Gas cylinder - Import export

Brand new gas cylinder full of Nitrogen. The bottle contains 8 liters of high quality pure NITROGEN, designed for e.g. checking the tightness of various types of valves, air conditioning, and pumping wheels. The cylinder is new and has a working pressure of 150 bar. The cylinder and valve are manufactured according to EN 1964:1999 and have an ADR / RID compliance mark and a -40°C mark. ATTENTION! Our cylinders have a threaded valve (W24.32x1 / 14) "RH and it is technically possible to fill it. However, filling problems can occur in certain countries such as France, Great Britain, Finland. due to the type of valve used. However, filling is possible without problem in most countries. TECHNICAL DATA: Valve: W24,32 x 1/14 "RH Content: Nitrogen Capacity: 8l Working pressure: 150 bar Quantity of gas: ~1.6m3 Height: 82 cm Diameter about: 14 cm Weight: ~14 kg Can be used throughout the European Union without additional testing for 10 years Powder coated according to current standards PN-EN

Best Price 13.6kg gas cylinder r134a refrigerant gas

VOGELMANN - ARGON / CO2 GAS CYLINDER The bottle contains 8l / 2.4m3 of high-quality argon and CO2 mixture with a working pressure of 200 bar. The protective cap protects the valve against damage during transport or storage. The cylinder and valve are made in accordance with the EN 1964: 1999 standard, have the PI mark and comply with the requirements of ADR / RID. TECHNICAL DATA: Valve: W 21.8 x 1/14 DIN 477 Content: Argon 82%, Carbon Dioxide 18% Capacity: 10l Working pressure: 200 bar The amount of gas: ~ 2.4m3 Height 96 cm Diameter about 14 cm weight ~ 17 kg Powder coated according to the currently applicable PN-EN standards It can be used throughout the European Union without additional testing for 10 years from the date of production.

Brand new gas Cylinder full of Argon 4.8 The cylinder is filled with a high quality 99,998% Argon welding compound. A protective cap protects the valve from damage during transport or storage. The cylinder is new and has a working pressure of 150 bar. The cylinder and valve are manufactured according to EN 1964:1999 and have the conformity mark π (pi) with the requirements of ADR / RID. ATTENTION! Our cylinders have a threaded valve (W21.8x1 / 14) and it is technically possible to fill it. However, filling problems can occur in certain countries such as France, Great Britain due to the type of valve used (G5/8") or Finland (W24,32x1/14) However, filling is possible without problem in most countries. TECHNICAL DATA CYLINDER GAS: Valve: 21.8 x 1/14 DIN 477 Content: 99.998% Argon Capacity: 8l Working pressure: 150 bar Quantity of gas: ~1.5m3 Height: 82 cm Diameter about: 14 cm Weight: ~13 kg Can be used throughout the European Union without additional testing for 10 years Powder coated according to current standards PN-EN

Brand new gas Cylinder full of Argon and Carbon Dioxide mixture – Ar/CO2. A protective cap protects the valve from damage during transport or storage. The cylinder is new and has a working pressure of 150 bar. The cylinder and valve are manufactured according to EN 1964:1999 and have the conformity mark π (pi) with the requirements of ADR / RID. ATTENTION! Our cylinders have a threaded valve (W21.8x1 / 14) and it is technically possible to fill it. However, filling problems can occur in certain countries such as France, Great Britain due to the type of valve used (G5/8") or Finland (W24,32x1/14) However, filling is possible without problem in most countries. TECHNICAL DATA: Valve: 21.8 x 1/14 DIN 477 Content: Argon (82%) + CO2 (18%) Capacity: 8l Working pressure: 150 bar Quantity of gas: ~1.5m3 Height: 82 cm Diameter about: 14 cm Weight: ~13,5 kg Can be used throughout the European Union without additional testing for 10 years Powder coated according to current standards PN-EN

Compressed gases are removed from gas cylinders using RIEGLER flange pressure controllers, which are used during welding, cutting or other related processes. We offer flange pressure controllers according to DIN EN ISO 2503 for flammable and non-flammable gases up to 200 bar and up to 300 bar. All flange pressure controllers are each equipped with a pressure gauge for the display of the cylinder contents and the working pressure. In addition you can also get flange pressure controllers with a flowmeter. Our flange pressure controllers can be used for oxygen, compressed air, nitrogen, carbon dioxide, argon, acetylene, hydrogen, methane, illuminating gas and natural gas.

