Plating - Import export

GRP Anti-Slip Plate is a lightweight, non-corrosive product and can withstand extreme weather conditions, making it ideal for a range of environments. The plate is available with a fine or medium gritted top, depending on the application. The gritted plate provides an effective anti-slip surface and can be used to create a safe walkway in hazardous environments. It is commonly used in many applications, such as: walkways, stair treads, landing areas, ramps, piers, pontoons and many more. It can also be used to create a solid/closed top surface on the top of existing open mesh grating. Made from Isophthalic Polyester, with phenolic options available. Standard Colours: Yellow, Grey, Black (other colours available upon request) Plate Thickness: 2.5mm – 20mm available. Standard size of 4mm thick.

Precision grade plate beam splitters offer higher flatness and parallel specifications particularly useful in laser and imaging applications. Both faces of these precision beamsplitters are polished to a high degree of flatness of λ/4 and have excellent surface quality. Precision splitters are made from high quality optically polished BK7 with both surfaces controlled to a high degree of parallelism. Our stock ranges of precision beamsplitters are available for use in Visible, Near Infrared and Telecoms wavelengths with 50/50 split ratio. The beamsplitter coating is a high quality dielectric coating, the non-splitting face of the beamsplitter is multilayer antireflective coated to eliminate second face ghosting effects. For more information read the PDF

For use with System 75 Double Tube Mast Systems. Secure and hinged base plate. Hinged base plate for the System 75 Double Tube Mast. This optional accessory makes deployment even easier by providing a secure, hinged base for the mast body. System 75 double tube mast systems

hemical Composition: Total concentration of all impurities ≤ 65ppm (typical value ≤ 25ppm). Copper obtained by the difference between 100% and total impurities. ELEMENT SPECIFIED TYPICAL Se < 1.0 ppm < 1.0 ppm Te < 1.0 ppm < 0.5 ppm Bi < 0.5 ppm 0.20 ppm Sb < 1.0 ppm < 1.0 ppm As < 3.0 ppm 1.2 ppm Pb < 1.0 ppm 0.3 ppm Fe < 5.0 ppm 2.8 ppm S < 10.0 ppm 4.5 ppm Ni < 5.0 ppm < 1.0 ppm Sn < 1.0 ppm < 0.5 ppm Ag < 12.0 ppm 8.0 ppm

ASM model is made of cast iron construction. ASM machines are combining the user friendly features, quality and best prices as an economical model. ASM - 3 Rolls Asymetical Plate Roll Machine Standard Details Body is made of cast iron construction Central rollers powered with electric motor, gearbox and gear drive Cone bending device Self brake main motor Upper roll is opanable by side Lower roll and back roll are with hand wheels up & down adjustable. Separate eletric control panel with foot pedal Suitable for CE, ISO 9001-2008, TSEK and TURQUM certificates ASM - 3 Rolls Asymetical Plate Roll Machine Optional Features Induction hardened rolls. Back roll with motor. Digital display.

The Metlsaw NF range of plate saws are the premier saw for precision sawing of non-ferrous plate from 6mm – 300mm thick. Fully automatic sawing system Up to 12" thickness capacity 50 HP Arbor Motor Positioning (cut to length) tolerance to +/- 0.075mm Surface Finishes to 8 Micro-inch High speed close tolerance cutting Can eliminate/reduce secondary machining of parts Fast set up and part number memory Rapid sawing speeds Full size touchscreen operator interface PLC Controls by Rockwell Automation (AB) Easy Blade Change Available widths of 1.8M – 6M as standard

Taper Ground for Minimal Runout Custom Adaptors are Available Available to suit range of spindle noses To Suit A2 Spindle NosesStandard spindle adaptors to suit power chucks with a 220mm recess. Range of adaptors to suit different spindles heads. High accuracy taper and outer diameter.

Taper Ground for Minimal Runout Custom Adaptors are Available Available to suit range of spindle noses To Suit A2 Spindle NosesStandard spindle adaptors to suit power chucks with a 380mm recess. Range of adaptors to suit different spindles heads. High accuracy taper and outer diameter.

Taper Ground for Minimal Runout Custom Adaptors are Available Available to suit range of spindle noses To Suit A2 Spindle NosesStandard spindle adaptors to suit power chucks with a 380mm recess. Range of adaptors to suit different spindles heads. High accuracy taper and outer diameter.

