Energy systems - Import export

Safely guide many different cables in a confined space with e-spool. e-spool uniquely combines two different energy supply systems: one standard energy chain is guided by a roller, providing the correct length and tension of the energy supply system through an integrated spring. In the home position, the energy chain is completely rolled up to save space. The twisterband connects the roller with the shaft end block, serving as an interface to the supply side cables. - According to DIN EN 17206 and DGUV principle 315-390 - No tensile strain on the cables - Energy supply is possible in all directions (horizontal, vertical, diagonal) - Space-saving, no "chain station", as the energy chain is rolled up in the starting position, ensuring the paths remain clear - Cables can be retrospectively added or changed - Maximum extension and retraction speed 1m/s

Maintenance-free, compact, quiet and cost-saving complete system - the alternative to the busbar system. For the safe guidance of energy, data, air and liquids in ONE system. - Easy to clean - No particle pollution due to abrasion - Quiet, lubrication-free, and easy to install - Operating speeds of up to 6 m/s in high-acceleration applications - Data rates up to 10 Gbit/s. Safely guides FOC and bus cables - Low space requirement

Safe energy and data transmission The igus® Chainflex® cable range offers a choice of over 850 different cables, available from stock. A main focus of the range are the data and bus cables. Solutions based on copper, glass or plastic fiber optic cables are provided for almost all bus systems in industrial use. We continue to provide you with all supply cables for your drive systems such as motor cables with and without brake/tacho cables and the matching feed cables. Ready assembled with plugs and sockets on request. Cost-reducing assembly The use of pre-assembled E-ChainSystems® enables expensive assembly hours at the place of installation to be considerably reduced. Functionally tested systems guarantee that plant components are soon put into operation. Assembly service We would be pleased to send you an offer for complete solutions, including all assembly services. You do not tie up your own resources and you have a trouble-free energy supply system for the future at a fixed price. LBT FLIZZ® - High speeds and accelerations Travel distances up to 120m, travel speed up to 8 m/s Suitable for moving or stationary controls, ideal for all bus systems When light weight is required When quiet, maintenance-free operation is required When rust-proof property is required At -10°C to +60°C constant temperature At accelerations over 10 m/s² Energy supply system for all media, not only electrical Also suitable for outdoor use (with reduced load data) Your benefit from LBT FLIZZ® Guaranteed service life Cost-effective compared with conventional energy supply systems Cable protected against dirt, rain, sun, ice, snow and leaves Insensitive to wind and motion Good resistance to chemicals, solvents, etc. Use of special cables possible, e.g. servo drive cables, fiber optic cables, bus systems etc. almost maintenance free Quick and easy installation due to delivery as a ready-assembled system Easy integration with existing plants Cable length 50% of the travel distance No central cable junction No effort required to maintain carriages Sewage treatment plant Longitudinal scrapers Sand traps Rain water overflow reservoir Galvanizing equipment Cranes Plant construction Space-saving and compact energy supply with LBT FLIZZ® - low maintenance system, delivered pre-fitted with ready-assembled igus® E-Chain Energy supply system protected from wind and weathering. The used materials are weather-resistant, as well as resistant against most chemicals, oils, fats, coolants and solvents Solid plastic with powder-coated support tubes Modular assembly: the system can be enclosed with intermediate panels! Can be delivered pre-fitted Variable fields, which are simply screwed on top of each other Glide rail integrated in the profile

Save 88% assembly time with cost-effective energy chain for intralogistics and crane systems. The igus autoglide 5 system transfers energy, data, fluids, and air safely in a single system, requires almost no maintenance, and is also very cost-effective, including a 2400.07AG.075.0 e-chain, steel cable guide, harnessed bus cable, and five single cores of 6mm² each.

Contains freeze-dried organic beef liver (40%), kidney (20%), heart (10%), pancreas (10%), spleen (10%), lungs (10%). The best natural supplement in the world. Wide bioavailable nutrient spectrum for best absorption. Supports overall health and prevents vitamin & mineral deficiencies. Supports immune system, energy, metabolism, mood and methylation.

