Ventilation - Import export

In order to introduce an appropriate pressure, a centrifugal fan is imperative. If a fan is equipped with a frequency control, the system can be optimally regulated.

The PERFECT AirVent cable gland: protection for hermetically sealed electro-technical and elecronic enclosures against condensation water from alternating temperature and pressure. Features: — continuous ventilation — adaptation of the inner pressure — water entry pressure of the Membrane > 0,3 bar — available in sizes M20, M25 — for cables from 5 to 16 mm — temperature range -20 °C / +100 °C — protection grade IP66 / IP68

Waterproof enclosures with protection grades IP67 or IP68 for outdoor use are not automatically sealed against vapour and humid air. To avoid negative pressure, high humidity and condensation inside the enclosure a continuous Ventilation and pressure equilibrium is necessary. This function can be achieved by using a venting element made by Jacob. Features: - Continuous ventilation and adaptaion on the inner pressure - Hydrophobic and oleophobic PES- membrane - Body from stainless steel 1.4305 - Theoretical air flow through usable surface up to 75 l/h at Delta-p = 0,07 bar - Water entry pressure >= 0,83 bar (dynamic WEP, 30 seconds) - Temperature range -40°C / +100°C - Protection grade IP66 / IP68 - 0,6 bar (60 min.) / IP69

Waterproof enclosures with protection grades IP67 or IP68 for outdoor use are not automatically sealed against vapour and humid air. To avoid negative pressure, high humidity and condensation inside the enclosure a continuous Ventilation and pressure equilibrium is necessary. This function can be achieved by using a venting element made by Jacob. Features: - Continuous ventilation and adaptaion on the inner pressure - Hydrophobic and oleophobic PES- membrane - Polyamide material fulfills UL 94 V-0 and EN 45545-2, R22: HL3 / R23: HL3 - Theoretical air flow through usable surface up to 170 l/h at Delta-p = 0,07 bar - Water entry pressure >= 0,83 bar (dynamic WEP, 30 seconds) - Temperature range -40°C / +100°C - Protection grade IP66 / IP68 - 0,6 bar (60 min.) / IP69

Application in electro enclosures. Features: - Continuous ventilation and drainage of the enclosure - Pressure equalization between enclosure and outer atmosphere - Reduces condensation - Polyamide PA6 V-0 - Temperature range -40°C / +100°C - Protection grade max. IP65 Vertical installation at the lowest point of the enclosure bottom so that condensation water can drain off via the breather.

The PERFECT AirVent cable gland: protection for hermetically sealed electro-technical and elecronic enclosures against condensation water from alternating temperature and pressure. Features: — continuous ventilation — adaptation of the inner pressure — water entry pressure of the Membrane > 0,2 bar — available in sizes M12, M16 and M20 — for cables from 2 to 13 mm — temperature range -20 °C / +100 °C (dynamic) — protection grade IP66 / IP68

complete machinery for micro perforation

DiAm line is ideal to intake or exhaust air through circular ducting in: public locals, offices, shops, bars, pools, laboratories, kitchens, toilets, workshops, restaurants etc. its compact steel structure, external rotor motor and centrifugal backward bladed impeller ensure: • easy installation; • flexible working by adjusting the rpm; • high efficiency; • sturdiness and reliability. rANGE This line consists of 6 models with diameters from 100 up to 315mm. cONSTrUcTiON • casing in weather proof steel sheet. • Steel sheet motor supports with airflow straighteners. • External rotor motor iP44 protection iSO B, speed adjustable by electronic speed regulator. • High efficiency backward blade impeller. • Terminal box in techno-polymer. TEcHNicAlSPEciFicATiONS • conveyed air: clean. • Temperature air: -20°c/ +50°c. • Voltage and frequency: mono phase 230V-50 Hz.

Wall-mounted exhaust fan with axial aspiration. Supplied with dowels for wall installation. The kit is available for installation on windows AUTOMATIC OPENING/CLOSURE IN MYLAR

Serie Etesi- wall exhaust fan. Built in axial fan with expulsion.

Serie Cappa Aspirante- Kitchen Hood with or without light. The version with light have 6 LED of a cool White color, light consume 12 V - 0.7W. In both version filter is detachable and washable. Serie AO- Porthole air pocket in thermoplastic polipropilen with snap-on opening and closing. Suitable for holes of 165/185 diameter. With standard ferrule for thickness of up to 45 mm. On request high ferrule for tickness up to 55/60 mm. Serie S11- axial exhaust fan in thermoplastic material. Consume 12 V. Serie S72-axial exhaust fan in thermoplastic material . Consume 12V. CAMINO PER SCARICO- exhaust gas stack in Polypropylen and Pocan •MOPLEN: to discharge exhalations; •PARAPIOGGIA: to discharge exhalations with antisplash guard in the upper part; •POCAN: to discharge heating (heat resistant).

Serie LPE HELICAL FANS FOR WALL The LPE serie’s fans, present constructive characteristics that allow both the utilization in the industrial applications and the installations in the tertiary environments (workshops, stores, breedings, glasshouses) where there is the real necessity of the employment of a fan with easy installation, low consumptions, and reduced noise pressure levels.

