Infrared tubes - Import export

ICH-400 series infrared quartz heaters are used in industrial and commercial heating systems where instant heat response is required: thermoforming, drying chambers, infrared tunnels and panels, heating and drying conveyors, and other infrared systems. These emitters are essential tools for the processes that need an immediate heat-up and cool down, where the product could be damaged because of a heater remaining too hot after the power is cut off. Maximun temperature 730°C. EUROLINIA quartz heating elements are hand-made using the best available components to bring you excellent performance and service life of up to 8000 hours of non-stop operation.Comply with all international standards and are interchangeable with all known brands (FQE/HQE/QQE/SQE)

QSun-C Ceiling Mounted Infrared Heater is adapted for installation to the "ARMSTRONG" type suspended ceiling grid or can be mounted at any height above the floor level using the included mounts. QSun-C saves your room space and electricity costs by delivering sun-like warmth directly to the people without heating the surrounding air, and not disturbing dust. Only 15 mm thick ceiling heating panels look elegant and aesthetically pleasing, seamlessly blending into any interior. Effective heating area - 8-12 m².

EUROLINIA offers custom designed control systems from small single heater controls to large multi-zone systems for reliable, economical, and efficient heater performance to ensure precise process temperature control. Some clients, in order to cut costs, underestimate the importance of using appropriate control systems and, as a result, cannot get effective uniform heating and desired quality of the final product. When we develop a control unit for our infrared heating system – we guarantee that the final product will meet all requirements and expectations.

EUROLINIA infrared industrial tunnel ovens are designed to rapidly and uniformly heat the surface of cables, wires, polymer pipes and tubes, dry fiber optics and etc. in batch or continuous conveyor production using targeted high-intensity infrared radiation. High efficiency is achieved by concentrating high-intensity infrared radiation and by using a circular reflector that efficiently distributes radiant energy inside the heating chamber. Additional efficiency is gained by installing three-level thermal protection. EUROLINIA tunnels have modular structure: one heating section is 2 meters long, you can connect up to 8 sections in one production line. Maxumum temperarature in the tunnel can reach up to 700C. Tunnels can have multiple separate heating zones and can be equiped with a conveyor. To ensure high-quality, high-precision surface heating, industrial tunnel ovens are also equipped with an automatic heating control system (APCS).

All EUROLINIA infrared panels are manufactured according to the client’s application and include high precision control systems to perfectly match the required production process. They feature extremely high reliability and durability, resistant to corrosion, high humidity, and condensation; dust, pollution, and most chemical compounds resistant. Infrared panel is usually divided into several operating zones. The heating intensity of each zone is automatically adjusted based on the data received from the thermal sensors located inside the ceramic emitters equipped with a thermocouple. This ensures compensation of heat losses at the edges of the product and helps to avoid overheating in the center. All infrared panels are assembled at our facility from scratch to the final product. We run multiple tests to make sure they are 100% in line with all the requirements and expectations. Our clients are welcome to attend such tests.

EUROLINIA Industrial Infrared Ovens are designed for high-precision surface heating of various materials and products by directional infrared heat. Precise temperature control, sperate heating zones, custom software for your application. Optionally ovens can be equipped with protective steel curtains for instant heating termination or inertia-free start/stop system. Maximum temperature of the infrared ceramic emitters is 750 °C. Maximum temperature inside the oven is 450°C. Maximum power density on the surface of the heated product up to 30 kW/m2. 380V.

Ceramic Force EIP-2 (380V) infrared heaters for industrial use are designed for indoor and outdoor heating applications to deliver maximum performance and cover large spaces. They do an excellent job at factories, warehouses, workshops, stadiums, big garages and pavilions. 3 models are available with wattages: 5850, 7200 and 9000W. This power is enough to cover 40-100m2 depending on thermal insulation and surrounding temperature. Parabolic arrangement of infrared emitter rows allows you to create a heating zone with a volumetric 55-95 degrees angle. Thus, minimizing energy losses from heat dissipation outside the zone of directed infrared rays. EIP Heating panels can be mounted on a wall or a ceiling. Radiating surface angle can be set from 0 to 60 degrees. Each electric heater has a thermal sensor connected to a three-phase electric power thermostat, which controls the heating process according to the preset temperature.

