Worm gears - Import export

Worm screw steel. Worm wheel CuZn37Mn3Al2PbSiS40. Version Worm screw with righthand pitch, casehardened HV 620 – 700, flanks and hole ground. Note for ordering Wheels/screws can only be combined to form a worm gear if they have the same centre distance and transmission ratio. Note A worm gear consists of a worm screw (shaft) and a worm wheel. Suitable for forming worm drives with a 90° shaft angle. A worm drive enables very large speed reduction ratios with a single stage. The toothing has the flank shape K. The engagement angle is 15°. The worm gears are prebored. The stated T2 output torques are the permissible output torques on the worm wheel. These apply for an input speed of 2800 rpm of the worm screw. The worm gears are suitable for continuous operation at high speeds and high torques. Attention 22500171002 Screw polished only. 22500172002 Worm wheel with helical gear toothing.

The new direct-current motors with worm gear enable quiet and economically efficient operation with drylin® lead screw units. The worm wheel has a spline to which the drive pin of the linear unit is connected. As a result, a motor flange and coupling are unnecessary and, this taken in conjunction with the motor adapter angled by 90°, the structure of the linear module is very compact. Thanks to the integrated magnetic rotary encoder (2-channel hall), the new DC motors are suitable for positioning. - Space-saving and compact design - Easy to fit - Quiet operation - Rotary position encoder included - Suitable for: SLW-BB, SAW, ZLW

Housing aluminium. Worm screw steel, worm wheel special brass. Version Housing anodised. Ball bearing with rubber sealing washer RS. Note Universally applicable and maintenancefree worm drive in one size with a centre distance of 20 mm and 7 different ratios. The housing is sealed to prevent grease leakage and keep dust out. These are left hand worm gears. The rotation direction on the shaft is arbitrary. smooth power transmission simple screw fastening quiet Note FR permissible radial force at FA=0 FA permissible axial force at FR=0

Base and rotary table aluminium alloy. Hollow shaft stainless steel. Preloaded worm gear steel. Claw coupling aluminium with polyurethane coupling spider. Version Aluminium alloy anodised. Note for ordering The unit is supplied with the position of cable outlet or control unit as shown in the drawing. Note Rotary positioning stages for motorised adjustment and positioning tasks. The preloaded worm gear runs virtually playfree. The bearing of the worm shaft offers maximum radial rotational accuracy. Cables can be routed through the large bore in the hollow shaft. The adjustable positioning ring is used to determine the rotational reference point to the position of the assembled part. Proximity switches can be mounted with the optionally available sensor holder (21094). The suitable programming software and interface cable for the stepper motor with positioning control are available as accessories (2500015).

In 2015 the product name was changed. The old product name was Castrol Olistamoly 2. High-performance grease with MoS2 solid lubricants Description Castrol Molub-Alloy 370-2 (previous product name Castrol Olistamoly 2) is a high-performance grease with MoS2 solid lubricants for universal applications. Thanks to its high pressure absorption capacity, it is particularly suitable for long-term lubrication of rolling and plain bearings. Application Castrol Molub-Alloy 370-2 can be used for highly loaded roller and plain bearings, threaded spindles and guides of lifting devices, open gears, worm gears at low speeds, tie rod and universal joints, brake cams and splines, as well as in difficult operating conditions such as dust and vibrations. Castrol Molub-Alloy 370-2 is suitable for maintenance-free or low-maintenance long-term lubrication

In 2015 the product name was changed. The old product name was Castrol Olistamoly 2. High-performance grease with MoS2 solid lubricants Description Castrol Molub-Alloy 370-2 (previous product name Castrol Olistamoly 2) is a high-performance grease with MoS2 solid lubricants for universal applications. Thanks to its high pressure absorption capacity, it is particularly suitable for long-term lubrication of rolling and plain bearings. Application Castrol Molub-Alloy 370-2 can be used for highly loaded roller and plain bearings, threaded spindles and guides of lifting devices, open gears, worm gears at low speeds, tie rod and universal joints, brake cams and splines, as well as in difficult operating conditions such as dust and vibrations. Castrol Molub-Alloy 370-2 is suitable for maintenance-free or low-maintenance long-term lubrication.

