CBG COMPOSITES GMBH

Low-viscosity, water based, one-component non-combustible adhesive with endothermic effect, made of natural components, mainly rock formations and basalt microfiber. Cerammatrix 01-50 is used to bond products made of mineral fibers (basalt, carbon, glass) as well as mineral wool and/or metals. — 100% natural origin — inorganic and antibacterial — non-combustible — no smoke or fuses in case of fire — high temperature resistant (after drying) — safe for people and environment — high adhesive properties — moisture-resistant — water resistant after special treatment of the finished product

fako® Glass fibre adhesive 9119Xtra is a solvent-free plastic dispersion adhesive, which is characterized by high elasticity and initial adhesion, a thixotropic one-component adhesive with short drying time. fako® glass fibre adhesive no. 9119XTRA complies with the requirements of IMO FTPC part 5 for low flammability, and is affixed with the «Wheelmark» (mark of conformity), the European regulatory marking of all marine equipment, as defined in the Marine Equipment Directive (IMO/MED). Application area: in shipbuilding for "A", "B" and "F" class divisions. Purpose: bonding of glass fabric to mineral wool in pipe and surface areas, bonding to sheet metal, as well as for production of glass fiber fabric cover on rubber products (e.g. Armaflex). It can be used on all load-bearing surfaces, such as plaster, plasterboard and concrete.

fako® cleaning and polishing milk no. 9322 is a maintenance agent at your disposal that especially meets the demands of Plexiglass and other acrylic glasses, plastics as well as gel coat finish and fiberglass. It is used for regular care, removal of marks, dirt and minor scratches, oxidation, yellowing and chalking, gives plastics optimum protection with dust-repellent properties and preserves their natural brilliance. Matt panes become radiantly clear again. Maintenance is simple and straight forward with excellent results. The use of fako® Polishing milk does not lead to stress-corrosion cracking.

fako® Sealing putty 3765, made of butylrubber, has been developed as a supplement to the fako® Sealing strip 3714, for most sealing purposes where absolute resistance to ageing is required and for which an intermediate layer of 0.8 mm to 1 mm has to be used. In combination with the Sealing strip 3714 most desired thickness’s can be obtained for seals. The putty does not become hard but remains plastic and elastic. To fulfil its requirements the putty has not only to be elastic but also plastic so that, when pressed, it will penetrate into any gaps and remain, thus forming a complete seal. Technically this is only possible through a combination of two basic materials with the same chemical composition but with different molecular weights. With two components the above requirement is met for both sufficient penetration depth and stability of the kit at the same time. By simple filling with a putty knife, you can obtain a min. thickness of approx. 0.2 to 0.3 mm. Priming is not required.

Our care products specially developed for Plexiglas help you to maintain the beauty and value of the material for years and decades. In comparison to silicate glass, two properties must be taken into particular consideration when caring for and cleaning acrylic glass. On the one hand the lower surface hardness and therefore higher susceptibility to scratches of acrylic glass, on the other hand the susceptibility of acrylic glass to solvents, especially organic ones. The use of incompatible polishing materials can cause stress cracks and matt surfaces. With fakopol® a care product is available, which is specially developed for the properties of Plexiglas, other acrylic glass and plastics. It has both cleaning and polishing action, removes wipe scratches and marks and is ideal for finishing of industrially manufactured parts. Gives long-lasting protection and glossy deep shine. The treatment process is quite simple.

With fako® Polishing paste No.9311 a care product is available, which is specially developed for the properties of Plexiglas, other acrylic glass and plastics. Polishes deep scratches and scrapes. Matt surfaces become clear again, scratches and scrapes are removed. Unsightly panes become flawless again! The treatment process is quite simple. Clean dirty surfaces with clear lukewarm water and a clean, soft viscose sponge until adhering dirt is removed. Put some fako® Polishing paste No. 9311 with lint-free fako® special polishing cloth on the moistened surface and polish under pressure in circular movements until the surface is dry. Polish to a gloss with another dry fako® special polishing cloth until the residues are removed and the surface is dry and clear. When removing deep scratches, the polishing process may cause matt spots. In this case we recommend an after-treatment with fako® Polishing milk No.9322.

Anti-corrosion flexible one-sided self-adhesive butyl sealing strip, made of highly elastic, synthetic rubber (butyl) of soft rubber-like texture. It adheres reliably without heating. The butyl sealing strip is driven apart by the contact pressure, but due to its elasticity and plastic properties it penetrates into the smallest joints and unevenness and thus provides an optimum sealing. It can be drawn out to wafer-thin films by hand. Even high contact pressure level is not able to destroy the film. Non-ageing, UV-resistant, watertight, non-shrink, tight towards water vapour, seawater resistant. A sealant between metal, wood, plastics, organic glass and silicate glass with and among each other. It seals rivet and screw joints, flanged and folded connections. Sealing between metals prevents galvanic /electrolytical corrosion. Does not corrode Plexiglas, metal, wood, oil- and synthetic resin paints and does not contain any corroding ingredients.

Thermal insulating needle mats (blankets) made of biosoluble ceramic fibres based on calcium and magnesium silicates with high thermal insulation values at all operating temperatures, usable as an insulating and working layer of high-temperature equipment and for the production of thermal insulation products in the form of modules or panels. Available in two densities of 96 kg/m³ and 128 kg/m³. Thanks to its biosolubility, it can be easily disposed of without harming the environment. — 100% biosoluble — good tear resistance — high temperature resistance — high flexibility — low thermal conductivity — easy processing — good sound absorption — environmentally friendly — good insulating properties — harmless to health — high chemical resistance* — contains no binders, produces no vapours or air pollution * to achieve higher acid resistance, a special coating is required. Available from manufacturer.

Heat-insulating refractory modules made of biosoluble ceramic fibres based on calcium and magnesium silicates with high thermal insulation values at operating temperatures up to 1,200°C, usable as an insulating and working layer of high-temperature equipment of any construction and type of application with the air velocity < 40 m/s. Available in two densities of 200 kg/m³ and 250 kg/m³. Easy to dispose of without harming the environment thanks to its fibre biosolubility. — 100% biosoluble — high temperature resistance* * with additional CBG special fibre coating up to 1.350°C — low thermal conductivity — good sound absorption — good insulating properties — chemically resistant to acids, alkalis, oil, hydrocarbons and water — good strength — low installation effort — reduced maintenance — environmentally friendly — harmless to one's health — contains no binders, produces no vapours or air pollution

High-temperature vacuum-formed products made from biosoluble ceramic fibres are lightweight and strong parts or structural elements that can be used at temperatures up to 1 .600 °C in air and in aggressive environments, including direct contact with liquid metals. — 100% natural — biosoluble — high thermal shock resistance — low thermal conductivity — high chemical resistance * — recyclable — low weight — good tear resistance — high flexibility — easy processing — harmless to health — complicated geometries can be produced * A special coating is required to achieve high acid resistance. Available from manufacturer. Fields of application: gaskets, crucibles, thermocouple housings, coupling devices in continuous casting plants, expansion joints, convex and flat gaskets in blast furnaces, channel elements of metal troughs, inlet device in the melting of non-ferrous and ferrous metals.