Ceramic Force EIP-1 (380V) infrared heaters for industrial use are designed for indoor and outdoor heating applications to deliver maximum performance and cover large spaces. They do an excellent job at factories, warehouses, workshops, stadiums, big garages and pavilions. 3 models are available with wattages: 3900, 4800 and 6000W. This power is enough to cover 20-60m2 depending on thermal insulation and surrounding temperature. Parabolic arrangement of infrared emitter rows allows you to create a heating zone with a volumetric 55-95 degrees angle. Thus, minimizing energy losses from heat dissipation outside the zone of directed infrared rays. EIP Heating panels can be mounted on a wall or a ceiling. Radiating surface angle can be set from 0 to 60 degrees. Each electric heater has a thermal sensor connected to a three-phase electric power thermostat, which controls the heating process according to the preset temperature.

QSun-M3 (2400W) is the most powerful heater in ceramic M-series, it can cover up to 10-20m2 depending on the insulation level. When it comes to heating open spaces like summer cafes, garages or warehouses you can’t find anything better than targeted infrared heating. Common convection systems rely on generating hot air currents and usually ridiculously ineffective because the heat is simply lost through poor insulation. QSun-M doesn’t have this problem because all the heat is going directly from the heater to the end user without losing energy for warming the entire place. For QSun-M series we use black (ICH) ceramic heating elements of our own production. These elements are very reliable and durable with practically no visible light during operation. ICH long-wave emitters produce soft and gentle heat that feels very close to the biggest infrared heater that we know - the Sun!

QSun-A2 (1600W) is good for 8-15m2 depending on the insulation level. Equipped with a remote control. When it comes to heating open spaces like summer cafes, garages or warehouses you can’t find anything better than targeted infrared heating. Common convection systems rely on generating hot air currents and usually ridiculously ineffective because the heat is simply lost through poor insulation. QSun-M doesn’t have this problem because all the heat is going directly from the heater to the end user without losing energy for warming the entire place. For QSun-M series we use black (ICH) ceramic heating elements of our own production. These elements are very reliable and durable with practically no visible light during operation. ICH long-wave emitters produce soft and gentle heat that feels very close to the biggest infrared heater that we know - the Sun!

QSun-A1 (800W) is good for 5-12m2 depending on the insulation level. Equipped with a remote control. When it comes to heating open spaces like summer cafes, garages or warehouses you can’t find anything better than targeted infrared heating. Common convection systems rely on generating hot air currents and usually ridiculously ineffective because the heat is simply lost through poor insulation. QSun-M doesn’t have this problem because all the heat is going directly from the heater to the end user without losing energy for warming the entire place. For QSun-M series we use black (ICH) ceramic heating elements of our own production. These elements are very reliable and durable with practically no visible light during operation. ICH long-wave emitters produce soft and gentle heat that feels very close to the biggest infrared heater that we know - the Sun!

QSun-M3 (2400W) is the most powerful heater in ceramic M-series, it can cover up to 10-20m2 depending on the insulation level. When it comes to heating open spaces like summer cafes, garages or warehouses you can’t find anything better than targeted infrared heating. Common convection systems rely on generating hot air currents and usually ridiculously ineffective because the heat is simply lost through poor insulation. QSun-M doesn’t have this problem because all the heat is going directly from the heater to the end user without losing energy for warming the entire place. For QSun-M series we use black (ICH) ceramic heating elements of our own production. These elements are very reliable and durable with practically no visible light during operation. ICH long-wave emitters produce soft and gentle heat that feels very close to the biggest infrared heater that we know - the Sun!

QSun-M2 (1600W) is good for 8-15m2 depending on the insulation level. When it comes to heating open spaces like summer cafes, garages or warehouses you can’t find anything better than targeted infrared heating. Common convection systems rely on generating hot air currents and usually ridiculously ineffective because the heat is simply lost through poor insulation. QSun-M doesn’t have this problem because all the heat is going directly from the heater to the end user without losing energy for warming the entire place. For QSun-M series we use black (ICH) ceramic heating elements of our own production. These elements are very reliable and durable with practically no visible light during operation. ICH long-wave emitters produce soft and gentle heat that feels very close to the biggest infrared heater that we know - the Sun!

QSun-M1 (800W) is good for 5-12m2 depending on the insulation level. When it comes to heating open spaces like summer cafes, garages or warehouses you can’t find anything better than targeted infrared heating. Common convection systems rely on generating hot air currents and usually ridiculously ineffective because the heat is simply lost through poor insulation. QSun-M doesn’t have this problem because all the heat is going directly from the heater to the end user without losing energy for warming the entire place. For QSun-M series we use black (ICH) ceramic heating elements of our own production. These elements are very reliable and durable with practically no visible light during operation. ICH long-wave emitters produce soft and gentle heat that feels very close to the biggest infrared heater that we know - the Sun!

