Glass fibres - Import export

A softer version of the Panzerhand model. The gloves are softer yet still highly resistant. They allow more sensitivity in the fingers. The model is suitable in jobs with a risk of injury with cutting edges or a knife while you have to work with smaller items (for example, on an assembly line). The glove shows the highest figures according to EN 388 The glove is resistant to contact heat of 100oC according to EN 407 (class 1). The glove is in conformity with EN ISO 13997 as for surface cut, achieving excellent results of 28 N (Newton). In comparison, 22 Newton corresponds to class 5 according to EN 388. The gloves do not contain any glass fibres, which break to pieces during work! Gloves are offered in different versions GRIP – gloves are fitted with nonslip PVC dots SKIN – split cow‘s leather is sewn on the palm

Sharpking this glove is created from a special composite yarn with glassfiber, polyethylene, polyamide and other ressistant fibres. Retaining fine glove features (feeling in fingers) this glove reaches outstanding values of both abrasion and cut resistence according to EN 388. These gloves contain glass fibres. These gloves are particularly suitable for assembly work, handling sheet metal, handling construction materials, etc., where there is a risk of cuts, scratches, and abrasion. Due to its construction, the glove has an excellent grip ability. Gloves are offered in different versions GRIP – gloves are fitted with nonslip PVC dots SKIN – split cow‘s leather is sewn on the palm; these gloves are primarily used for handling oily sheet metal, on assembly lines, in the construction industry for handling rough materials, in the repair of agricultural machinery, etc. The glove is even resistant against punctures in the reinforced split leather area.

The glove is made of especially produced composite fibre Brinix MAX5, polyamide and polyethylene fibres. While retaining the properties of the fine glove (tactile sensitivity), it achieves excellent values in terms of abrasion resistance and resistance to cutting according to EN 388. This glove can no longer be compared to an aramid glove a similar glove is very difficult to make of aramid. The glove does not contain glass fibres, which break when working with and can cause problems. The glove is especially suitable for assembly work, handling sheet metal, handling building materials etc., where there is a risk of cutting, scratches and abrasions. Due to the construction of the glove, it also has an excellent gripping ability. GRIP – the glove is lined with PVC nonslip fabric.

WE PRODUCE ALL KINDS OF ACOUSTIC PANELS, WE CAN CUSTOMIZE ALL YOUR NEEDS. WE ARE THE MANUFACTURER OF ACOUSTIC PANELS SINCE 2004

We can produce different lengths 6mm, 12mm, 18mm and 24mm Usage: Glass fiber is suitable for use in waterproof plasters, cement-sand screeds, monolithic filling of external and internal walls, and structural thermal insulation. In industrial and housing construction. Recommended for the production of foam concrete paving slabs, and concrete plates. Ideal for underfloor heating systems. If you are interested in cooperation or have any queries, please feel free to contact us at +380 93 53 13 653 (WhatsApp, Viber)/ email: rebar.union@gmail.com.

banding tape, consisting of unidirectional glass fibres coated with thermosetting Polyester resin in B-stage.

TEXTALU® E is a thin wall glass fibre braid made of glass fibres with heat-reflecting aluminium coating. Its reflecting surface guarantees that the protective sleeve made of this high-performance material maintains a nearly constant interior temperature even under strongly fluctuating ambient temperatures. This non-ductile braid sleeve is ideal for protecting lines, cables and cable sets against radiation heat.

Special SiO 2> glass fibres that withstand high temperatures are the basic material for these products. Their characteristic properties are low thermal conductivity, minimum heat storage and absolute incombustibility. isoTHERM® ST does not irritate the skin, is absolutely harmless to health and has excellent chemical resistance properties. Available dimensions: width: 8 - 120 mm, thickness: 0,2 - 10 mm.

Special SiO 2> glass fibres that withstand high temperatures are the basic material for these products. Their characteristic properties are low thermal conductivity, minimum heat storage and absolute incombustibility. isoTHERM® ST does not irritate the skin, is absolutely harmless to health and has excellent chemical resistance properties. Available dimensions: 3 - 30 mm.

FFP2 Face Mask in white or black: Made in Germany in top quality. Features of the FFP2 mask Reliable self and respiratory protection (!) German origin "MADE IN GERMANY", production in Germany with materials from Germany Enormous filter performance, over >98 % according to test criteria of EN149:2001+A1:2009 Optimal breathing comfort - low breathing resistance, no shortness of breath, no difficult inhalation or exhalation Meets the requirements of the Personal Protective Equipment Regulation (EU) No. 2016/425 CE certified according to EU standard EN149-2001+A1:2009 Shelf life is 3 years from production date Free of harmful substances and glass fibres,

The basic material for isoTHERM® 1000 - Tapes is produced by a chemical refinement process. The components that melt at a low temperature are eliminated from E-glass fibres in this process, so that the temperature resistance level is increased. The products can be identified by their light blue colour. isoTHERM® 1000 has extremely textile properties, does not irritate the skin at all and is classified as absolutely harmless to health. Available dimension: width: 8 - 120 mm, thickness: 2 - 10 mm.

