Components- electronic - Import export

At Merefields Electronics we have built a network of suppliers and manufacturers to provide our customers with total electronics distribution. Our Electro Mechanical product range includes Electronic Components and we support key manufacturers such as Schrack, Apem, Binder, Omron and many more. Please send me an enquiry via liamm@merefields.com or enquires@merefields.com

We have over 10 Million Lines of Components in our Supply. Contact me on liamm@merefields.com

BOSCH TERMINALS AVAILABLE ON OUR STOCK LIST Please send me an enquiry via liamm@merefields.com or enquires@merefields.com 

Produced in our UK factory this qualified oscillator offers a 500G shock rating and good phase noise

Miniature cylindrical crystal with AT-CUT strip crystal priding low mass with small size. Frequency range 3.579MHz to 70MHz. Frequency range 3.579MHz to 70.0MHz Fundamental mode to 30MHz Low mass, miniature cylindrical package

The ultra-miniature 32.768kHz CXOXULP oscillators use an AT-Cut crystal for tight stability and also have a low current consumption, typically 15µA. A fast start-up time (15ms) and tight frequency stability (±30ppm to ±100ppm) over a wide temperature range. This is a Statek product manufactured by Statek Inc, America. Contact Euroquartz Sales or Technical for details. Ultra-low current consumption (typically 15µA) Fast start-up (typically 15ms) Tight Tolerance High Shock Resistance Low Ageing Full military testing available

CXOQ oscillators are ultra-miniature, surface mount units packaged in a 2.50 x 2.00 x 0.89mm package. The oscillators are capable of withstanding high shock environments. The design and build standard including availability of full 'MIL' testing ensures great reliability. This is a Statek product manufactured by Statek Inc, America. Contact Euroquartz Sales or Technical for details. High shock survivability High frequency stability Low acceleration sensitivity (HG version) CMOS and TTL compatible Low power consumption Full military testing per MIL PRF 55310 available Optional enable/disable Low EMI emission Hermetically sealed ceramic package

CXOMK oscillators are miniature, surface mount units packaged in a 6.5 x 5.0 x 1.5mm package. Ultilizing the latest advancements in production technology, the CXOMK oscillator is capable of achieving close tolerance frequency calibration and high stability over a wide temperature range. High shock resistance. The part is available with full 'MIL' testing if required. This is a Statek product designed and manufactured by Statek Inc, USA. Contact Euroquartz Sales or Technical for details. CMOS/TTL Compatible High shock resistance Optional Enable/Disable with Tri-State Low EMI emission Full military testing available Hermetically sealed package

CXOL oscillators are ultra-miniature (32. x 1.5mm), ultra-low current quartz crystal oscillators with a typical start-up time of 200ms. Hermetically sealed in a highy reliable ceramic housing, these oscdillators are available over a wide range of input voltages (1.2V ~ 5.0V). This is a Statek product manufactured by Statek Inc, America. Contact Euroquartz Sales or Technical for details. Ultra-low current consiumption Typical start-up time of 200ms Typical Rise/Fall times of 25ns Hermetically sealed ceramic package Optional output enable/disable with Tri-state Full military testing per MIL PRF 55310 available Supply 1.2 to 5.0V Enable/Disable included

CX9VSM crystals are leadless devices designed for surface mounting on PCBs or hybrid substrates. The crystals have a very low-profile (<0.94mm) and are suited for all low frequency applications. This is a Statek product designed and manufactured by Statek Inc, USA. Contact Euroquartz Sales or Technical for details. Frequency Range 32kHz to 160kHz High shock resistance Ultra-small ceramic package Low ageing Designed for low power applications Full MIL testing available

CX9HT crystals are designed for applications requiring very small footprint and low profile (<1.0mm). Using micro-machining processes this hermetcally-sealed crystal ensures high stability and low ageing. This is a Statek product designed and manufactured by Statek Inc, USA. Contact Euroquartz Sales or Technical for details. Designed for infrared, vapour phase or epoxy mounting Low profile, (<1.0mm) hermetically sealed ceramic package Excellent ageing characteristics High shock and vibration resistance Full military testing available Available with glass or ceramic lid Custom designs available

CX18SM crystals are designed for applications where miniaturization is paramount. The rugged crystal is ideally suited for a wide variety of high frequency applications including medical electronics, cardiac rhythm management, pacemakers for example. Also auitable for cochlear implants, infusion pumps and wildlife tracking. This is a Statek product designed and manufactured by Statek Inc, USA. Contact Euroquartz Sales or Technical for details. Ultra-miniature SMD package 1.55 x 0.95 x 0.35mm Frequency Range 30MHz ~ 100MHz High shock and vibration resistance Hermetically sealed Available with glass or ceramic lid Tight calibration tolerance Custom designs available