Taper Ground for Minimal Runout Custom Adaptors are Available Available to suit range of spindle noses To Suit A2 Spindle NosesStandard spindle adaptors to suit power chucks with a 170mm recess. Range of adaptors to suit different spindles heads. High accuracy taper and outer diameter.

Taper Ground for Minimal Runout Custom Adaptors are Available Available to suit range of spindle noses To Suit A2 Spindle Noses Standard spindle adaptors to suit power chucks with a 140mm recess. Range of adaptors to suit different spindles heads. High accuracy taper and outer diameter.

Centre Cover protects from Swarf Entering Inside the Chuck Replacement dust cover to suit a B200 power chuck. The cover plate is used to protect the internal parts of the chuck from swarf ingress.

Compatible with large, readily available, range of jaws Allows for holding of larger components Upto 20% more speed and grip force than conventional chuck Standard Accessories AvailableKitagawa chucks are manufactured from high grade alloy steel. Three jaw wedge style power chucks deliver up to 20% more speed, gripping force and bore size when compared to conventional chucks. These larger style chucks provide the higher grip forces required for doing large work. B-A series chucks are supplied with a blank drawnut as standard with a set of T-nuts and adaptor plate.

The Worlds Most Popular Chuck Compatible with large, readily available, range of jaws Upto 20% more speed and grip force than conventional chuck Standard Accessories AvailableKitagawa's chucks are manufactured from high grade alloy steel. Three jaw wedge style power chucks deliver up to 20% more speed, gripping force and bore size when compared to conventional chucks. These chucks are supplied with a spindle nose adaptor plate. B200A series chucks are supplied with a blank drawnut as standard with a set of T-nuts and an adaptor plate.

Universal quick change system for any chuck Repeatability < 0.001" TIR Reduce setup and changeover times by up to 80% Eliminate out of round conditions and concentricity problems DESCRIPTION When it comes to turning/holding smaller diameter parts Abbott’s precision master plate and segment system is an ideal choice for high changeover and short running jobs. Due to the system’s high repeatability, it is an excellent alternative to more expensive quick change chucks. The system consists of an aluminum master plate, similar to a thin Pie Jaw®, which is bored and bushed to accommodate Abbott’s standard, off-the-shelf pinned segments. Plates are available in 8, 10 and 12 inch diameters and can be mounted on 4-12 inch diameter chucks. The master plate can be custom machined to fit any model chuck, making it a permanent universal fixture on any machine.When using this system, the transition from one job to the next simply requires bolting on a new size or configuration of segments

Universal quick change system for any chuck Repeatability < 0.001" TIR Reduce setup and changeover times by up to 80% Eliminate out of round conditions and concentricity problems DESCRIPTION When it comes to turning/holding smaller diameter parts Abbott’s precision master plate and segment system is an ideal choice for high changeover and short running jobs. Due to the system’s high repeatability, it is an excellent alternative to more expensive quick change chucks. The system consists of an aluminum master plate, similar to a thin Pie Jaw®, which is bored and bushed to accommodate Abbott’s standard, off-the-shelf pinned segments. Plates are available in 8, 10 and 12 inch diameters and can be mounted on 4-12 inch diameter chucks. The master plate can be custom machined to fit any model chuck, making it a permanent universal fixture on any machine.When using this system, the transition from one job to the next simply requires bolting on a new size

Reduce setup and changeover times by up to 80% Eliminate out of round conditions and concentricity problems Effectively double the holding capacity of any chuck without eliminating the ability to hold small parts Light-weight 6061 T-6 or 319 for weight saving DESCRIPTION Abbott‘s master plate and segment system is a great choice for turning larger diameter work pieces. The system consists of an aluminum master plate, similar to a thin Pie Jaw®, which is pre-drilled and keyed to accommodate Abbott’s standard, off-the-shelf segment rings. Plates are available in various diameters from 15 to 60 inches and can be mounted on 8-60 inch diameter chucks, effectively increasing the holding capability of smaller chucks. The master plate can be custom machined to fit any model chuck, making it a permanent universal fixture on any machine.When using this system, the transition from one job to the next simply requires bolting on a new size or configuration of segments before continuing

Machinable to accept required hole pattern Ground Flat Five High Accuracy Location Holes Cast Iron Sub Plate to suit rotary table or indexer. Plain to allow for machining of hole patterns and features required for special jigs or fixtures. Ground flat with Locating Holes for precise loading and quick set-up.