Carbon is a composite material and differs significantly from quasiisotropic materials like steel or aluminium. As with glass fibrereinforced plastics, the material properties depend on the direction. With a density of approx. 1.6 g/cm³, the material is very light, while maintaining good rigidity and vibration behaviour. If you want to increase the rigidity of a GRP component, it is often sufficient to use a blend of glass and carbon fibres.

ARKPEEK-GF30: 30% Glass Fiber + 70% PEEK Glass filled PEEK exhibits increased mechanical strength and high rigidity. improved creep strength and dimensional stability are achieved by this glass filled PEEK. These properties make this material suitable for use in parts which are exposed to high static loads over long periods in high temperature onditions. This is a special 30% glass filled PEEK modification that PEEKChina manufactures under the name PEEK GF30 natural. In comparison to unfilled PEEK, this glass fibre reinforced material exhibits increased mechanical strength and high rigidity. Furthermore, improved creep strength and dimensional stability are achieved by this glass filled PEEK. These properties make this material suitable for use in parts which are exposed to high static loads over long periods in high temperature conditions. As glass fibres tend in some cases to have a marked abrasive effect on mating surfaces.

A ViTEQ Loss-in-Weight Feeders are designed to ensure a continuous, gravimetric and high tolerance batch dosing of flowable bulk materials that are not hygroscopic, adhesive or interleaving features. The feeders are sSuitable for many bulk materials including those with the following characteristics: fragile (food products) abrasive (coarse powder, pellets, granulate) difficult to handle (like fibres, glass fibres, pharmaceutical powders) Suitable for wherever precise dosing and weighing of the main components and additives is necessary. Ideal in the following industries: Food & Animal Feed Plastics / Chemicals Pharmaceuticals Advantages & benefits less shear and pressure forces Troughs have a dead space-free design quick and easy cleaning, maintenance-free vibration discharge very gentle weighing (volumetric and gravimetric) highly precise dosing high throughputs Construction Technical data WLW-L WLW-M WLW-H Trough length (mm) 275 - 1.100 275 - 1.100 275 - 1.100 Trough wi

  S-Ply® is a glass-fibre composite material that is suitable for the highest dynamic requirements. The load carrying and supporting material is a strictly parallel-orientated, non-woven, glass- or carbon-fibre laminate (UD-prepregnated).     The glass-fibres are not stretched and not bent. In contrast to metallic materials with an isotropic structure, they are direction dependent and therefore can be aligned to suit the material structure. Epoxy resin compounds are used as binding agents. Their special balanced composition ensures high adhesive to the glass fibre surface, resulting in optimum dynamic and electrical properties. The ratio of matrix resin and reinforcement fibres has been chosen to profit from all the benefits offered by the raw materials selected to form the composite material.  The matrix fulfils a number of important tasks. It provides fixing for the fibre in the desired arrangement and supports it against buckling when under compressive stress. In addition, it has g

This glove is a lighter version of the Panzerhand M2 gloves. It is a softer, but highly durable glove. When working, it allows for greater tactile sensitivity. It is suitable wherever there is a risk of injury from sharp edges or blades and, at the same time, it is necessary to work with smaller objects (e.g. on an assembly line). The gloves are also used in the food industry, especially for meat cutting. The glove complies with EN ISO 13997 for surface cutting and achieves excellent results of 60.0 s (Newton). For comparison, 22 Newton is a value corresponding to class 5 according to EN 388. The gloves comply with the requirements of Regulation 1935/2004 of the European Parliament and of the Council for materials and articles intended to come into contact with food. This is evidenced by the relevant certificate. The gloves do not contain glass fibres, which break when working with and may remain in processed food! Varianta Silvernite

AntiCut MAX5 this glove is created from a special composite yarn Brinix N5 with steel, polyethylene, polyamide and other ressistant fibres. Retaining fine glove features (feeling in fingers) this glove reaches outstanding values of both abrasion and cut resistence according to EN 388. This glove cannot be practically compared with the Aramid one a similar glove would be produced very hardly. The gloves do not contain any glass fibres, which break to pieces during work! These gloves are particularly suitable for assembly work, handling sheet metal, handling construction materials, etc., where there is a risk of cuts, scratches, and abrasion. Due to its construction, the glove has an excellent grip ability.

For infrared heating in production processes that require a specific shape, Victory can produce contoured infrared lamps. They can be made to any shape and are available in a variety of finishes. Contact us to discuss your specification. Applications include Joining and welding plastic parts, Drawing glass or plastic fibres, Heat shrinking, Adhesive curing and Butt welding.

