Germany
Manufacturer/ Producer
Germany
High-temperature vacuum-formed products made from biosoluble ceramic fibres are lightweight and solid parts or structural elements that can be used at temperatures up to 1.400 °C in air and in aggressive environments, including direct contact with liquid metals. — 100% biosoluble — high temperature resistance — low thermal conductivity — high chemical resistance * — low weight — good tear resistance — high flexibility — easy processing — complicated geometries can be produced — recyclable * to achieve higher acid resistance, a special coating is required. Available from manufacturer. Application: Burner plant components, crucibles, thermocouple housings, coupling devices in continuous casting plants, channel elements of metal troughs, inlet device in the melting of non-ferrous and ferrous metals, gasket in aluminium foundries, gaskets in blast furnaces, expansion joints, pipe insulation, catalyst insulation, repair work in the high temperature range.
Request for a quoteGermany
CBG DP-TA - dense shotcrete with high grinding resistance for cold and hot repairs of thermal equipment with a maximum application temperature up to 1500°C. It can be used as shotcrete and repair compound for other equipment after consultation with the manufacturer. — high abrasion resistance — high adhesion strength with the surface to be applied — does not contain substances that cause allergic reactions. Resistant to molten metals, acid and alkaline slags. The water temperature by mixing the concrete mix must not exceed +35°. Delivery and storage conditions: — Packed in 25 kg bags or big bags, other packaging possible by agreement. — Shelf life in a dry room: max. 12 months from date of production.
Request for a quoteGermany
CBG-DP-82 is a dense fireproof concrete intended for monolithic lining of high-temperature equipment, especially lids of steel casting ladles, lids of intermediate ladles, reinforcing and working layers of steelworks equipment, as well as for the production of monolithic products operating at temperatures up to 1 .750°C. — high temperature resistance — high temperature at the onset of deformation under load — high mechanical resistance — does not contain substances causing allergic reactions.
Request for a quoteGermany
CBG-DP-90 is a dense, refractory, self-flowing concrete with low cement content intended for use in aggressive environments, including contact with molten metals and slags at temperatures up to 1,900°C, especially for the production of monolithic linings of steel ladles, elements of the metal tract and as a repair concrete mass. It can be used for monolithic linings as well as for products of any configuration and complexity. — high temperature resistance — high temperature of liquid phase formation — high mechanical strength — high temperature of onset of deformation under load — does not contain substances that cause allergic reactions — resistant to molten metal, acid and alkaline slags Main application: ferrous, non-ferrous and glass industry, lining of melting aggregates in the production of mineral fibres etc.
Request for a quoteManufacturer/ Producer
Egerpohl 2
51688 Wipperfürth - Germany
Greece
The plaster support grid is used as a reinforcement for cement mortars, coatings, plasters, etc.
Request for a quoteGermany
High performance, environmentally friendly silicate mortar for sewage water areas. Extreme resistance against chemicals in the range of pH 0 – 14. Maleki-SBS 860 is ideal for protecting mineral surfaces against corrosive influences. Both existing and new concrete surfaces can be protected for longer against stresses that occur. The material is an ideal supplement for work in higher layer thicknesses and can be used in combination with Maleki-SWP 270. Packaging unit: 15 kg bucket with 3x 5 kg LDPE bags (360 kg / pallet), 5 kg LDPE bags in a pallet carton (500 kg / pallet) – Article-No.: 1520
Request for a quoteTurkey
DOĞAL TAŞTAN HAFİF ,RENK SOLMAZLIK GARANTİLİ ,UYGULAMASASI HIZLI VE SEVKİYATI BASİTTİR. HER KUTU 1 M2 1 PALET 36 M2 1 M2 25 KG 1.00 X 1.20 X 1.20 PALET ÖLÇÜLERİ İLE YÜKLEMELER ANKARA FABRİKA ALANINDAN YAPILMAKTADIR. PROJELERİN VAZGEÇİLMEZ MALZEMESİ OLARAK ONA ÇIKAN TAŞ SERİLERİNİN DETAYLARI İÇİN LÜTFEN İNTERNET SİTEMİZİ ZİYARET EDİN. DETAYLI BİLGİ İÇİN İLETİŞİM KISMANDA BULUNAN MAİL ADRESLERİ İLE TEMASA GEÇEBİLİRSİNİZ.
Request for a quoteGermany
Versatile silicate sealant for mineral wall and floor surfaces. Ideal for polished substrates. The material only forms very thin layers which does not affect the look and feel of high-quality mineral surfaces like Terrazzo floors. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 5 kg canister (300 kg / pallet), 30 kg canister (540 kg / pallet), 1000 kg IBC – Article-No.: 1811
Request for a quoteCreate one request and get multiple quotes form verified suppliers.