In 2015 the product name was changed. The old product name was Castrol Olistamoly 2. High-performance grease with MoS2 solid lubricants Description Castrol Molub-Alloy 370-2 (previous product name Castrol Olistamoly 2) is a high-performance grease with MoS2 solid lubricants for universal applications. Thanks to its high pressure absorption capacity, it is particularly suitable for long-term lubrication of rolling and plain bearings. Application Castrol Molub-Alloy 370-2 can be used for highly loaded roller and plain bearings, threaded spindles and guides of lifting devices, open gears, worm gears at low speeds, tie rod and universal joints, brake cams and splines, as well as in difficult operating conditions such as dust and vibrations. Castrol Molub-Alloy 370-2 is suitable for maintenance-free or low-maintenance long-term lubrication.

he Gebuwin range of hand driven worm gear winches are known for their robust construction. The hoisting capacities are calculated according to the first cable layer on the cable drum. All of the worm gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The worm gear winches are more safe than the spur gear winches, due to the fact that 50% of the braking is done by the friction loss in the transmission. Subsequently, the load on the pressure brake is greatly reduced. Due to the higher friction loss in the transmission, the worm gear winches have a lower performance efficiency than the spur gear winches. The winches have a static safety factor of minimum 4. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance free bearings. From the 2000 kg capacity winch and up, the winches are fitted with a second drive shaft, which makes it possible to work with two speeds.

These winches are used for both hoisting and pulling of loads. These worm gear winches are equipped with a cable drum free spool, making it possible for the cable to be easily pulled from the drum, due to the fact that the cable drum can be detached from the transmission. As an extra option, it is possible to have an adjustable slipping brake on the cable drum which allows for a controlled release of the cable. As well as this, these winches can be mounted in such a way that allows for the cable to come free from the winch horizontally. The Gebuwin range of hand driven worm gear winches are known for their robust construction. The listed capacities refer to the hoisting capacities which are calculated according to the first cable layer on the cable drum. In the case of these winches being used for the pulling of loads, the hoisting capacity should be multiplied roughly by a factor of 2.5. The worm gear winches are equipped with a load pressure brake. This brake holds the load at...

The EP range is always equipped with a planetary gear box as transmission. The winches are compact and have a robust construction. he EP range is available only as 400V. All of the winches are equipped with maintenance free bearings. The winches are normally delivered as pulling winches but upon request, they can be delivered as hoisting winches. Most parts are made from steel and have been either painted or zinc plated. These winches have a high performance efficiency and are low in maintenance. When compared with the EW range, these winches have a larger cable storage and their welded steel frame provides a more stable construction. Also there are more additional options. The winches comply with protection classification IP55 and insulation classification F. As standard they are equipped with 2 speeds, as well as an optional 3 speed choice for every type. The connection duration is S3 - 25% up to S3 - 40%.

The Gebuwin hand driven worm gear winch is known for its robust and compact construction. The hoisting capacity of the winch is calculated according to the first belt layer around the drum. The winch has a rear exit, which also enables it to be used as a pulling winch. As pulling winch, a load of up to approx. 2000 kg can be moved horizontally. The worm gear winch is fitted with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The crank can be adjusted in length and is recoil-free. All rotating parts run in maintenance free bearings. This winch is available in a grey/black paint and a zinc plated version, which gives an improved rust protection. Type and version coding: WB = worm gear belt winch: hoisting load of 750kg/ pulling load 2000kg GR = grey (RAL 7035) / black (RAL 9005) painted according to DIN 12944-C1 EV = electrolyte zinc plated, min. 6 microns

A design of the present robust worm gear winches of 3 capacities which are constructed with a fully covered gearing (IP 54). The cable drum, the crank and all outgoing shafts are made of high quality 316 stainless steel. All fasteners are of A4 quality stainless steel. The surface treatment of the steel housing complies with the stringent paint specifications C5M according to DIN/ISO 12944. These winches can be utilized with: sea water and chemical installations. Available optional extra’s: grooved drum multi-cabled drum suitable adjustment for air motor drive AM5000

These winches are used for both hoisting and pulling of loads. These worm gear winches are equipped with a cable drum free spool, making it possible for the cable to be easily pulled from the drum, due to the fact that the cable drum can be detached from the transmission. As an extra option, it is possible to have an adjustable slipping brake on the cable drum which allows for a controlled release of the cable. As well as this, these winches can be mounted in such a way that allows for the cable to come free from the winch horizontally. The Gebuwin range of hand driven worm gear winches are known for their robust construction. The listed capacities refer to the hoisting capacities which are calculated according to the first cable layer on the cable drum. In the case of these winches being used for the pulling of loads, the hoisting capacity should be multiplied roughly by a factor of 2.5. The worm gear winches are equipped with a load pressure brake. This brake holds the load at...