The tensiometers of the DCAT series are measuring instruments for force-based investigation of surface and interface properties. Because of the compact and modular product design of the DCAT series, a bespoke combination of device and accessories can be found for any use case. The DCAT 25SF single-fibre tensiometer contains a high-precision weighing system with a resolution of up to 0.1 μg. This enables measurements even on single carbon or glass fibres. Measurements can be carried out at defined humidity and at temperatures between -15 °C and 135 °C. In addition is it possible to investigate the viscoelasticity of monolayers. Furthermore, concentration series for determining the critical micelle concentration (CMC) can be automatically generated and measured. Measurements: - surface and interfacial tension - liquid density - dynamic contact angles - surface energy of solids - determination of the CMC - surface pressure - viscoelasticity of monolayers

Contains no organic binder. The resultant sheets are self supporting, flexible, lightweight with exceptional thermal performance characteristics and produce no emissions on firing. Excelfrax 550 Felt exhibits thermal performance approaching that of Microporous products and can therefore be used whenever space is limited or premium thermal performance is required. The sheets are available in a wide range of standard sizes, are easily cut and can be formed into geometrically demanding shapes or around complex contours. GENERAL CHARACTERISTICS Exceptionally low thermal conductivity Organic binder free Resistance to thermal shock Good handling strength Extensive thickness range Easy to cut with standard tools TYPICAL APPLICATIONS High performance back-up insulation Domestic appliance (ovens, heaters, boilers etc.) Automotive heat shields Fuel cells Cryogenic applications

synthetic filter media or filter media with irregular layer of coarse glass fibres individual pads or filter rolls available small installation depth low acquisition costs

filter media of elastic, progressivelystructured nonwoven glass or synthetic fibres reinforcing grid on clean air side glassfibre media with adhesives, germicidal effect spare filter for existing rolltape filter systems

PU composites are mainly found in the production of moulded parts resistant to bending. The skilful combination of materials puts the topic of lightweight construction into the spotlight (honeycomb technology applications). Sophisticated surface designs are supported by corresponding PU / UP resin systems. Thanks to the reduced component weight, moulded part applications are used in the automotive sector – and, with corresponding flame protection formulations, also in rail vehicle construction. Typical properties Moulded part density of 450–1100 kg/m³ Fibre proportion from 30 % Available foaming agents: usually water Reinforcing materials Glass fibre rovings Glass fibre mats and non-crimp glass fibre fabrics Carbon fibres Natural fibres (hemp, sisal, coconut etc.) Special formulations and versions Honeycomb materials for sandwich structure components Paper honeycombs Waterproof paper honeycombs (patent-pending process) Plastic honeycombs Aluminium honeycombs Systems with a large processing window Use of polyols based on renewable resources Self-parting with simultaneous good lamination properties Flame protection formulations Automotive: FMVSS 302 Rail vehicle construction: DIN 5510 (S4, SR2, ST2) Aircraft construction: FAR 25853, ABD 0031 Construction industry: DIN 4102 B2

SHERA plank is a unique fibre cement composite of natural fibres bonded tightly in a high-grade silicate structure. This autoclaved wood-grain siding acquires impressive toughness, yet remains flexible and dimensionally stable. It is cellulose cement plank that contains absolutely NO asbestos fibre, no fibre glass fibres nor formaldehyde. SHERA Plank comes in square cut edge or shiplap edge. Benefits: - Weather Resistant - Do not rot - Easy to maintain - Easy installation - Fire resistant - Flexible - Low shrinkage - High workability - Insect resistant - No asbestos SHERA Plank is the perfect fibre cement plank for use in exterior siding applications such as cladding houses that face a constant threat from weather, insects and water damage since it possesses excellent properties of pest resistance, impact strength and water/moisture resistance. It comes in several sizes and textures and primed planks can be coated before or after installation (double coating).

The perfect machine to quickly and automatically return the winding material remaining on the spools to the recycling process. The spools do not suffer any damage and can therefore be used over a long period of time. Device details: ▪ Enables up to 24 braiding spools to be unwound at the same time ▪ Appropriate spools: ▫ Diameter of mandrel 23 mm (standard version) ▫ Spool outer diameter up to 100 mm ▫ Other spools with different inner and outer diameters possible ▪ Suitable for different winding materials, e.g. metal wire, plastic, natural, glass and carbon fibres

We offer fiberglass mats In guaranteed quality, at stable prices and packed appropriately for transportation. Do you need advice on choosing your product or are you looking for a suitable substitution? Our application and product experts are happy to help! Our experience and deep knowledge in the area of specialty chemicals and ingredients ensures that we are well positioned to effectively support both our customers and our suppliers with product and application expertise. Please contact us for more information!

We offer complex material In guaranteed quality, at stable prices and packed appropriately for transportation. Do you need advice on choosing your product or are you looking for a suitable substitution? Our application and product experts are happy to help! Our experience and deep knowledge in the area of specialty chemicals and ingredients ensures that we are well positioned to effectively support both our customers and our suppliers with product and application expertise. Please contact us for more information!