igubal® clevis joint, mm With and without pin and circlip igubal® clevis joint, mm igubal® clevis joints with spring loaded pins, mm igubal® clevis joints with spring loaded pins, mm igubal® clevis joint combination, mm Complete knee joints consisting of clevis joint and rod end bearing igubal® clevis joint combination, mm igubal® spring loaded pin, mm igubal® spring loaded pin, mm igubal® pin, mm GBM/GSR Pin and circlip igubal® pin, mm GBM/GSR igubal® clevis joint, detectable, mm igubal® clevis joint, detectable, mm igubal® clevis joints with spring loaded pins, detectable, mm igubal® clevis joints with spring loaded pins, detectable, mm igubal® spring loaded pin, detectable, mm igubal® spring loaded pin, detectable, mm Most important features: Very low weight High tensile forces Combinable with rod end bearings of the dimensional series E vibration dampening Noise dampening Available for left-hand and right-hand threads igubal® clevis joints are solid polymer made of igumid G according to DIN 71752, which can be combined with the rod end bearings of the dimensional series E as counterpiece. They consist of clevis joint, pin and circlip, or alternatively with spring loaded pin. igubal® spherical bearings application examples When to use it? When high stiffening is required When freedom from corrosion is desired When lubrication should not be used When you want to save weight When maintenance-free dry operation is desired When the easiest installation should be implemented When combinations with pneumatic cylinders and gas struts should be implemented When not to use? When temperatures above +200°C prevail When dimensions over 20 mm are needed igubal® clevis joint, mm With and without pin and circlip igubal® clevis joint, mm igubal® clevis joints with spring loaded pins, mm igubal® clevis joints with spring loaded pins, mm igubal® clevis joint combination, mm Complete knee joints consisting of clevis joint and rod end bearing igubal® clevis joint combination, mm igubal® spring loaded pin, mm igubal® spring loaded pin, mm igubal® pin, mm GBM/GSR Pin and circlip igubal® pin, mm GBM/GSR igubal® clevis joint, detectable, mm igubal® clevis joint, detectable, mm igubal® clevis joints with spring loaded pins, detectable, mm igubal® clevis joints with spring loaded pins, detectable, mm igubal® spring loaded pin, detectable, mm igubal® spring loaded pin, detectable, mm

igubal® rod end bearing, female thread With female thread in metric and inch dimensions igubal® rod end bearing, female thread igubal® rod end bearing, male thread With male thread in metric and inch dimensions igubal® rod end bearing, male thread igubal® rod end bearing CL For simplified mounting, with inner and outer threads in metric dimensions igubal® rod end bearing CL igubal® rod End Bearing CL DT For simplified installation, detectable with female thread in metric dimensions igubal® rod End Bearing CL DT igubal® fitting screw, mm Fitting screw with circlip igubal® fitting screw, mm When to use it? When you want to save weight When rotating, oscillating and linear movements should be implemented When high-frequency oscillations/vibrations predominate When a low-noise operation is desired When an electrically insulating part is required When freedom from corrosion is desired For combinations with pneumatic cylinders and gas struts When chemical resistance is required When high stiffening is required When not to use? When you have temperatures above +80°C (then HT options) When rotation speeds in excess of 0.5 m/s should be implemented When very high tensile and lateral loads prevail When applications should be implemented with hydraulic cylinder When dimensions over 30 mm are needed igubal® rod end bearing, female thread With female thread in metric and inch dimensions igubal® rod end bearing, female thread igubal® rod end bearing, male thread With male thread in metric and inch dimensions igubal® rod end bearing, male thread igubal® rod end bearing CL For simplified mounting, with inner and outer threads in metric dimensions igubal® rod end bearing CL igubal® rod End Bearing CL DT For simplified installation, detectable with female thread in metric dimensions igubal® rod End Bearing CL DT igubal® fitting screw, mm Fitting screw with circlip igubal® fitting screw, mm Special properties of the igubal® rod end bearings Maintenance-free, self lubricating High stiffening Very high fatigue strength in varying loads Compensation for alignment errors Compensation of edge loads Insensitive to dirt, dust and lint balls Resistant to corrosion and chemicals High dampening qualities Suitable for rotary, oscillating and linear movements Very low weight Dimensional series K and E, dimensions according to DIN ISO 12240 Version with metal sleeve in the spherical ball for enhanced torque Tolerances igubal rod end bearings can be used, according to the application, with different tolerances. They are designed with a large clearance in the standard product, which enables a secure operation even under high peripheral speeds. The bore of the inner ring has a tolerance according to E10. The shafts should have a tolerance between h6 and h9. Please contact us in case you require lower or more bearing tolerances. Loads igubal® rod end bearings take high forces in normal ambient temperatures, have excellent dampening properties and weigh only a fifth of the conventional metallic bearing housing. In particular cases the load carrying capacity of the rod end bearings should be checked in a practical trial especially with high constant loads and at higher temperatures. Coefficients of surface friction and speeds Rotary motions of the mounted shaft take place directly in the bearing ball made of iglidur® W300. The advantage of this plastic/steel plain bearing is that high speeds can be achieved in dry operation. Taking the radial loads into account, maximum surface speeds up to 0.5 m/s rotating can be attained. The maintenance-free igubal® rod end bearings casually permit linear and oscillating movements of the shaft. Delivery program igubal® rod end bearings are available in the dimensional series K and E for shaft diameters of 2 to 30 mm in all dimensions according to DIN ISO 12240, and of course respectively in the Form A - with male thread and Form B - with female thread The dimensional series K and partly E are moreover available in inch dimensions and – as special version – with a stainless steel sleeve in the spherical ball. Thereby an essentially higher tightening torque is possible than with the plastic spherical ball. Please ask us for other sizes. igubal® rod end bearings - Applications igubal® rod end bearings - Applications Temperatures Dimensional series K in A+B variants for temperatures upt to +200°C (HAT material).

