Cooling - Import export

The 2500 KW cooling tower is designed to provide high performance for a minimal unit size. The specially designed drift eliminators reduce drift to 0.002% of flow. When supplied with chilled water, the cooling tower can also be used as a bulk air cooler for applications requiring large air flow. Designed and assembled to Aggreko’s standards. Packaged into 20 ft. ISO container frame. Brentwood drift eliminators designed for forced draft. Fully enclosed and protected from direct sunlight. Fan unit driven by a variable speed drive. Controlled operation of condenser unit fans. Safe and reliable operation for rental applications. Ease of transportation, handing and protection. Reduces drift to a rate significantly lower than that required by law. Increases safety with respect to microbial growth. Regulates fan speed proportional to sump temperature. Maximises efficiency, minimises noise and prevents overcondensation when coupled with water-cooled chillers.

Our efficient 500 kW boilers use an advanced dual stage burner, 3-way valve system and smart controls to optimise temperature control and minimise fuel burn and emissions. From a small footprint they deliver maximum heat output, with pressures up to 10 bar and temperatures up to 90ºC. Canopy casing has a small footprint for ease of transportation. Cast iron 3-pass flue boiler allows for excellent combustion, stable temperatures and reduced short-cycling. Dual stage burner accurately matches fluctuating heat requirements and achieves lower emissions at part-load operation. Integrated 3-way valve ensures operating temperature is quickly achieved, maintains tight temperature control and reduces short-cycling. Able to communicate with building management systems and plant equipment. Electronic controls closely regulate and stabilise temperatures and offer advanced fault-finding capabilities. Master/slave configuration delivers load-on-demand

Our latest 250 kW boilers are extremely efficient, using an advanced dual stage burner, 3-way valve system and smart controls to optimise temperature control and minimise fuel burn and emissions. From a small footprint we’ll deliver maximum heat output, with temperatures up to 90ºC and pressures up to 10 bar. Canopy casing has a small footprint for ease of transportation. Cast iron 3-pass flue boiler allows for excellent combustion, stable temperatures and reduced short-cycling. Dual stage burner accurately matches fluctuating heat requirements and achieves lower emissions at part-load operation. Integrated 3-way valve ensures operating temperature is quickly achieved, maintains tight temperature control and reduces short-cycling. Able to communicate with building management systems and plant equipment. Electronic controls closely regulate and stabilise temperatures and offer advanced fault-finding capabilities. Master/slave configuration delivers load-on-demand functionality

Control humidity and help prevent corrosion and spoilage with our commercial 2000 m³/h dehumidifier. This heavy duty dehumidifier unit combines smart appearance with excellent performance. Heavy duty design suitable for a range of rental applications. Variable fan speed ensures the exact air flow for optimum performance. Electronically-controlled regeneration heater maintains the user humidity level for maximum energy savings. Remote humidistat control is available when required. With an air flow rate of between 1700 and 2000 m³/h, this is a heavy duty dehumidifier which is able to cover large areas. Cost-effective way to reduce the effects of moisture damage Do not require background heat for them to work. In-built heater controllers ensure maximum performance all year round and help keep running costs to a minimum. Can be placed inside and outside. Air can be directed into specific areas using flexible ducting. Temperature control accessories are available

Our 1600 m³/h large industrial dehumidifier allows you to control humidity and moisture levels. This heavy duty dehumidifier unit combines smart appearance with excellent performance. Our industrial dehumidifiers are heavy duty for the rental market. Discreet, stainless steel casing. Built-in heater controller ensures maximum efficiency all year round. Remote humidistat control is available when required. Choosing industrial dehumidifier hire means it is a cost-effective way to reduce the effects of moisture damage - one unit can dry out very large areas. Do not require background heat for them to work. In-built heater controllers ensure maximum performance all year round and help keep running costs to a minimum. Our industrial dehumidifiers can be placed inside and outside. Air can be directed into specific areas using flexible ducting. Temperature control accessories are available, including a variety of compatible ducting and remote humidistats

The 100 kW heat pump chiller offers efficient cooling with the added benefit of heating, for the ultimate flexibility from a compact footprint. The 100 kW heat pump chiller uses R410 refrigerant. Portable Frame with both 4 point ISO lift facilities and forklift pockets. Unit base and frame made from heavy-gauge steel. Full CE design compliance. 3 phase and earth electrical connections, no neutral cable required. Environmentally friendly with zero ozone depletion factor. Low sound levels for sensitive environments. Energy efficient compressor units for low running costs. Easy to read and adjust control panel. Condenser fan guards provide protection against accidental site damage. ‘Night Noise Set Back’ with high efficiency or low noise options. The 100 kW heat pump chiller provides both heating and cooling, reducing footprint required for both applications. Ideal if a project has electrical power available and use of open-fire systems is not possible.

