Hydraulics - Import export

The instalation for squeezing of pasty and viscous products from vessels with volume of 500 or 1000 liters into the dispenser. Lifting of a carriage with a vessel and squeezing of the product out of the vessel is done with a hydraulic cylinder.

Gear pumps of the G11-2 and G11-1 types and pumping units of the BG11-2 type are designed to pump mineral oil into the lubrication systems of machine tools and other stationary machines. Eccentric piston pumps of H400 ER(UR), H401ER(UR), H403ER(UR) types are designed for for lubricant injection in hydraulic systems of machine tools, presses, lifts and other machines. Oil gear pumps of NShM type and ANShM type units are designed for pumping oil products, as well as fuel oil in boiler installations.

Press features: Rated force: 1000 kN; Working stroke: 300 mm; Working pressure: up to 160 bar; Running time: 6 seconds; Total power of engines: 2.2 kW; Power supply: 380 V, 50 Hz; Control: semi-automatic (sensors); Dimensions: 1100 * 1000 * 2110 mm Weight: 2,7 t.

Press Features: Rated force: 400 kN; Working stroke: 300 mm; Working pressure: up to 160 bar; Running time: 33 seconds; Total power of engines: 4 kW; Power supply: 380 V, 50 Hz; Control: semi-automatic (sensors); Dimensions: 1100 * 1000 * 2110 mm Weight: 2,5 t.

The gamma of produced hydraulic cylinders with a diameter of the sleeve from 40 to 200 mm, a diameter of rods from 20 tо 110 mm and stroke action from 100 tо 2000 mm. Application: mobile machines in mining industry, Oil & Gas industry, road-building industry, railway industry, municipal machinery, operation of buildings and constructions, forestry and wood industry (including cylinders for hydromanipulators), agriculture (agricultural machines for husbandry), building (including hydraulic cylinders for excavators, cranes, specialtechnique), transport engineering, machine tools industry and shipbuilding.

Used in agricultural, road construction, utility machines and other equipment. Piston double-acting hydraulic cylinders. Maximum pressure: 200 ... 280 bar Rated pressure: 160 ... 250 bar

Design features: - cast iron body; - built-in check valve and adjustable relief valve; - the chrome-plated spool; - pneumatic control.

Variable displacement axial-piston pumps in swashplate design are intended for hydraulic actuators combined of pump and motor, operating in closed circuit systems. Operate in stroke of mobile machines – harvesters, concrete mixers, paving compactors and other.They are used for driving mobile machines, like combines, or rotating technological equipment, like transit mixer drums, etc. Axial-piston pumps are easily controlled and relatively compact. Pump flow is directly proportional to the cylinder block speed and displacement varied with the swashplate position. Flow direction is reversed with a tilt of the swashplate in either of the opposite directions from its neutral position.

Gear pumps series "T" are manufactured with left, right and reversible rotation of drive shaft hydraulic systems of various mobile machines: trucks, truck mounted cranes, aerial work platform, municipal vehicles and other types of machines. ♦ Mounting flanges and shafts according to European (ISO) and Italian (UNI) standards. ♦ Direct installation on PTO. ♦ High efficiency for the whole working life. ♦ Rear and side ports. ♦ Low working noise. Displacements 16-150 cm3/rev Pressure Max. continuous pressure - 290 bar Max. intermittent pressure - 315 bar Max. peak pressure - 325 bar Rotational speed Max. speed - 3000 min-1 Min. speed - 300 min-1

Gear pumps Series ‘К’ are manufactured with thru-bolt body of rolled aluminium, usage of solid sleeves of high-strength aluminium alloy and PTFE bearings. Gear pumps series ‘К’ are manufactured under the standard ISO, DIN, SAE.