Hydrogen cylinder filled with a mixture of 95% nitrogen and 5% hydrogen. It is designed to check the tightness of air conditioning. 8l cylinders have a protective cap These cylinders are brand new. 8l cylinders have a working pressure of 150 bar. Cylinders and valves are made in accordance with the EN1964: 1999 standard and have the π mark of compliance with ADR / RID requirements and the -40 ° C mark. They can be filled throughout the European Union. TECHNICAL DATA: Valve: W 24.32 x 1/14 " Content: 95% nitrogen and 5% hydrogen Capacity: 8l Working pressure: 150 bar The amount of gas: ~ 1.8 m3 Height: 82 cm Diameter: 14 cm Weight: ~ 15 kg

VOGELMANN REDUCTION G3 / 4 "- W21,8x1 / 14" Adapter designed for regulators, argon, carbon dioxide gas cylinders and mixtures of these gases. Internal thread: G 3/4 " External thread: W21.8x1 / 14

VOGELMANN REDUCTION W21.8 x 1/14 to G 3/4 " Adapter designed for regulators, argon, carbon dioxide gas cylinders and mixtures of these gases. Internal thread: W21.8x1 / 14 External thread: G 3/4 " Made of brass

Smartwhip, 580g n20 Gas cylinders Europe. Model Number: 434665 Brand Name: Deluxe Origin: UK Small Orders: Accepted Key Specifications/ Special Features: Boasting 615 grams of pure food-grade cream charger in each cylinder, Smartwhip allows you to charge one siphon after the other in rapid succession. The ultimate tool for improving workflow efficiency, Smartwhip is cost-efficient by design, easy to operate and affords greater control over each creation's texture. High-quality Food-Grade E942 (purity tested at 99.9%) Improves workflow efficiency Handy & durable design Easy disposal: All cylinders come with a pressure release nozzle to fully release the gas for disposal. Cream Deluxe Cream Charger 580g Cylinders supplier Type: Dessert Tools Commercial Buyer: Restaurants, Fast Food and Takeaway Food Services, Food & Beverage Stores, Food & Beverage Manufacture, TV Shopping, Department Stores. To Place Your Order Contact Via : johnryantradingltd007@gmail.

Control valve and Flow indicator for use with calibration gas cylinder. Flow meter markings are nominally 0.5 & 1.0 litres/min.

Price: $34,000.00 Offers Considered This ’16 Polaris RZR is powered by a ProStar 999CI, 2 Cylinder Gas Engine with 750 miles on it, paired with a CVT Transmission. This beauty is shown in Red and Grey with a Black Vinyl Interior and has been garage kept. Features: 4-Seater EPS (Electronic Power Steering) Super ATV 7-10” Lift Upper and Lower A-Arms Trailing Arms Radius Rods Rhino Axles 6” GDP Portals 40x10.5x20 Intimidator Tires MSA 20” Wheels Walker Evans Remote Res Shocks Tender Springs with Billet Crossover Rings on Rear Full Tinted Windshield Roaring Toyz Billet Sway Bar Mounts Roaring Toyz Speedo Bezel Billet Gas Cap