Protective tubing - Import export

Precision Ceramics has introduced a new and exciting range of advanced ceramic tubes and insulators ideally suitable for thermocouple protection in high temperature measurement applications. The alumina-based tubes are used throughout many industries to aid monitoring the stability and performance of production processes especially those within hostile and aggressive chemical environments at temperatures up to 1,700°C. They are manufactured to DIN V ENV 12212 and are very strong, organically inert and well proven in a wide field of applications.

Accu-Greaser 18 V Standard-LS Battery operated grease-gun 18V Li-Ion, suitable for 400 g pull-off cartridge, according to DIN 1284, item features: - LCD battery level display and LED overload indicator - Li-Ion battery 18V - 1500mAh - standard wide range input charger (100 -240 V/ 50-60 Hz), - overload protected (charging time approx. 60 min.) - max. delivery 115 ccm per min. - grease barrel for 400 g pull-off cartridges or 500 ccm bulk grease - filling-/ and air venting nipple - high-pressure safety rubber-hose (1.650 bar b.p.), length 750 mm, - incl. 4-jaw precision hydraulic connector - carry-along case with space for spare battery and spare cartridge - UK 3 pin plug supplied suitable for 400 g cartridge, Version comes with cartridge protection tube for 400 g cartridge and plug to replace filling-/ air venting nipple (vacuum principle) Part No. 34 277 02

Accu-Greaser 18 V Standard-S-LS Battery operated grease-gun 18V Li-Ion, suitable for 400 g pull-off cartridge, according to DIN 1284, item features: - LCD battery level display and LED overload indicator - Li-Ion battery 18V - 1500mAh - standard wide range input charger (100 -240 V/ 50-60 Hz), - overload protected (charging time approx. 60 min.) - max. delivery 115 ccm per min. - grease barrel for 400 g pull-off cartridges or 500 ccm bulk grease - filling-/ and air venting nipple - high-pressure safety rubber-hose (1.650 bar b.p.), length 750 mm, - incl. 4-jaw precision hydraulic connector - carry-along case with space for spare battery and spare cartridge - UK 3 pin plug supplied Version comes with grease barrel for 400 g pull-off cartridge AND cartridge protection tube for 400 g cartridge The filling and venting nipple must be replaced by the plug when using screw-top cartridges to make the vacuum principle work ! Part No. 34 279 00

Product Features: • The Class C series of over-voltage surge protective devices has been developed to protect against the effects of indirect lightning discharges and induced voltages and is intended to provide protection in zones 1 2 per IEC 62305. • Category IEC / EN / VDE: Class II / Type 2 / C. Available with and without remote signaling contacts. • DVSC27545 consists of a high performance varistor block with thermal disconnection device. The plug-in module/base design facilitates replacement of a failed module in situ without the need to remove system wiring. • DVSC275452TNS Series combines two 45kA varistor modules to provide protection for single phase TNS networks. • DVSC275452TT Series combines a 45kA varistor and gas discharge tube to provide protection for TT single phase networks, where N to PE galvanic isolation is required.