CX11SM crystals are designed for applications requiring very small footprint and low profile (<1.0mm). Using micro-machining processes this hermetically-sealed crystal ensures high stability and low ageing. This is a Statek product designed and manufactured by Statek Inc, USA. Contact Euroquartz Sales or Technical for details. Designed for infrared, vapour phase or epoxy mounting Low profile, (<1.0mm) hermetically sealed ceramic package Excellent ageing characteristics High shock and vibration resistance Full military testing available Available with glass or ceramic lid Custom designs available

CX11SM crystals are leadless devices designed for surface mounting on PCBs or hybrid substrates. The crystals have very small outline and low-profile and are suited for all low frequency applications. This is a Statek product designed and manufactured by Statek Inc, USA. Contact Euroquartz Sales or Technical for details Frequency Range 32.768kHz and 100kHz to 180kHz High shock resistance Ultra-small ceramic package Low ageing Designed for low power applications Full MIL testing available

CX11LHG crystals are high performance devices designed to survive extreme shock and high vibration environments. Low acceleration sensitivity and low ageing performance are coupled with tight calibration and temperature tolerances. This is a Statek product designed and manufactured by Statek Inc, USA. Contact Euroquartz Sales or Technical for details CH11LHG crystals are designed for extreme environments. This crystal is ideal for use where extreme mechanical shock occurs.

A surface-mount crystal with the same base outline as HC49. A low-cost part ideal for volume applications. Different height parts are available: 49USMXL height = 3.2mm max and 49USMX height = 4.2mm max Frequency Range: 3.2MHz to 70.0MHz Low cost crystal for mass market applications Surface mount version of HC49-4H crystal Comprehensie stockholding of standard frequencies Customized parts readily available Industry-standard package Low-profile versions available

A HC49 crystal with formed leads and clip for SMD application. Available in fundamental and 3rd, 5th 7th and 9th overtones. Close tolerances and specifications available. Low-cost, industry-standard crystal unit formed for SMD Available with close tolerances Frequency range 1.0MHz to 200MHz Specifications fully customisable

Product Features: • 20 Output voltages to choose from (5 - 120VAC R.M.S.). • Six VA size models available from - 1.1 to 36VA. • Both series operate on 50/60 Hz. current. • Low profile, split bobbin design. • Dual winding secondaries, non-concentrically wound. • Units are designed so that all windings must be used. • Low primary to secondary coupling - no electrostatic shield required. • Choice of economical single primary 115V (164 Series) or universal dual primary 115/230V (162 Series) - either model 50/60 Hz. operation. • High insulation - Hipot of 2,500V RMS. • Class B insulation - 130°C. • No mounting hardware required on 1.1 and 2.4 VA sizes, two hole mounting on 6, 12 and 20VA sizes, four hole mounting on 36VA size (mounting screws not provided). P.C. board mount with industry standard pin spacing. • c UL us recognized.

Product Features: • Pin type, miniature size, P.C. board mount, net weight of only 0.1 oz. • Rugged potted construction produces a completely sealed unit withstanding severe environmental conditions. • Secondary may be used as primary and primary as secondary. • Power level: Minimum frequency range: 300 Hz. to 100 Khz. +/- 0.5 db @ 100 mw. • Frequency range @ +10 dbm is 200 Hz. to 100 Khz. +/- 0.5 db • Frequency range @ +15 dbm is 200 Hz. to 100 Khz. +/- 0.5 db • Frequency range @ +20 dbm is 300 Hz. to 100 Khz. +/- 0.5 db • Frequency measurements with no D.C. current saturation 101D

Product Features: • Open core and coil, 4-slot bracket mounting chokes. • Tolerance of 15% on both inductance and resistance. • Inductances measured at rated D.C. current. • The "195" Series is single coil. • The "196" Series is dual coil - allowing more versatility. • Recommended maximum operating voltage 600 VAC (winding to core). • Hipot tested at 2,500 VAC. • Connections are made to a screw terminal or heavy copper tabs with holes. • Perfect for high current power supply filtering.

Product Features: • All models impregnated with a moisture and fungus resistant varnish. • Lead length of 1.5" (+/- 0.13"). • Wound for low distributed capacity by using solenoid (single coil) windings. • Includes vinyl insulation cover. • Ambient temperature range -40°C to +105°C.

Product Features: • Heavy duty design with plastic shell and double wipe contacts. • Indoor use only. • Allows for ground connection between equipment and international power sources. • With a set of all 4 adaptors, they will accept equipment with plugs from virtually every country except South Africa. • Adaptors do not affect voltages, they are a mechanical device only to match foreign "pin-outs" of receptacles and/or plugs.

Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).

Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).

Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).

Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).

Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).

Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).

Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).