These winches are used for both hoisting and pulling of loads. These worm gear winches are equipped with a cable drum free spool, making it possible for the cable to be easily pulled from the drum, due to the fact that the cable drum can be detached from the transmission. As an extra option, it is possible to have an adjustable slipping brake on the cable drum which allows for a controlled release of the cable. As well as this, these winches can be mounted in such a way that allows for the cable to come free from the winch horizontally. The Gebuwin range of hand driven worm gear winches are known for their robust construction. The listed capacities refer to the hoisting capacities which are calculated according to the first cable layer on the cable drum. In the case of these winches being used for the pulling of loads, the hoisting capacity should be multiplied roughly by a factor of 2.5. The worm gear winches are equipped with a load pressure brake. This brake holds the load at...

These winches are used for both hoisting and pulling of loads. These worm gear winches are equipped with a cable drum free spool, making it possible for the cable to be easily pulled from the drum, due to the fact that the cable drum can be detached from the transmission. As an extra option, it is possible to have an adjustable slipping brake on the cable drum which allows for a controlled release of the cable. As well as this, these winches can be mounted in such a way that allows for the cable to come free from the winch horizontally. The Gebuwin range of hand driven worm gear winches are known for their robust construction. The listed capacities refer to the hoisting capacities which are calculated according to the first cable layer on the cable drum. In the case of these winches being used for the pulling of loads, the hoisting capacity should be multiplied roughly by a factor of 2.5. The worm gear winches are equipped with a load pressure brake. This brake holds the load at...

These winches are used for both hoisting and pulling of loads. These worm gear winches are equipped with a cable drum free spool, making it possible for the cable to be easily pulled from the drum, due to the fact that the cable drum can be detached from the transmission. As an extra option, it is possible to have an adjustable slipping brake on the cable drum which allows for a controlled release of the cable. As well as this, these winches can be mounted in such a way that allows for the cable to come free from the winch horizontally. The Gebuwin range of hand driven worm gear winches are known for their robust construction. The listed capacities refer to the hoisting capacities which are calculated according to the first cable layer on the cable drum. In the case of these winches being used for the pulling of loads, the hoisting capacity should be multiplied roughly by a factor of 2.5. The worm gear winches are equipped with a load pressure brake. This brake holds the load at...

The Gebuwin range of hand driven worm gear winches are known for their robust construction. The hoisting capacities are calculated according to the first cable layer on the cable drum. All of the worm gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The worm gear winches are more safe than the spur gear winches, due to the fact that 50% of the braking is done by the friction loss in the transmission. Subsequently, the load on the pressure brake is greatly reduced. Due to the higher friction loss in the transmission, the worm gear winches have a lower performance efficiency than the spur gear winches. The winches have a static safety factor of minimum 4. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance free bearings. From the 2000 kg capacity winch and up, the winches are fitted with a second drive shaft, which makes it possible to work with two...

The Gebuwin range of hand driven worm gear winches are known for their robust construction. The hoisting capacities are calculated according to the first cable layer on the cable drum. All of the worm gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The worm gear winches are more safe than the spur gear winches, due to the fact that 50% of the braking is done by the friction loss in the transmission. Subsequently, the load on the pressure brake is greatly reduced. Due to the higher friction loss in the transmission, the worm gear winches have a lower performance efficiency than the spur gear winches. The winches have a static safety factor of minimum 4. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance free bearings. From the 2000 kg capacity winch and up, the winches are fitted with a second drive shaft, which makes it possible to work with two...

The Gebuwin range of hand driven worm gear winches are known for their robust construction. The hoisting capacities are calculated according to the first cable layer on the cable drum. All of the worm gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The worm gear winches are more safe than the spur gear winches, due to the fact that 50% of the braking is done by the friction loss in the transmission. Subsequently, the load on the pressure brake is greatly reduced. Due to the higher friction loss in the transmission, the worm gear winches have a lower performance efficiency than the spur gear winches. The winches have a static safety factor of minimum 4. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance free bearings. From the 2000 kg capacity winch and up, the winches are fitted with a second drive shaft, which makes it possible to work with two...

The Gebuwin range of hand driven worm gear winches are known for their robust construction. The hoisting capacities are calculated according to the first cable layer on the cable drum. All of the worm gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The worm gear winches are more safe than the spur gear winches, due to the fact that 50% of the braking is done by the friction loss in the transmission. Subsequently, the load on the pressure brake is greatly reduced. Due to the higher friction loss in the transmission, the worm gear winches have a lower performance efficiency than the spur gear winches. The winches have a static safety factor of minimum 4. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance free bearings. From the 2000 kg capacity winch and up, the winches are fitted with a second drive shaft, which makes it possible to work with two...

