OMEGA AIR

SF stainless steel sterile filters are designed for high-efficient sterile filtration of compressed air, process air and technical gasses. SF sterile filters provide high-efficient removal of sub-micron particles down to 0,01μm including microorganisms (bacteria). Filter housing surface is polished down to grade Ra0,8. Required compressed air quality according to standard ISO 8571-1 can be achieved with appropriate filter element. All components meet the FDA requirements for contact with food in accordance with the Code of Federal Regulations (CFR), title 21. Fluid group 1 on request.

HPF process filters are designed for high pressure applications in process industry, where the risk for corrosion of compressed air system components is very high. Required compressed air quality according to standard ISO 8571-1 can be achieved with 9 different grades of filter elements. HPF process filter housing can be used in variety of applications. For applications not listed please contact us or your local distributor. For oil removal, coalescing filter element must be installed and flow direction inside-out must be provided. General arrangement is bowl on the top and filter head on the bottom. Fluid group 1 on request.

We are producing replacement filter elements according to ISO 8573-1. Alternative filters are tested by IUTA. Discover our range of replacement filters: ABAC, AGRE, AIRFILTER ENGINEERING, ALMIG, ALUP, ATLAS COPCO, ATS, BALMA, BEA, BEKO, BOGE, CECCATO, CHAUMECA, CHICAGO PNEUMATIC, CKD, COMPAIR, CTA, DELTECH, DOMNICK HUNTER, DONALDSON, EKOMAK, FIAC, FINITE, FUSHENG, HANKISON, HIROSS, HITACHI, INGERSOLL RAND, KAESER, KNOCKS, KOBELCO, KSI, MARK, MATTEI, MAUGUIERE, MIKROPOR, OMI, ORION, PNEUMATECH, PREVOST, PUSKA, SCHNEIDER, SMC, SPX NGF, SULLAIR, WALKER, WORTHINGTON CREYSSENSAC, ZANDER, ZONDER.

Pressure drop indicator PDI 16 is designed to indicate pressure drop across the filter element in compressed air system. It detects when the filter cartridge is clogged and should be replaced. PDI 16 is typically installed on the head of the filter housing. PDI 16 can be used in variety of applications.

Magnetic differential manometer MDM 40 is designed to indicate pressure drop across the filter element in compressed air system. For any other technical gas please contact us or your local distributor. It detects when the filter cartridge is clogged and should be replaced. MDM 40 is typically installed on the head of the filter housing. MDM40 can be used in variety of applications.

Magnetic differential manometer MDH400 is designed to indicate pressure drop across the filter element in compressed air system. It detects when the filter cartridge is clogged and should be replaced. MDH400 is usually installed on the head of the filter housing. Double dials on manometer allows readout values from both sides of the differential manometer. Thanks to resistance stainless steel housing is also suitable for demanding applications.

Electronic condensate drains EMD series is designed for fully automatic discharging of condensate or any other non-aggressive fluid from compressed air system. The units can be installed as external drain on any application specified. Condensate accumulates in the collecting reservoir. When the level is high enough condensate is being discharged from the system without any air losses. Fluid level is detected by precise capacitive level sensor. Special self-cleaning direct acting valve assures reliable operation. Electronic condensate drains - EMD series is also equipped with operation alarm, led indicator, test button and internal strainer. Version with Service Network for diagnostics parameter setting and alarm output is also available.

IED drain series is designed for fully automatic discharging of condensate or any other non-aggressive fluid from compressed air system. The series is designed to discharge condensed water from filter housing primarily. Condensate accumulates in the bottom of filter housing. Fluid level is detected by precise capacitive level sensor. When the level is high enough condensate is being discharged from the system without any air losses. IED drain series is also equipped with led indicator and test button.

TD M timer controlled condensate drain is designed for reliable removal of condensate or other liquid from compressed air system. Discharge intervals can be set with two adjustment knobs. TD M drain is available in several types based on operating pressure and operating medium. TD M can be used in variety of applications. For applications not listed please contact us or your local dealer.

AOK16B is designed for fully automatic discharging of condensate or any other non aggressive fluid from compressed air system. For any other technical gas please contact us or your local distributor. AOK16B is easy to install inside to the filter housing. AOK16B can be used in a variety of applications. For applications not listed please contact us or your local distributor.