Brine concentration In many applications of the chemical industries, a concentration by evaporation of mixtures and brines is necessary. Without membrane technologies, the whole volume flow of the process has to be evaporated. With an upstream reverse osmosis plant, the liquid flow can be pre-concentrated and condensed by a factor of 50-75%. The remaining volume flow is treated by a conventional evaporator. The energy consumption of the membrane systems is mostly significantly below of the consumption of the thermal processes, what makes a condensation by membrane plants very economical. Similar product: High pressure reverse osmosis

The LxxxT-44 current sensor is a completely new development from GWP, which enables the advantages of sensor technology also for the low voltage area. The design is made for installation on low voltage cables either isolated or not isolated. It combines a wide range behaviour with low costs. The usage of correction factors enables even better corrections in combination with dedicated devices.

The LxxxR-21 current sensor is a completely new development from GWP, which enables the advantages of sensor technology also for the low voltage area. The design is fitting in existing common housings of CT´s, but with wide range behaviour and lower costs.

The LxxxR-32 current sensor is a completely new development from GWP, which enables the advantages of sensor technology also for the low voltage area. The design is fitting in existing common housings of CT´s, but with wide range behaviour and lower costs.

The NxxxE-0U current sensor is dedicated for installation on the cables of a gas or insulated switchgear in the primary or secondary energy distribution. The design is split able, which makes it able to put the sensor on an existing cable. Due to cost effective construction, the sensor has a very high cost-benefit ratio

The NxxxT-0U current sensor is dedicated for installation on the cables of a gas or insulated switchgear in the primary or secondary energy distribution. The design is split able, which makes it able to put the sensor on an existing cable. Due to cost effective construction, the sensor has a very high cost-benefit ratio.

The NxxxE-xx current sensor is dedicated for installation on the cables of a gas or insulated switchgear in the primary or secondary energy distribution. The design is split able and divided into 3 separate rings, which makes it able to put the sensor on an existing cable. The rings makes it possible to install this product inside switchgears, where the pole distance of the phases can vary up to 1.5m.

The NxxxT-xx current sensor is dedicated for installation on the cables of a gas or insulated switchgear in the primary or secondary energy distribution. The design is split able, which makes it able to put the sensor on an existing cable. Earthing could be done at the current sensor, or through the shielding of the cable or through the S2 connection inside the IED.

The NxxxR-xx current sensor is dedicated for installation on the bushing of a gas insulated switchgear in the secondary energy distribution. The design is slim and the holding system can be adapted to different kind of T-connectors. Earthing could be done at the current sensor, or through the shielding of the cable or through the S2 connection inside the IED.

The A240P-5K voltage detector is a voltage sensor based on a capacitive divider principle. Inside the product there is a high stable capacitor, with a high capacitance and up to 15nF and up to 24kV insulation level. The product is dedicated for gas insulated switchgears and is used for asymmetric T-connectors from a range of different manufacturers.

The A240S-5K voltage detector is a voltage sensor based on a capacitive divider principle. Inside the product there is a high stable capacitor, with a high capacitance and up to 15nF and up to 24kV insulation level. The product is dedicated for air insulated switchgears and could be used also as support insulators with bending forces.

The voltage sensors of Type TxxxC-xx are commonly used in asymmetric T-connectors of different manufacturers. The T-connectors are usually closed with a dedicated blind plug of a T-connector manufacturer, this could be removed, and the sensor could be installed into this place. The sensor is than connected with the common earth and with the secondary connection cable to an IED. The product range -0U is especially made with maximum cost effectiveness by utilizing correction factors

The voltage sensors of Type T360Cxx is made for T-connectors with a Type C cone acc. IEC 50181. The Tconnectors are usually closed with a dedicated blind plug of a T-connector manufacturer, this could be removed, and the sensor could be installed into this place. The sensor is than connected with the common earth and with the secondary connection cable to an IED. This sensor is especially made for a insulation level of 36kV.

