Cast iron - Import export

Housing, grey cast iron. Bearing, ballbearing steel 100Cr6. Seal, rubber NBR. Pillow block bearings consist of a sealed singlerow ball bearing with a spherical outer ring which is mounted in a housing. Because of the spherical outer surface of the bearing, shaft misalignment can be compensated for. The bearings are manufactured with a plus tolerance. This results in transition or press fits when using shafts with htolerances. The shaft is secured by grub screws on the inner ring. In normal applications, pillow block bearings are maintenancefree due to the lifetime lubrication. In difficult environmental conditions relubrication can be carried out over the grease nipple. All housing dimensions are nominal dimensions for which the usual casting tolerances must be taken into consideration.

Pig iron is one of the most liquid alloys due to its technical qualities and optimal price. Improvement of production and technological processes, updating of equipment and the qualifications of our specialists allow us to offer our customers high quality casting and service. Casting of cast iron by the method of casting in sandy clay molds The size of the castings 460 mm x 360 mm; Casting height up to 400 mm; Casting weight from 0.2 kg to 20 kg; The productivity of each line is 120 molds per hour. Casting of cast iron by the method of casting in sandy clay molds The size of the castings 1550 mm x 1200 mm; Casting height up to 600 mm; Casting weight from 50 kg to 2500 kg; Productivity 6 10 molds per hour. cast iron of the following grades gray cast irons SCh 15, SCh 20, etc.; high strength cast irons VCh 450 10, VCh 400 15, VCh 420 12, VCh 507, VCh 603, etc.; low alloyed silicon heat resistant and wear resistant cast irons ChKh, IChKh, ChS, ZhChS

we are ready to supply you with all kinds of Iron ingots! C: 4.30- 4.50 Si: 1.5- 2.00 Mn: 0.30- 0.70 P: 0.07- 0.15 S: 0.07- 0.15 Cr: 0.12-0.32 Please feel free to contact me if you need any further information. Mobile: +905318337385 Email: y.nazari@tedoraco.com Website: www.tedoraco.com

Flanged PN16 (8” Available Flanged PN10), Cast Iron Body, Cast Brass Seat, Stainless Steel Stem, Inside Screw, Non-rising Stem, Conforms to DIN 3202 F4, Rated PN16, Temperature -10°C to 120°C.

İFYIL Vera Pellet Fueled Smokeless Healthy Cast Iron Grill Grill & Barbecue (2 Kg Pellet Gift) - Black IFYIL PELLET HEATING SYSTEM STOVE BOILERS WOOD HVAC Özerteknik A.Ş. Company has been existing in heating sector for 28 years and established İfyıl Termo İklimlendirme San. ve Tic. Ltd. Şti. Industry Company in 2009 for the brand name “IFYIL” offering modern innovative solutions for heating systems. İfyıl Termo factory was established on 6.000 m2 of a total area of 20.000 m2. Company has already achieved an image and prestige on the market with 70 professional staff with the most modern know-how. In this regard, priorities of R & D Department of İfyıl Termo İklimlendirme are efficiency, energy saving and comfort.

Applications of structural steel hollow sections include hoists, frame structures, and beams and columns. With structural steel hollow sections, you can significantly reduce the weight of your steel structures and achieve savings in material and manufacturing costs – without limiting freedom in design.

Stainless steel tubes have become an indispensable part of everyday life. We hold onto them on the bus or use them as railings in houses. In the furniture industry, stainless steel tubes are used as wardrobe rods and as components for furniture. In their largest form, they serve as pipelines for oil and gas.

Whether chassis applications with high dynamic stress and safety-relevant functions or lightweight solutions for the highest crash requirements. Our claim is to find the technically and economically best solution for your individual requirements

Tubes made of aluminum offer various advantages, such as corrosion resistance, low weight and high stability. Aluminum tubes are very durable and can be recycled without loss of quality. A wide variety of constructions can be realized with tubes made of aluminum.

Slide

Induction hardened shafts, manufactured to the tightest tolerances according to ISO h6, piston rods for the hydraulic sector or headrests in the automotive sector. These are just three of many hundreds of application examples. Further applications can be found in railroad technology, shipbuilding and renewable energy.

Swivel

Swivel

Slide

Slide (high)

Saddlery buckle

Saddlery buckle-set incl. slide

Reference surfaces precision machined Note: Ring bolts for lifting are supplied. A cover prevents the cavities filling with swarf. Drawing reference: machined faces: +0.2 mm/ +0.5 mm unmachined faces: ±2 mm

Grid spacing 50 ±0.02 mm. Tombstones with grid holes are used on horizontal machining centres. The alphanumerically labelled grid holes guarantee a defined assignment of clamping elements by repeat setups. The tombstones conform to machine tables for machine tools acc. to DIN 55201 and JIS 6337-1980. Please order locating pins for positioning subplates on machine tables acc. to DIN 55201 separately. Please order protection plugs to plug unused grid holes separately. Ring bolts for hoisting are supplied. Other dimensions available on request. Drawing reference: 1) grid hole 2) hole for DIN 912 cap screw (D3/D4)

Grid spacing 50 ±0.02 mm. Tombstones with grid holes are used on horizontal machining centres. The alphanumerically labelled grid holes guarantee a defined assignment of clamping elements by repeat setups. The tombstones conform to machine tables for machine tools acc. to DIN 55201 and JIS 6337-1980. Please order locating pins for positioning subplates on machine tables acc. to DIN 55201 separately. Please order protection plugs to plug unused grid holes separately. Ring bolts for hoisting are supplied. Other dimensions available on request. Drawing reference: 1) grid hole 2) hole for DIN 912 cap screw (D3/D4)

On request: Other slot widths. Drawing reference: machined faces: +0.2 mm/ +0.5 mm unmachined faces: ±2 mm

GJL 250 annealed or EN AW-7075. Drawing reference: machined faces: ±0.25 mm length tolerance: ≤200 mm: +3/+10 >200 mm ≤590 mm: +8/+15 ≥600 mm: +20/+50

Round baseplates with T-slots are used for constructing modular fixtures. These baseplates are positioned and mounted directly on machine tables. The precise longitudinal and transverse slot spacing ensures very high repeat clamping accuracy. The aligning holes are used to align the baseplate on the machine table. Please order locating pins to locate the baseplates separately. Ring bolts with T-nuts for hoisting are supplied. Other dimensions available on request. On request: other dimensions. Drawing reference: 1) hole for DIN 912 cap screw (D4)

Pulley with cast iron wheel. Steel pin, hook and frame.

OSCAR TV Stand Material: Laminated MDF pannel and metal handles and legs in Gold color. W:150cm, H:50cm, D:35cm. Wrapped with soft plastic sheet and boxed in triple wall cardboard box. Available in different color and patterns. Please ask for our catalog.

We can propose a suitable offer for pig iron ingot based on your needs. Please contact us: Mob. / WhatsApp: +98 991 206 4049 Email: s.jaahngiri@mtecompany.com We are by your side to create a stable and productive cooperation; you just need to contact us.