Made of high-alumina chamotte containing 65 to 72% Aluminum oxide. Sintered high-alumina ceramics' high thermal conductivity allows obtaining the most uniform temperature across the radiation surface, providing uniform and high-quality radiant heating. These elements are often used in thermoforming machines, drying chambers, infrared tunnels and panels, heating and drying equipment, and various commercial heaters. Estimated service life at least 8,000 - 10,000 hours of non-stop operation. Maximun temperature 750°C. Comply with all international standards and are interchangeable with all known brands (FTE/FSR/FSF/HTC/HTE).

Plinth Infrared Heaters feature stylish design, they are slim, but you’ll be surprised by the amount of warmth they can generate! Designed to be mounted at the bottom of the wall, just above the floor, which makes them barely visible. Made of powder-coated sheet metal, it has a very lightweight (2kg) and very slim design (15 mm thick). If you need more heat in the room, multiple plinth heating panels can be connected in a parallel chain (up to 15 heaters in one chain). For this purpose, a terminal block is provided on the rear side of the heater. Key Advantages include: don’t burn oxygen, have zero maintenance fee, save up to 40% energy compared to other models, quickly warms up surrounding objects, silent during operation, don't blow dust, pollen, or other allergens. Effective heating area is 3-5 m².

QSun-W 660W is easy to install on a wall or any other vertical surface using only 4 screws. Effective heating area - 10-18 m² depending on the heat insulation of the room. Customize your QSun-W panel with a graphic design of your choice. Wall mounted infrared heating panels QSun-W are proven to have one of the highest efficiency rates reducing heating costs. Clean Dust Free Heat - unlike forced-air systems, infrared heating panels don't blow dust, pollen, hair, or other allergens. We recommend installing the QSun-W on the walls in places where there are no obstacles to the spread of infrared heating rays (tables, chairs, etc.) at a height of at least 100 mm from the floor. It is recommended to install this heater under the window. In this case, it will also perform the function of a "heat curtain" and prevent the penetration of cold air through the window into the room.

InfraLine-200 series heaters are equipped with a special polished stainless-steel reflector with higher thermal insulation for maximum heat output, reduces sideways heat dispersion, and produces an even spread of heat at approximately 90°. InfraLine heaters may consist of up to 3 ceramic infrared heating elements ranging from 250 to 1,000 Watts for each element. Maximum temperature up to 700°C. Setup and maintenance of the InfraLine heaters is very simple and straightforward. You can install them almost on any surface and precisely direct them to the desired heating area. InfraLine heaters can be grouped in sets and equipped with a control system.

InfraLine-200 series heaters are equipped with a special polished stainless-steel reflector with higher thermal insulation for maximum heat output, reduces sideways heat dispersion, and produces an even spread of heat at approximately 90°. InfraLine heaters may consist of up to 3 ceramic infrared heating elements ranging from 250 to 1,000 Watts for each element. Maximum temperature up to 700°C. Setup and maintenance of the InfraLine heaters is very simple and straightforward. You can install them almost on any surface and precisely direct them to the desired heating area. InfraLine heaters can be grouped in sets and equipped with a control system.

InfraLine-200 series heaters are equipped with a special polished stainless-steel reflector with higher thermal insulation for maximum heat output, reduces sideways heat dispersion, and produces an even spread of heat at approximately 90°. InfraLine heaters may consist of up to 3 ceramic infrared heating elements ranging from 250 to 1,000 Watts for each element. Maximum temperature up to 700°C. Setup and maintenance of the InfraLine heaters is very simple and straightforward. You can install them almost on any surface and precisely direct them to the desired heating area. InfraLine heaters can be grouped in sets and equipped with a control system.

InfraLine-100 series heaters are equipped with polished stainless-steel reflector that increases the heat output, reduces sideways heat dispersion, and produces an even spread of heat at approximately 90°. InfraLine heaters may consist of up to 3 ceramic infrared heating elements ranging from 250 to 1,000 Watts for each element. Maximum temperature up to 600°C. Setup and maintenance of the InfraLine heaters is very simple and straightforward. You can install them almost on any surface and precisely direct them to the desired heating area. InfraLine heaters can be grouped in sets and equipped with a control system.

