Glass fibres - Import export

Special SiO 2> glass fibres that withstand high temperatures are the basic material for these products. Their characteristic properties are low thermal conductivity, minimum heat storage and absolute incombustibility. isoTHERM® ST does not irritate the skin, is absolutely harmless to health and has excellent chemical resistance properties. Available dimensions: 3 - 30 mm.

TEXTALU® E is a thin wall glass fibre braid made of glass fibres with heat-reflecting aluminium coating. Its reflecting surface guarantees that the protective sleeve made of this high-performance material maintains a nearly constant interior temperature even under strongly fluctuating ambient temperatures. This non-ductile braid sleeve is ideal for protecting lines, cables and cable sets against radiation heat.

Special SiO 2> glass fibres that withstand high temperatures are the basic material for these products. Their characteristic properties are low thermal conductivity, minimum heat storage and absolute incombustibility. isoTHERM® ST does not irritate the skin, is absolutely harmless to health and has excellent chemical resistance properties. Available dimensions: width: 8 - 120 mm, thickness: 0,2 - 10 mm.

FFP2 Face Mask in white or black: Made in Germany in top quality. Features of the FFP2 mask Reliable self and respiratory protection (!) German origin "MADE IN GERMANY", production in Germany with materials from Germany Enormous filter performance, over >98 % according to test criteria of EN149:2001+A1:2009 Optimal breathing comfort - low breathing resistance, no shortness of breath, no difficult inhalation or exhalation Meets the requirements of the Personal Protective Equipment Regulation (EU) No. 2016/425 CE certified according to EU standard EN149-2001+A1:2009 Shelf life is 3 years from production date Free of harmful substances and glass fibres,

The basic material for isoTHERM® 1000 - Tapes is produced by a chemical refinement process. The components that melt at a low temperature are eliminated from E-glass fibres in this process, so that the temperature resistance level is increased. The products can be identified by their light blue colour. isoTHERM® 1000 has extremely textile properties, does not irritate the skin at all and is classified as absolutely harmless to health. Available dimension: width: 8 - 120 mm, thickness: 2 - 10 mm.

A ViTEQ Loss-in-Weight Feeders are designed to ensure a continuous, gravimetric and high tolerance batch dosing of flowable bulk materials that are not hygroscopic, adhesive or interleaving features. The feeders are sSuitable for many bulk materials including those with the following characteristics: fragile (food products) abrasive (coarse powder, pellets, granulate) difficult to handle (like fibres, glass fibres, pharmaceutical powders) Suitable for wherever precise dosing and weighing of the main components and additives is necessary. Ideal in the following industries: Food & Animal Feed Plastics / Chemicals Pharmaceuticals Advantages & benefits less shear and pressure forces Troughs have a dead space-free design quick and easy cleaning, maintenance-free vibration discharge very gentle weighing (volumetric and gravimetric) highly precise dosing high throughputs Construction Technical data WLW-L WLW-M WLW-H Trough length (mm) 275 - 1.100 275 - 1.100 275 - 1.100 Trough wi

  S-Ply® is a glass-fibre composite material that is suitable for the highest dynamic requirements. The load carrying and supporting material is a strictly parallel-orientated, non-woven, glass- or carbon-fibre laminate (UD-prepregnated).     The glass-fibres are not stretched and not bent. In contrast to metallic materials with an isotropic structure, they are direction dependent and therefore can be aligned to suit the material structure. Epoxy resin compounds are used as binding agents. Their special balanced composition ensures high adhesive to the glass fibre surface, resulting in optimum dynamic and electrical properties. The ratio of matrix resin and reinforcement fibres has been chosen to profit from all the benefits offered by the raw materials selected to form the composite material.  The matrix fulfils a number of important tasks. It provides fixing for the fibre in the desired arrangement and supports it against buckling when under compressive stress. In addition, it has g

Carbon is a composite material and differs significantly from quasiisotropic materials like steel or aluminium. As with glass fibrereinforced plastics, the material properties depend on the direction. With a density of approx. 1.6 g/cm³, the material is very light, while maintaining good rigidity and vibration behaviour. If you want to increase the rigidity of a GRP component, it is often sufficient to use a blend of glass and carbon fibres.

