. Raman measurements with the RAMOS E/M Series systems can be started in several minutes by turning a system key.

DESCRIPTION compact design. made up to our German technology, to meet all the international and the European standards. Our machine can handle a large type of vial bottles , types and shapes SPECIFICATION Machine is made up to the international GMP regulations Turn table feeding system Type of metal used S.S 316 Double Sterilizing nozzles system before and after filling. 2 diving filling nozzles 2 Peristaltic pumps Double star filling and capping system Double caps vibrator feeding system 1 Rubber vial stopper mushroom, 2 aluminum flip caps Rotary capping servo system Delaying bottles conveyor system Herma labeling head HMI and SCADA system with interactive touch screen control system Certifications ISO 90012015, OHSAS 180012007, ISO 500012011, ISO 450012018 Available certification up on your request UL, CE, GMP, FDA, ASME. Available documents up on your request I.Q , O.Q , P.Q, DQ.

Handling Systems for Handling Printed Circuit Boards JUKI’s handling solution includes a wide range of reliable products to assure the secure handling of printed circuit boards involving SMT manufacturing conveyors; loaders and unloaders; buffers for PCBs; other systems such as turn units, stacker units; customised solutions for individual customer requirements etc. JUKI believes in durability and reliability. Our handling products are suitable for the requirements both of small and large production systems – while providing a highly attractive price performance ratio. Our partner Electro Design has more than 30 years of expertise in the development and manufacturing of handling systems for the electronic industry. In 1987, the company marketed its first conveyor belt and has since sold about 5,000 units to customers worldwide.

EMKA offers a comprehensive product range of ingenious locking technology from a single source. The modular program structure allows a unique variety of components: quarter turns, locking-systems, handles, hinges and gasketings. The high quality and product standards are guaranteed by an excellent manufacturing know-how and by the certified process control according to ISO 9001. The EMKA Quarter turn for padlock Program 1000 series are very simple and robust fastenings, most of which are operated by a widely available key or tool. When padlock is fitted with the right diameter, knob is easily locked. This item is ideal for applications where regular access is required.

EMKA offers a comprehensive product range of ingenious locking technology from a single source. The modular program structure allows a unique variety of components: quarter turns, locking-systems, handles, hinges and gasketings. The high quality and product standards are guaranteed by an excellent manufacturing know-how and by the certified process control according to ISO 9001. The 1A-320 series is a range of quick fasteners from Emka that can be assembled and disassembled without the use of tools. It is delivered with the insert unit and a locking plug. It has a self-sealing construction, and provides the user with an acoustical and visual checking while latching the snap-in pin. The series is ideal for door gauges ranging from 1.5 mm to 2.0 mm.

EMKA offers a comprehensive product range of ingenious locking technology from a single source. The modular program structure allows a unique variety of components: quarter turns, locking-systems, handles, hinges and gasketings. The high quality and product standards are guaranteed by an excellent manufacturing know-how and by the certified process control according to ISO 9001. Quarter turns, Compression latches, Heavy duty latches for big door gaugesKind of lock

EMKA offers a comprehensive product range of ingenious locking technology from a single source. The modular program structure allows a unique variety of components: quarter turns, locking-systems, handles, hinges and gasketings. The high quality and product standards are guaranteed by an excellent manufacturing know-how and by the certified process control according to ISO 9001. Emka compression latch has a design that provides resistance to vibration. Based on the location of installation as well as operating conditions, particular checks and/or added fastening measures are required. The lock type is compression latch and the mounting method is screw-on. The enclosure is made of zinc die GD-Zn.