For both planned projects and emergencies, our chiller hire services will meet your needs. Our expert team will design, commission and maintain your 100 kW chillers - keeping you up and running for as long as you need. Uses R407c refrigerant for reliability and optimum efficiency. Portable frame with both 4 point ISO lift facilities and forklift pockets. Unit base and frame made from heavy-gauge steel. Full CE design compliance. 3 phase and earth electrical connections, no neutral cable required. Environmentally friendly with zero ozone depletion factor. Low sound attenuation for sound-sensitive environments. Energy efficient compressor units for low running costs. Easy to read and adjust control panel. Condenser fan guards provide protection against accidental site damage. Can be used on a variety of installations, such as process cooling and air conditioning applications. Fast installation and commissioning. Environmentally-friendly.

One of the smallest air-cooled units in the Aggreko fleet, our 50 kW chiller hire service offers efficient cooling for a wide range of HVAC and process cooling applications. Portable frame with both 4 point ISO lift facilities and forklift pockets. Unit base and frame made from heavy-gauge steel. Full CE design compliance. 3 phase and earth electrical connections, no neutral cable required. Environmentally friendly with zero ozone depletion factor. Low sound attenuation for sound- sensitive environments. Energy efficient compressor units for low running costs. Easy to read, adjustable control panel. Condenser fan guards for protection against accidental site damage. Can be used on a variety of installations, such as process cooling and air conditioning applications. Fast installation and commissioning. Environmentally-friendly. Low noise for use on projects where noise needs to be kept to a minumum. Adaptive controls ensure the unit maintains very stable temperatures

Loadbank hire - the kit and the know-how It’s vital to test your systems so you know they’re up to the job – whether you’re commissioning new generators or cooling systems, or need to carry out routine maintenance. Loadbanks are used to test electrical power and cooling equipment. They simulate variable electrical load conditions in a way that can be accurately controlled, measured and recorded. As each test is different, we offer a range of loadbank rentals and supporting equipment that we match to your needs. Here are the generators that are available in our loadbank hire packages: AC loadbanks from 100 kW ‘resistive only’ to 6000 kVA combined ‘resistive and reactive’ in single or multiple units DC loadbanks capable of accepting voltages up to 500 V Multi-tap transformers fitted with high voltage switchgear and protection as standard We’ve designed our controls to make loadbank testing simple. You can do it remotely using a simple hand-held device

Our 7000 m³/h desiccant dehumidifiers will help to control moisture and humidity levels. Our large scale dehumidifiers are ideal for commercial, industrial and construction site projects. Heavy duty for rental market. Discreet, stainless steel casing. Built-in heater controller ensures maximum efficiency all year round. Remote humidistat control is available when required. With an air flow rate of 7000 m³/h, this large scale dehumidifier can cover larger areas that need to be dried out, efficiently. Cost-effective way to reduce the effects of moisture damage. Do not require background heat for them to work. In-built heater controllers ensure maximum performance all year round and help keep running costs to a minimum. Large scale dehumidifier that can be placed inside and outside. Air can be directed into specific areas using flexible ducting. Temperature control accessories are available

We have all types of industrial heat exchangers, including: plate and frame shell and plate shell and tube fin/fan They’re refinery-grade, thoroughly cleaned, pressure tested and certified contaminant-free before each use. Capable of handling temperatures from -50ºC to +300ºC, they can also accept volatile gases and liquids, high pressures (up to 40 barg), hydrocarbons, sea water, effluent and brine. With a wide range of supporting ancillaries we can connect our heat exchanger units into any system design with minimum disruption. Heat exchanger hire with expert service support – every time Whether you’re facing emergency bottlenecks, turnarounds or seasonal cooling needs, our process engineers will work closely with you to find the best solution. They’ll visit your site, assess your needs, then design and size your project using their experience, simulation software and stream physical properties. We can also assess the performance of existing heat exchanger

Air handler hire to match your needs Our air handling unit system are specifically designed to work with our fluid chillers and boilers to provide cool or warm air for a variety of applications. With a wide range of sizes available, from 50 to 500 kW, we can design and install air handling unit systems to fit any need – whatever your request. Our experienced team offer industrial air handler hire when you need it. We have the know-how to calculate the most complex cooling requirements, giving you a cooling package that will deliver energy and cost efficiencies. Industrial air handling units fitted for you, by our engineers Choosing air handler hire with us means that if you need to circulate air through your existing heating, ventilation and air conditioning (HVAC) systems, we can match our air handlers to your set-up. We’ll also provide all the air handling equipment needed, such as ducting, hoses and cabling as part of our air handler hire service

Our 1500 kW water-cooled chiller is the largest in the Aggreko fleet and can be used on a variety of installations, such as process cooling and air conditioning applications. Whether you have a planned project, or an emergency, we'll find the right solution for your cooling requirements. Portable frame with both 4 point ISO lift facilities and forklift pockets for easy handling. Wide operating range to suit most requirements and fluid off temperatures down to -6°C. Full CE design compliance. Low noise levels. Energy efficient compressor units for low running costs. Easy to read and adjust control panel including inlet and outlet temperatures, system pressure, set point parameters. Adaptive controls maintain very stable temperatures under all system conditions. 3 phase and earth electrical connections, no neutral cable required. Quick and easy to install. Can be used with site condenser water or supplied with stand alone cooling tower. Environmentally friendly.

