High pressure - Import export

The TactileMat is a rigid and robust pressure sensing pad that is of the largest, high-resolution pressure mapping sensors on the market. The use of a large area sensor like the TactileMat allows you to capture dynamic pressure over a larger area without the dead zones typically associated with trying to use multiple smaller sensors side-by-side. This is one of the largest pressure mats on the market. Key Features Large pressure mapping surface area (220 mm x 450 mm) Rigid, robust, and can be built in various full scale ranges (FSR) up to 188 psi FSR Waterproof IP53+ (Can be special ordered to higher water-proofing upon request) Slim construction (7.69 mm) with a non-slip base Array Size = 44 x 90, element size = 5 mm x 5 mm

High Pressure Control Valve is designed and developed for applications where the high pressure / drop liquid and high pressure / temperature gas/vapour to be handled. Our specially designed Velocity Control Trim, which is a multi turn / multistage velocity control trim, handles these severe/critical applications very effectively – eliminating cavitation & vibration, and reducing the noise to the acceptable levels.

The needs of the power generation industry include year in and year out reliability, optimum performance for maximum efficiency, and absolute on time delivery to meet plant outage schedules. All of the Jet Flow Boiler Feed Water Heaters are designed in accordance with HEI standards, TEMA and ASME codes. Jet Flow uses state of the art computer programs to perform the thermal hydraulic and mechanical design of each Feed Water Heater we fabricate. Jet Flow designs and manufactures both Low Pressure (LP) and High Pressure (HP) feed water heaters which may be installed either vertically or horizontally, depending on the plant design requirements. Each Jet Flow Feed Water Heater will contain from one to three separate heat transfer areas of zones including the Condensing, Desuperheating and Subcooling zones. Our heaters can be provided with multiple zones within the shell side Condensing Zone Included in all heaters,steam is condensed in this zone and non condensable gases are removed.

Interchange Data: • High Pressure Screw-Together Interchange • Parker/Pioneer 3000-Series, Enerpac C604, Stucchi IVHP • Hansen WS56000, Snap-Tite 76-Series, DNP PVM Materials: • Machined components are manufactured using solid Steel or 316 Stainless Steel bar stock • Chrome Steel ball valve is mechanically seated to improve low pressure sealing performance • Steel nipples are machined from solid high strength Steel bar stock • Steel componentry is plated using ROHS Compliant Trivalent Chrome Seal Components: • Urethane seal is standard in ball valve couplers and provides resistance to extrusion when subjected to high pressure - temperature range -40°C to +82°C (-40°F to +180°F) • Nitrile seals are standard in poppet valve couplings, providing a temperature range of -40°C to +121°C (-40°F to +250°F)

High pressure safety hose ø 13mm, burst pressure 1,650 bar (double steel wire braided

Multiple braid, h.p. nylon hose diameter 9mm. Burst pressure 1,000 bar (14,450 psi), hex. end fittings for safe connection to grease gun. Thread 1/8” BSPT

Synthetic special pastes for the lubrication of roller and journal bearings in extreme application conditions. These pastes with refined EP-additives are extremely pressure-resistant and create a protective lubricating film which is resistant against water.

Side Lever Oil Gun, High Pressure 500cc Capacity, Screw Type Air Release Valve. Short Stroke delivery, special piston for use with oil. Rigid Tube 6" (150mm) and 4 jaw Precision Hydraulic Connector with Non-Return Valve Colour: Silver

Push Type Grease Guns (High Pressure) High pressure push type grease guns supplied with Universal and Conical connectors, with red protection cap.

Special Push Type Gun for oil, petroleum, aerosols and oil containing additives, black powder coated with rigid tube, universal and conical connector. Yellow protection cap. Pressure Capability - 150Bar (2200psi) Output: 0.5 cc's per stroke.

Bourdon Tube Pressure Gauge - Defence Standard Designed for Naval and Marine applications in accordance with Def Stan 66-2. This gauge has been designed to withstand high level of shock and are all manufactured in accordance with EN837 -1. The 4" and 6" flush mounting versions are available with 3 Hole front fixing flange . Bourdon Tube Oxygen Pressure Gauge The 950GP incorporates a solid baffle wall and blow-out back for operator protection and standard features such as IP67 environmental protection, not normally available on comparative units. The 950GP is specifically manufactured for use on OXYGEN and as such is cleaned for Oxygen service with no oil or grease contamination. A restrictor in the inlet is a standard feature. BFMIRA Vacuum Gauge (Can Piercing Test) The Model 269 is a high specification vacuum gauge specifically designed for the estimation of the intensity of vacuum in a food can. Developed by the British Food Manufacturing Industries Research Association.

The Emulsiflex range of high pressure homogenisers from Avestin are ideal for a wide range of applications, commonly use d within the pharmaceutical, biotechnology and fine chemicals industries. These include cell lysis, particle size reduction, nanoparticles, emulsions (emulsification), and liposome preparation. Additionally, it offers reliable, consistent processing at adjustable pressures of up to 45,000 psi, Both air-powered and electrically-powered systems are available, and options include filter/extruder attachments, temperature control mechanisms and automatic pressure control. The unique Emulsiflex design ensures that there are no ‘O’-rings or gaskets in the entire path of the product. This means less risk of contamination, easier cleaning and no leakage.

The BioAim™ DMS 2004 is a portable hand held fogging system which allows the user to spray our biocide direct at specific areas or items. For example, it is extremely useful in kindergartens or clinical settings, where you may wish to target extra effort to decontaminate equipment or areas of intense use. The flexible hose enables the user to reach difficult areas and ensure that high risk surfaces are thoroughly treated.

Our pressure washing services offer a comprehensive solution for cleaning and rejuvenating a wide range of surfaces, including driveways, patios, decks, sidewalks, and building exteriors. Using high-powered, eco-friendly equipment, we effectively remove dirt, grime, mildew, and other stubborn stains, restoring the original beauty and cleanliness of your outdoor spaces. Contact us today to schedule your pressure washing appointment and experience the difference a thorough, professional clean can make.