Voltage detectors - Import export

• Contactless voltage tester with flashlight • For AC • With voltage field sensor for non-contact detection of alternating currents with visual indicator (red LED), voltage range 90 - 1000 V, e.g. in cable connections, wall sockets, junction boxes, circuit breakers & fuses and many more • Integrated flashlight for measuring point illumination • Pushbutton for switching on, with self-test and visual "ready" lamp (white LED) • Device complies with the EN61010-1 standard • Measurement category CAT III / 300V • Compatible with all pliers & cutters with SoftGripp handles • With eyelet for securing to e.g. lanyard • Housing made of made of plastic • Batteries included • Read operating instructions before commissioning

Test Method Hold the TensION at a distance from the ionising points / emitters. If a high voltage is present, a red indicator in the plastic tip will illuminate. To get an indication of proper functioning of the Simco-Ion equipment all the emitters should be checked. Minimum distance from the TensION to the ionising emitters or charging points must be obtained. Refer to the table below: Test Method Hold the TensION at a distance from the ionising points / emitters. If a high voltage is present, a red indicator in the plastic tip will illuminate. To get an indication of proper functioning of the Simco-Ion equipment all the emitters should be checked. Minimum distance from the TensION to the ionising emitters or charging points must be obtained. Refer to the table below: Features - Convenient high-voltage indicator in pen size - There is no need to make contact with the device being controlled - The tip of the TensION illuminates when a voltage is detected

The A240P-5K voltage detector is a voltage sensor based on a capacitive divider principle. Inside the product there is a high stable capacitor, with a high capacitance and up to 15nF and up to 24kV insulation level. The product is dedicated for gas insulated switchgears and is used for asymmetric T-connectors from a range of different manufacturers.

The A240S-5K voltage detector is a voltage sensor based on a capacitive divider principle. Inside the product there is a high stable capacitor, with a high capacitance and up to 15nF and up to 24kV insulation level. The product is dedicated for air insulated switchgears and could be used also as support insulators with bending forces.

Main Features Measurement and display of the transmitter’s working parameters Excellent audio performance Direct to channel digital exciter with built in RDS encoder Reliable and durable thanks to microstrip technology Forward power, reflected power, heatsink temperature, transistor current and voltage protections Built in silence detector, failover to integrated audio player or IP audio (Adjustable time and threshold) Default audio input can be set between transmitter audio input, IP audio or internal audio player Event logging (Notificaton over e-mail, SMS and Onair Service Center) Remote Control over Internet, TCP/IP and Onair Service Center Internal IP Audio Decoder (Shoutcast, Icecast, Mpeg TS, Mpeg2 TS, Flacstream, PCM Stream) 1+1 Redundancy system ready (N+1 Redundancy System on –D Series) Automatically determines the operating parameters for maximum efficiency when frequency or output power is changed A clean start can be made by returning to factory settings

Main Features Very compact case Measurement and display of the transmitter’s working parameters Excellent audio performance Direct to channel digital exciter with built-in RDS encoder High-reliability use of Microstrip Technology Forward power, reflected power, heatsink temperature, transistor current,and voltage protections Built-in silence detector, failover to integrated audio player or IP audio (Adjustable time and threshold) Audio input selection between transmitter audio input, IP audio, integrated audio player Event logging (Notificaton over e-mail, SMS and Onair Service Center) Remote Control over Internet, TCP/IP and Onair Service Center Internal IP Audio Decoder (Shoutcast, Icecast, Mpeg TS, Mpeg2 TS, Flacstream, PCM Stream) 1+1 Redundancy system ready (N+1 Redundancy System on –D Series) Automatically finds the best working parameters to get maximum efficiency when you change frequency or output power limit Broadcasting artist and song title over RDS