The temperature sensor system is made for solving a big problem in switchgears. It is modular and can be used in cable compartments of gas insulated switchgears or even in air insulated switchgears, directly on the medium voltage busbars to monitor temperature rises, especially in busbar conjunction points. The system could be delivered with wired cost efficient solutions for low voltage applications or on medium voltage cables or completely galvanic separated with a Power over fiber connection from the base station to the temperature sensors directly attached to the primary busbar.

The A240F-16K is a high voltage coupling capacitance dedicated for Power-line-carrier communication. It is used in outdoor applications, usually on poles. Inside of the product is a big capacitance of over 10nF, which makes the communication through the network possible.

The K240A-xx is one of the newest developments from GWP. It is a combined voltage and current sensor in block type form factor dedicated for air insulated switchgears in the primary energy distribution. It contains a wide range current sensor and a voltage sensor, and it is even possible to put a 3rd component, a low power conventional current transformer inside to enable the maximum flexibility for the customer.

The K120A-xx is one of the newest developments from GWP. It is a combined voltage and current sensor in block type form factor dedicated for air insulated switchgears in the primary energy distribution. It contains a wide range current sensor and a voltage sensor, and it is even possible to put a 3rd component, a low power conventional current transformer inside to enable the maximum flexibility for the customer

The combined voltage and current sensors of Type K240F-xx are used in outdoor installations usually on poles. The sensor is connected with the common earth by the installation point of the product and with the secondary connection cable connected to an IED. It can resist all weather conditions and environmental changes due to the usage of silicon material, which is also used as standard materials for high voltage insulators.

One of the latest developments of GWP is the ultra-wide range current sensor for the primary energy distribution. This product has an incomparable measurement range starting from 0,5A up to 100.000A with a defined accuracy. Primary use case is in combination with protection relays.

One of the latest developments of GWP is the ultra-wide range current sensor for the primary energy distribution. This product has an incomparable measurement range starting from 0,5A up to 100.000A with a defined accuracy. Primary use case is in combination with protection relays.

The LxxxT-28 current sensor is a completely new development from GWP, which enables the advantages of sensor technology also for the low voltage area. The design is made for installation on low voltage cables either isolated or not isolated. It combines a wide range behaviour with low costs. The usage of correction factors enables even better corrections in combination with dedicated devices.

The voltage sensors of Type TxxxB-xx is dedicated to the new T-connector of Euromold/Nexans, called (K) (M)480TB. The T-connectors are usually closed with a dedicated blind plug of a T-connector manufacturer, this could be removed and the sensor could be installed into this place. The sensor is than connected with the common earth and with the secondary connection cable to an IED.

PG 5030 PLUS is a practical security equipment which has been widely applied for public security organs and its small tunnel design is perfect for identification of objects in letters, parcels, handbags, backpacks and so on. PG 5030 PLUS has extended protective cover and double-layer lead curtains in both tunnel ends, which can guarantee the operators' and passengers’ safety. PG 5030 PLUS has high mobility (and could be easily move to any locations which need the security inspection) through rolling casters, integrated monitor and keyboard. PG 5030 PLUS also can be operated remotely via customized keyboard line, video cable and USB cable which can up to 5 meters long.

Nowadays, modern architecture is characterized by the increasing use of glass in most areas of construction. Homes and offices, flooded with light, play an important role in our quality of life. But why the consumer should choose the double glazing energy technology systems and not ordinary glass? The high degree of transparency, ordinary glass, leading to an increase of heat and ultraviolet light inside the building. This problem solves the use of modern energy third generation of windows with the "ability" to hinder the emission of heat from the warmer to the cooler side (hence called low emissivity (Low-E) glass, our Energy Glass they help to "keep" the heat of our home through the winter and in the summer the heat out of the external environment, saving energy (for heating or room air conditioning, respectively) .At the same time allow for maximum light transmission in any application!