The Gebuwin range of hand driven worm gear winches are known for their robust construction. The hoisting capacities are calculated according to the first cable layer on the cable drum. All of the worm gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The worm gear winches are more safe than the spur gear winches, due to the fact that 50% of the braking is done by the friction loss in the transmission. Subsequently, the load on the pressure brake is greatly reduced. Due to the higher friction loss in the transmission, the worm gear winches have a lower performance efficiency than the spur gear winches. The winches have a static safety factor of minimum 4. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance free bearings. From the 2000 kg capacity winch and up, the winches are fitted with a second drive shaft, which makes it possible to work with two...

The Gebuwin range of hand driven worm gear winches are known for their robust construction. The hoisting capacities are calculated according to the first cable layer on the cable drum. All of the worm gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The worm gear winches are more safe than the spur gear winches, due to the fact that 50% of the braking is done by the friction loss in the transmission. Subsequently, the load on the pressure brake is greatly reduced. Due to the higher friction loss in the transmission, the worm gear winches have a lower performance efficiency than the spur gear winches. The winches have a static safety factor of minimum 4. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance free bearings. From the 2000 kg capacity winch and up, the winches are fitted with a second drive shaft, which makes it possible to work with two...

The Gebuwin range of hand driven worm gear winches are known for their robust construction. The hoisting capacities are calculated according to the first cable layer on the cable drum. All of the worm gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The worm gear winches are more safe than the spur gear winches, due to the fact that 50% of the braking is done by the friction loss in the transmission. Subsequently, the load on the pressure brake is greatly reduced. Due to the higher friction loss in the transmission, the worm gear winches have a lower performance efficiency than the spur gear winches. The winches have a static safety factor of minimum 4. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance free bearings. From the 2000 kg capacity winch and up, the winches are fitted with a second drive shaft, which makes it possible to work with two...

The Gebuwin battery drill powered worm gear winch has a robust build. This winch provides an effective solution for locations without electricity, as well in situations where hoisting of a load is needed for a limited distance. The winch has a flexible coupling for connecting a battery drilling machine or an electric drilling machine. The hoisting capacity of the winch is 200kg which is calculated according to the first cable layer on the cable drum. The closed worm gear box has a transmission with a self braking capacity. This self braking capacity ensures a hold of the load at any required height during hoisting and lowering. All rotating parts run in maintenance free bearings. The winch can be wall mounted or console mounted; it is available in grey/black paint.

The EW range is constructed with a worm gear box as centre point between the electro- motor and the cable drum. The winches are compact and have a robust construction. The EW range is available as 230V and 400V. All of the winches are equipped with maintenance free bearings. The winches are normally delivered as pulling winches but upon request, they can be delivered as hoisting winches. Most parts are made from steel and have been either painted or zinc plated.

The worm gear winches as from 1000kg and up can also be driven by means of a portable air motor. The motor can be easily attached to the drive shaft. When there are more than one worm gear winches situated on one particular location, only one air motor is needed to drive them.

Gebuwin has two ranges of electrical winches. The EW range is constructed with a worm gear box as centre point between the electro- motor and the cable drum, whereas the EP range is always equipped with a planetary gear box as transmission. The winches are compact and have a robust construction. The EW range is available as 230V and 400V. The EP range is available only as 400V. All of the winches are equipped with maintenance free bearings. The winches are normally delivered as pulling winches but upon request, they can be delivered as hoisting winches. Most parts are made from steel and have been either painted or zinc plated. The coding is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment and the type of winch. The explanation for the coding is as follows: Type coding: EW = electrical winches with worm gear box EP = electrical winches with...

Gebuwin has two ranges of electrical winches. The EW range is constructed with a worm gear box as centre point between the electro- motor and the cable drum, whereas the EP range is always equipped with a planetary gear box as transmission. The winches are compact and have a robust construction. The EW range is available as 230V and 400V. The EP range is available only as 400V. All of the winches are equipped with maintenance free bearings. The winches are normally delivered as pulling winches but upon request, they can be delivered as hoisting winches. Most parts are made from steel and have been either painted or zinc plated. The coding is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment and the type of winch. The explanation for the coding is as follows: Type coding: EW = electrical winches with worm gear box EP = electrical winches with...

Gebuwin has two ranges of electrical winches. The EW range is constructed with a worm gear box as centre point between the electro- motor and the cable drum, whereas the EP range is always equipped with a planetary gear box as transmission. The winches are compact and have a robust construction. The EW range is available as 230V and 400V. The EP range is available only as 400V. All of the winches are equipped with maintenance free bearings. The winches are normally delivered as pulling winches but upon request, they can be delivered as hoisting winches. Most parts are made from steel and have been either painted or zinc plated. The coding is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment and the type of winch. The explanation for the coding is as follows: Type coding: EW = electrical winches with worm gear box EP = electrical winches with...