InfraLine-100 series heaters are equipped with polished stainless-steel reflector that increases the heat output, reduces sideways heat dispersion, and produces an even spread of heat at approximately 90°. InfraLine heaters may consist of up to 3 ceramic infrared heating elements ranging from 250 to 1,000 Watts for each element. Maximum temperature up to 600°C. Setup and maintenance of the InfraLine heaters is very simple and straightforward. You can install them almost on any surface and precisely direct them to the desired heating area. InfraLine heaters can be grouped in sets and equipped with a control system.

InfraLine-100 series heaters are equipped with polished stainless-steel reflector that increases the heat output, reduces sideways heat dispersion, and produces an even spread of heat at approximately 90°. InfraLine heaters may consist of up to 3 ceramic infrared heating elements ranging from 250 to 1,000 Watts for each element. Maximum temperature up to 600°C. Setup and maintenance of the InfraLine heaters is very simple and straightforward. You can install them almost on any surface and precisely direct them to the desired heating area. InfraLine heaters can be grouped in sets and equipped with a control system.

ICH-400 series infrared quartz heaters are used in industrial and commercial heating systems where instant heat response is required: thermoforming, drying chambers, infrared tunnels and panels, heating and drying conveyors, and other infrared systems. These emitters are essential tools for the processes that need an immediate heat-up and cool down, where the product could be damaged because of a heater remaining too hot after the power is cut off. Maximun temperature 730°C. EUROLINIA quartz heating elements are hand-made using the best available components to bring you excellent performance and service life of up to 8000 hours of non-stop operation.Comply with all international standards and are interchangeable with all known brands (FQE/HQE/QQE/SQE)

ICH-400 series infrared quartz heaters are used in industrial and commercial heating systems where instant heat response is required: thermoforming, drying chambers, infrared tunnels and panels, heating and drying conveyors, and other infrared systems. These emitters are essential tools for the processes that need an immediate heat-up and cool down, where the product could be damaged because of a heater remaining too hot after the power is cut off. Maximun temperature 730°C. EUROLINIA quartz heating elements are hand-made using the best available components to bring you excellent performance and service life of up to 8000 hours of non-stop operation.Comply with all international standards and are interchangeable with all known brands (FQE/HQE/QQE/SQE)

ICH-400 series infrared quartz heaters are used in industrial and commercial heating systems where instant heat response is required: thermoforming, drying chambers, infrared tunnels and panels, heating and drying conveyors, and other infrared systems. These emitters are essential tools for the processes that need an immediate heat-up and cool down, where the product could be damaged because of a heater remaining too hot after the power is cut off. Maximun temperature 730°C. EUROLINIA quartz heating elements are hand-made using the best available components to bring you excellent performance and service life of up to 8000 hours of non-stop operation.Comply with all international standards and are interchangeable with all known brands (FQE/HQE/QQE/SQE)

Made of high-alumina chamotte containing 65 to 72% Aluminum oxide. Sintered high-alumina ceramics' high thermal conductivity allows obtaining the most uniform temperature across the radiation surface, providing uniform and high-quality radiant heating. These elements are often used in thermoforming machines, drying chambers, infrared tunnels and panels, heating and drying equipment, and various commercial heaters. Estimated service life at least 8,000 - 10,000 hours of non-stop operation. Maximun temperature 750°C. Comply with all international standards and are interchangeable with all known brands (FTE/FSR/FSF/HTC/HTE).

Made of high-alumina chamotte containing 65 to 72% Aluminum oxide. Sintered high-alumina ceramics' high thermal conductivity allows obtaining the most uniform temperature across the radiation surface, providing uniform and high-quality radiant heating. These elements are often used in thermoforming machines, drying chambers, infrared tunnels and panels, heating and drying equipment, and various commercial heaters. Estimated service life at least 8,000 - 10,000 hours of non-stop operation. Maximun temperature 750°C. Comply with all international standards and are interchangeable with all known brands (FTE/FSR/FSF/HTC/HTE).

Made of high-alumina chamotte containing 65 to 72% Aluminum oxide. Sintered high-alumina ceramics' high thermal conductivity allows obtaining the most uniform temperature across the radiation surface, providing uniform and high-quality radiant heating. These elements are often used in thermoforming machines, drying chambers, infrared tunnels and panels, heating and drying equipment, and various commercial heaters. Estimated service life at least 8,000 - 10,000 hours of non-stop operation. Maximun temperature 750°C. Comply with all international standards and are interchangeable with all known brands (FTE/FSR/FSF/HTC/HTE).