Wood chip transport - Import export

Screw conveyorsare used for transporting sawdust, wood chips, pellets and other bulk materials. Conveyor housing is made of structural steel with Magnelis® coating. Wormwheel is made of thick-walled steel pipe with 10 mm thick spiral welded to the pipe. End necks welded on both ends of the wormwheel are designed to be mounted in high-quality self-aligning ball bearings (SKF or INA/FAG) with UCF housing. Additionally, our screw conveyors are equipped with rotation monitoring sensors and inspection hatches with overflow sensors.Depending on the requirements and purpose belt conveyors could work with capacities from 15 m3/h to 100 m3/h. Screw conveyors (also known as auger feeders) are used in various industries, and their design can be adapted to the specifics of each industry, if necessary. The screw feeders we manufacture are part of the pellet production lineswe design and build, and ensure stable, even feeding of the raw material to the next production stage.

Heating technology with a future The calculation is simple, the technology successful. Efficient surface drying is achieved with biomass in Rippert plants. Together with the Hargassner company from Austria, a specialist for heating with biomass, and the proven Rippert plant know-how, the technology is now marketable and has gone into production. The demanding drying characteristics in a powder-coating plant are compatible with the process and work perfectly. A future-orientated heating technology with considerable economic and ecological benefits – the experts are unanimous in that. Wood pellets or wood chips are the inexpensive energy suppliers. They are valuable waste products that result from the processing of domestic timbers. Heating with wood chips – without intermediate heat transfer media such as thermal oil • Environmentally friendly and CO2-neutral • fully automatic boiler cleaning and ash discharge Maximum financial saving potentials are realised with this energy carrier. Wood chips, chopped to a transportable size and dried by the supplier, are stored in the storeroom near the plant. It can be located on the same level or lower. A tried-and tested transport system consisting of a floor agitator with springs and discharge auger carries the wood chips reliably into the plant. Here it acts as a fuel with maximum convenience. If the calorific value equivalents are examined, we see that 1,000 litres of fuel oil is equivalent to 12 m³ of wood chips. The ratio is the same for 1,000 m³ of natural gas. Heating with wood pellets - without intermediate heat transfer media such as thermal oil Wood pellets are true energy bundles. They consist of natural wood and are made by compressing sawdust, which is produced in large quantities every day in the industry. As a biomass they are the alternative to wood chips and are just as advantageous from an economical point of view. Pellets have the smallest volume and are conveyed dust-free and without odours from storage containers to a storage vessel next to the plant. They are transported into the combustion chamber via a rotary vane feeder and feed auger. For comparison: 1,000 l fuel oil = 2 t pellets 1,000 m³ natural gas = 2 t pellets 1,000 l liquefied gas = 1.32 t pellets Advantages • Reduction in energy costs Heating cost comparison (reference = 1,000 l fuel oil)

The planning and development of our systems are always made according to customer requirements. Whether in combination with container, drying equipment, conveyors, pellet production, saw mills, particle board / furniture industry or in other areas of application. Conveying vertical Low rotational speeds Standard execution Low noise Planning according to the customer

The planning and development of our systems are always made according to customer requirements. Whether in combination with container, drying equipment, conveyors, pellet production, saw mills, particle board / furniture industry or in other areas of application. Conveying vertical Low rotational speeds Standard execution Low noise Planning according to the customer

The planning and development of our systems are always made according to customer requirements. Whether in combination with container, drying equipment, conveyors, pellet production, saw mills, particle board / furniture industry or in other areas of application. Conveying vertical Low rotational speeds Standard execution Low noise Planning according to the customer

The planning and development of our systems are always made according to customer requirements. Whether in combination with container, drying equipment, conveyors, pellet production, saw mills, particle board / furniture industry or in other areas of application. Conveying vertical Low rotational speeds Standard execution Low noise Planning according to the customer

Pine Wood chips may be used as a biomass solid fuel and are raw material for producing wood pulp. They may also be used as an organic mulch in gardening, landscaping, restoration ecology, bioreactors for denitrification and as a substrate for mushroom cultivation.

Wood chips size about 45mm = 5% Air Dry Weight or less Wood chips size of 9.5mm – 45mm = 75% Air Dry Weight or more Wood chips size of 4.8mm-9.5mm = 13% Air Dry Weight or less Wood chips size below 4.8 mm = 4% Air Dry Weight or less Bark & rot = 3% Air Dry Weight or less Wood chips different for as maximum of ± 10%

High-quality waste products (By-products) from our plywood production! With our extensive range of waste products, you can conserve resources while benefiting from high-quality wood materials. Birch-chips

RUF sawdust briquettes are the perfect solution for efficient and eco-friendly heating. These high-density blocks are made from compressed birch clean sawdust, offering a high heat output and a long, steady burn. With low moisture content and minimal ash residue, they are ideal for wood-burning stoves, boilers, and open fires. Enjoy a cleaner, more sustainable burn with our RUF sawdust briquettes.

Bothnia Wood manufactures and sells about 6000 cubic meters of wood chips. Wood Chips are sourced in accordance with PEFC guidelines and are classified as a sustainable biomass resource. Rotary dry processing is used to control moisture and eliminate contaminants, resulting in a clean and safe product. Sizes and Specifications available for shipment: Size: 5mm-50mm Overs: ≤5% >50mm Fines: ≤3% <5mm Bark: ≤2% Moisture: Annual average is 45-55%

Product name Wood Chips Bulk Package Bulk Size 9.5-40mm 70% Weight 12.3 0.5g Length 25cm 33cm 50 Cm Moisture Max 15% Diameter 5cm-15cm MOQ 27mt Packaging Big Vessel ASH(%) 3.1 - 3.5%

With humimeter BLL wood chip moisture meter you can easily determine the water content of your material within few seconds. The measuring values can be stored on the humimeter BLL wood chip moisture meter and optionally printed out at an external printer or sent to a PC if required. + very easy handling + measurement within seconds + determination of water content also in deeper layers + datalog function + USB interface and printer (optional) Handling / measuring procedure Switch on the humimeter BLL wood chip moisture meter and select the right calibration curve. Insert the measuring probe of the humimeter BLL wood chip moisture meter straightly into the wood chips pile. The water content is instantly displayed on the humimeter BLL wood chip moisture meter and can be saved if required. This way a lot of measurements can be done within a short period of time. The humimeter BLL wood chip moisture meter determines an average value automatically.