Gross Weight: 0.18kg Material: Polyester Pattern: Solid Color Sleeve Length: Long Sleeves Length: Bodysuit

Top quality dental care products available whole sale and retail.

Full range of automotive and components range from TE Connectivity, DEUTSCH, Sumitomo, Bosch, Lear, EAO, Valeo and XB Components. Connectors, Terminals, Electric Vehicle, Relays, Clutch Kits, Cooling and Air Management, Switch Systems, Rotating Electrics, Wiper Systems, Pushbuttons and Accessories

Not everything ‘off the shelf’ will be a fit for your specific application. Like most things in life, one size doesn’t fit all and BVM take the same approach when looking at an overall system design – particularly where the enclosure is concerned. BVM’s design team utilise the very latest in 3D modelling CAD software so we can design suitable housings to provide the exact fit, feel and practicalities needed to house & accommodate the central intelligence and interactivity behind your product – inclusive of motherboards, TFT displays with integrated touch, required cabling – and any other peripheral devices needed to aid your application.

Manufacturing processes can often result in a large build-up of heat, sometimes in excess of what is practical for workers to efficiently or safely work in. Because of this, industrial HVACs are essential systems for industries of all sizes and services. integratedAIR Systems has installed industrial HVAC systems for clients in various industries, implementing high-standard bespoke units with dedicated customer service and specialist knowledge; proving time and time again that we are the provider of choice.

Cooling Tower. Evaporative condenser build in FRP

Air cooled chillers

B & V Chemicals have a full range of cooling water system treatment chemicals. This range also contains many specialist products formulated for use in specific specialist situations or for use in response to problematic situations. Our range includes: scale and Corrosion Inhibitors, oxidising and non-oxidising biocides, bio dispersants, antifoams, foaming pack cleaners and on-line descalers.

PSL manufacture every type and size of heat sink - including standard extrusion, bonded-fin and liquid cooling plate. We can incorporate fans and embedded pipes, and we provide a full stack assembly service using any type of semiconductor device. Full 3D CAD drawings, thermal simulation graphics, pressure testing, technical advice and consultancy. Prototypes available, volume quantities provided by fixed schedules.

District heating systems include a centralised energy centre which then distributes the heat through a network of insulated pipes to the buildings which are connected to the network. The network of pipework consists of a flow and return loop which passes each building. Colloide uses local substations in each building to control the flow of water from the district heating pipework loop through each substation and this flow is used to generate heat in the local building. The central energy centres are generally designed to have more than one energy source, which allows the plant operator to select the most cost efficient and sustainable way of providing the energy needed with the energy sources being brought on and off line to meet demand. We design and build the district heating and cooling networks to include the pumps, pipework, thermal stores, instrumentation, control systems, local substations, heat exchangers and communication through a central control system.

Supplying both work and leisure boats with heating and cooling solutions, Stream Marine uses Clion Marine as a primary manufacturer because of their capabilities and high success rate. Clion Marine are a Dutch climate control specialist with a well-established brand in the Netherlands. They have been developing and producing a range of climate control solutions for over 25 years. The full Clion range consists of Chillers, Self-Contained Units, Fancoils, custom made models and engine driven kits. The Clion products are specifically designed to be practical, reliable and efficient. All Clion systems are tested under extreme conditions to ensure that they are ready to withstand use in any extreme conditions they might face. Clion's full range consists of high quality, reliable and effective products that are built to last. Whether it be a leisure or commercial vessel, we are able to offer the right Clion product capable of providing you with a comfortable and controllable environment.

Offering a wide range of liquid cooling systems, power electronic building blocks, trackside converters, converters for coaches, locomotives, trains and trams.

A tool to provide fast and effective cleaning and lubricating of wire ropes. Wire ropes from 6mm to 165mm in diameter can be greased at speeds up to 2,000 meters per hour. High strength cast aluminium collars are lightweight and along with carry handles ensure that the Viper WRL is easy for you to install as well as operate. Ideal for the cleaning & lubrication of wire ropes for Ship to Shore Cranes, Bulk Carrier Vessel Cranes, mining applications as well as mobile & tower cranes in the construction sector. A&S International has more than 15 active distributors around the world who stock Viper Wire Rope Lubricators.

Our Body and Mind Botanicals Organic Cold Pressed Hemp Seed Oil is a fantastic alternative to Olive oil, great in salads or baking. It provides a high amount of Vitamin E, Omega 3 & 6, Antioxidants and Chlorophyll.