Uses the HSK-A type, time-proven tool holder shank to connect the head and the work-piece holder. Off-line setup in advance allows quick work-piece changing, minimizing machine downtime. Accepts a variety of workholders Excellent workpiece accessibility In the case where you can’t mount the head directly to your machine table, please use this mounting plate. We can supply a blank that is customisable and also manufacture a special mounting plate just for you. For more information, please feel free to contact us.

T-Slots to allow for Flexible use for Fixturing Products Ground Flat Five High Accuracy Location Holes Cast Iron Sub Plate to suit rotary table or indexer. T-Slot pattern to allow for easy flexible set-up of fixturing components. Ground flat with Locating Holes for precise loading and quick location.

Sturdy Cast Iron Design Ground Flat and Parallel Modular quick change subplate to suit the BP13 modular cube. This plate is gridded to accept standard fixturing parts./

Allignment Busing and Thread Hole for Quick Accurate Set-ups Ground Flat Five High Accuracy Location Holes Cast Iron Sub Plate to suit rotary table or indexer. Grid pattern with allignment bushes and threaded inserts for ease of set-up. Ground flat with Locating Holes for precise loading and quick location.

Allignment Busing and Thread Hole for Quick Accurate Set-ups Ground Flat and Parallel Cast iron gridded angle plate .Grid pattern with allignment bushes and threaded inserts for ease of set-up. Ground flat parallel and perpendicular for accuracy. To suit verticle or horizontal machining centre applications.

Machinable to accept required hole pattern Ground Flat and Parallel Locating Holes for easy Set-Up Cast iron plain fixture plate with mounting holes. Plain to allow for the machining of hole patterns and features required for specific fixtures. Ground flat parallel and perpendicular for accuracy. Two dowel holes allow for precise loading and setting up of the fixture plate.

Machinable to accept required hole pattern Ground Flat and Parallel Locating Holes for easy Set-Up Cast iron plain fixture plate with mounting holes. Plain to allow for the machining of hole patterns and features required for specific fixtures. Ground flat parallel and perpendicular for accuracy. Two dowel holes allow for precise loading and setting up of the fixture plate.

Allignment Busing and Thread Hole for Quick Accurate Set-ups Ground Flat and Parallel Locating Holes for easy Location Cast iron fixture plate with mounting holes. Grid pattern with allignment bushes and threaded inserts for ease of set-up. Ground flat parallel and perpendicular for accuracy. Two dowel holes allow for precise loading and setting up of the fixture plate.

Taper Ground for Minimal Runout Custom Adaptors are Available Available to suit range of spindle noses To Suit A2 Spindle NosesStandard spindle adaptors to suit power chucks with a 300mm recess. Range of adaptors to suit different spindles heads. High accuracy taper and outer diameter.

Reduce setup and changeover times by up to 80% Eliminate out of round conditions and concentricity problems Effectively double the holding capacity of any chuck without eliminating the ability to hold small parts Light-weight 713 Tenzaloy for weight saving DESCRIPTION Abbott‘s master plate and segment system is a great choice for turning larger diameter work pieces. The system consists of an aluminum master plate, similar to a thin Pie Jaw®, which is pre-drilled and keyed to accommodate Abbott’s standard, off-the-shelf segment rings. Plates are available in various diameters from 15 to 60 inches and can be mounted on 8-60 inch diameter chucks, effectively increasing the holding capability of smaller chucks. The master plate can be custom machined to fit any model chuck, making it a permanent universal fixture on any machine.When using this system, the transition from one job to the next simply requires bolting on a new size or configuration of segments

Binzhenghong hotplate is a digestion or acid drive equipment commonly used in elemental analysis laboratories. It is made of aluminum alloy or graphite, which heats up quickly and uniformly. Teflon PFA coating on the surface for effective corrosion protection. Its advantage is humanized customization(Its size can be customized according to the requirements of laboratory decoration). Exquisite details:The power cord is sheathed with PFA sleeves and no exposed metal parts, which minimizes interference to the experiment and has a longer service life. It has 4 strengths:  1. heating speed, full uniform heating  2.high efficiency,can heat several samples at the same time  3.simple operation, easy to use. Long service life  4. can customized different holds according to different utensils