The tensiometers of the DCAT series are measuring instruments for force-based investigation of surface and interface properties. Because of the compact and modular product design of the DCAT series, a bespoke combination of device and accessories can be found for any use case. The DCAT 25SF single-fibre tensiometer contains a high-precision weighing system with a resolution of up to 0.1 μg. This enables measurements even on single carbon or glass fibres. Measurements can be carried out at defined humidity and at temperatures between -15 °C and 135 °C. In addition is it possible to investigate the viscoelasticity of monolayers. Furthermore, concentration series for determining the critical micelle concentration (CMC) can be automatically generated and measured. Measurements: - surface and interfacial tension - liquid density - dynamic contact angles - surface energy of solids - determination of the CMC - surface pressure - viscoelasticity of monolayers

synthetic filter media or filter media with irregular layer of coarse glass fibres individual pads or filter rolls available small installation depth low acquisition costs

filter media of elastic, progressivelystructured nonwoven glass or synthetic fibres reinforcing grid on clean air side glassfibre media with adhesives, germicidal effect spare filter for existing rolltape filter systems

PU composites are mainly found in the production of moulded parts resistant to bending. The skilful combination of materials puts the topic of lightweight construction into the spotlight (honeycomb technology applications). Sophisticated surface designs are supported by corresponding PU / UP resin systems. Thanks to the reduced component weight, moulded part applications are used in the automotive sector – and, with corresponding flame protection formulations, also in rail vehicle construction. Typical properties Moulded part density of 450–1100 kg/m³ Fibre proportion from 30 % Available foaming agents: usually water Reinforcing materials Glass fibre rovings Glass fibre mats and non-crimp glass fibre fabrics Carbon fibres Natural fibres (hemp, sisal, coconut etc.) Special formulations and versions Honeycomb materials for sandwich structure components Paper honeycombs Waterproof paper honeycombs (patent-pending process) Plastic honeycombs Aluminium honeycombs Systems with a large processing window Use of polyols based on renewable resources Self-parting with simultaneous good lamination properties Flame protection formulations Automotive: FMVSS 302 Rail vehicle construction: DIN 5510 (S4, SR2, ST2) Aircraft construction: FAR 25853, ABD 0031 Construction industry: DIN 4102 B2

The perfect machine to quickly and automatically return the winding material remaining on the spools to the recycling process. The spools do not suffer any damage and can therefore be used over a long period of time. Device details: ▪ Enables up to 24 braiding spools to be unwound at the same time ▪ Appropriate spools: ▫ Diameter of mandrel 23 mm (standard version) ▫ Spool outer diameter up to 100 mm ▫ Other spools with different inner and outer diameters possible ▪ Suitable for different winding materials, e.g. metal wire, plastic, natural, glass and carbon fibres

We offer fiberglass mats In guaranteed quality, at stable prices and packed appropriately for transportation. Do you need advice on choosing your product or are you looking for a suitable substitution? Our application and product experts are happy to help! Our experience and deep knowledge in the area of specialty chemicals and ingredients ensures that we are well positioned to effectively support both our customers and our suppliers with product and application expertise. Please contact us for more information!

We offer complex material In guaranteed quality, at stable prices and packed appropriately for transportation. Do you need advice on choosing your product or are you looking for a suitable substitution? Our application and product experts are happy to help! Our experience and deep knowledge in the area of specialty chemicals and ingredients ensures that we are well positioned to effectively support both our customers and our suppliers with product and application expertise. Please contact us for more information!

Claw hammers are essential for construction, carpentry, plumbing, electrical work, and more. Claw hammers have a simple yet elegant design as one of the oldest and most well-known tools. Featuring a hammerhead with a curved claw, claw hammers are also used for driving and extracting nails and grasping, manipulating, and cutting materials. The Ronix RH-4726 is an industrial-grade, all-purpose hammer designed for demanding DIY and professional use. This 8-ounce hammer combines exceptional strength and durability with ergonomics and versatility

• from high quality PPA, glass fiber reinforced • ideal for coated pots and pans • heat resistant up to 270°C / 518° F