Application of epoxy resin - Import export

Rotafix Zeroset Anchor Grout is a 2-part high strength epoxy system that is used for the fixing of metallic objects into concrete such as anchors and studs. Rotafix Zeroset Anchor Grout has been specifically designed for setting at low temperatures in smooth-walled, diamond drilled holes. This chemical anchor will displace water from a hole then cure under any residual water. This high-performance chemical anchor grout has been approved by the Department of Transport for parapets and street lighting. Additional Information: Compressive Strength: 70N/mm2 Tensile Strength: 16N/mm2 Flex Strength: 32N/mm2 Workable for 20 minutes at 20°C Available Sizes: 500cc (Product code: 3542)

DELO-DUOPOX are two part epoxy resin adhesives for bonding, casting and sealing of joints. Providing excellent adhesion to many materials, these two part epoxies are ideal in stressed or extreme conditions, including automotive and engineering applications. Two part epoxies are cold-cured, high-strength materials, which can be used where curing with heat is not an option. They cure when the two components are mixed together in the correct ratio. Product dependant, most versions are available in DELO-AUTOMIX cartridges, which present the two epoxy components (resin and hardener) in the correct ratio via a dispensing / mixing cannula. A wide range of curing properties are available, with rapid cure versions that are firm to touch in less than 10 minutes, to versions that are firm to touch in 8 hours. They offer high chemical resistance and are available in a wide range of viscosities. ** Click for more **

DELOMONOPOX epoxies are one part, heat cured epoxy resin adhesives for bonding, casting and sealing of joints. The epoxy resin adhesives are high strength materials that can be used as alternatives to riveting, welding and brazing in high stress applications. Epoxies exhibit excellent adhesion to metals, ferrites and ceramics. Special advantages of epoxies include their resistance to temperature, chemicals and low water absorption. They will also protect against corrosion. The epoxy resin is supplied ready to use with no mixing required. Curing occurs in 15-75 minutes @ 130-180 degrees C. Versions are available with good flow properties or with high run-off resistance. ** Click for more **

DELO-KATIOBOND UV curing (320-400nm) and light activated (400-550nm) epoxy adhesives are one part solvent free epoxies suitable for bonding, sealing and potting applications. DELO-KATIOBOND light activated adhesives can be used in opaque applications, as once the adhesive has been initiated via visible light, curing starts due to the decomposition of the photo-initiator and continues to completion. The curing is by cationic polymerisation, hence the product name Katiobond. Information on UV Curing Lamps can be found here. The range has good temperature resistance, up to 180 degrees C and excellent chemical resistance, making them ideal for automotive and harsh environment use. The epoxies are dry to touch after cure (no oxygen inhibition occurs). Cured products exhibit low shrinkage, resulting in low stress on delicate devices. Low water absorption and very low ionic content make them ideal for electronic applications. ** Click for more **

We can install epoxy flooring quickly with minimal disturbance to your business. Benefits: Cost effective flooring solution Reduces dust Hard wearing Easy to clean Chemical resistance