DIRECT DRIVEN CENTRIFUGAL FANS EMPLOYMENT •Single inlet centrifugal fans. •Suitable for clean air and temperatures up to 60°C on machines and process-units. •10 models with air flow up to 4.000 m3/h and stastic pressure up to 180 mm H2O (1.800 Pa). •Steel housing painted impeller with forward curved blades wire mesh guard on inlet, outlet flange. • Enclosed and ventilated motor, three phase or single phase, IP55 protection, class F. BY REQUEST •Inlet spigot. •Model LCB AT. •Construction for air temperature up to 200° C.

Thermal aerator for windows in translucent thermoplastic material with manual opening and closure system, with anti-insect net. It can be installed both on single and double glazing by simply turning the ring.

Centrifugal wall-mounted exhaust fan. For holes of ø 100 mm. By removing the rubber ring the fan becomes suitable for holes of ø 80 mm or ø 90 mm. Supplied with dowels for wall installation. Brushless engine 70% energy saving. Threefold life. Anti-static finish that provides protection from dust and dirt. On request it is possible to have 12 Volt SELV exhaust fan that can be installed in ZONE 1

LUX ROOF AXIAL FAN is designed to extract large volumes of air in roof installations, without long ducts. For instance: ventilation of industrial buildings (factories, warehouses etc.), stock farms

Serie LEVANTE WALL EXHAUST AXIAL FANS Wall-mounted exhaust fan with axial aspiration. Supplied with dowels for wall installation. Anti-static finish that provides protection from dust and dirt. The kit is available for installation on windows.

The Minneapolis Micro Leakage Meter (MLM) Measuring System has been developed by the manufacturer The Energy Conservatory in close cooperation with BlowerDoor GmbH in order to guarantee the functionality of ventilation systems by conducting airtightness tests of the duct system. With a measuring range of 0.17 to 78.5 m³/h, the MLM is also suitable for testing building components as well as small and highly airtight clean rooms.

The new portable HUNGER universal refacing machine UDM4E is a versatile machine offering a choice of modular components for refacing valves and valve seats as well as counterboring seat ring pockets and resurfacing the sealing surfaces on cylinder heads, cylinder liners and engine blocks of large diesel and gas engines. Key features: - No abrasive dust. A fast clean cut, - Compact and handy design - Modular add-on components provide a flexible solution for multiple projects - Powered by SELV (Safety Extra Low Voltage) to avoid risk of electrical shock - Power supply with universal AC input - Fast set-up time - Easy to use - The economical solution for both field and workshop use »Roundness, concentricity and surface finish of the refaced faces are within manufacturers’ specifications or even better«

The propellers of AKAP sleeve fans, which can meet high air flow rates and high pressure losses, are made of aluminum raw material and they provide the chance to change the flow and pressure by adjusting the blade angles. They can be produced with a motor that can withstand temperatures of 200, 300, 400 °C for 120 minutes upon request.

*Made Of Galvanized Metal Plate *Wihtout Motor *Air System Easily With The Help Of Rectangular Fans *Designed For The Needs Of Middle Upper Aspiration Capacity *With The Help Of The Maintenance Covers, Engine And Fan Can Be Fixed Without Removing The Equipment.

Medical instrumentation that is used for treatment in the respiratory tract in critically ill patients prevents the patient from performing inhaled gas humidification and heating functions. BioAQUA prevents cold and dry medical gases from damaging the respiratory epithelium during invasive and noninvasive mechanical ventilation by heating and humidifying the gas in the inspiration line.

Brake ventilation hoses with visible or concealed wire spiral. The inside is coated with neoprene or silicone, depending on the version. Due to the wire spiral, the hoses are very flexible and can be laid very well even with larger hose diameters.

We develop and manufacture blower components such as fans, motors, duct guides, electronics and housings and, if desired, integrate them into assemblies and devices. In addition, we develop entire blowers as well as the required equipment. Furthermore, we are your contact for fan optimisation with regard to improved volume flow, more efficient volume pressure and noise reduction.

High flow industrial roof extractor for the extraction of stale air HELIX BOX MANN industrial roof extractors have an extraction capacity from 21,000 m3/ h to 39,800 m3 / h and are the perfect solution for the extraction of stale air in industrial buildings, warehouses, farms, greenhouses, etc. Main features - Air flow from 21,000 m3/h to 39,800 m3/h - External structure made of galvanized steel. - Overpressure shutter made of galvanized steel. - Propellers made of AISI 430 BA stainless steel. - High quality bearings. - IP-55 three-phase electric motor - V-belts. - Transmission pulleys made of magnesium aluminum. - Engine support with tensioner. - Roof supports. - Air inlet with protection grid. - Anti rain visor.

High-reach diffusers with 3-way air outlet. - Admissible flows from 5,500 m3/h to 63,000 m3/h. - Made of galvanized steel painted in oven-dried polyester powder paint in RAL 7035 gray. - Simple deflection grilles with slats made of polyamide. - Opening regulation from 0º to 90º. - Possibility of supply with double deflection grids. - 30mm METU clamping frame.

The HRUSlimAIR heat recovery unit is designed for residential buildings. The HRU has a capacity of 250 m3/h @ 100 Pa, generated by energyefficient EC fans. Thanks to a counterflow heat exchanger made of a plastic (PET), it achieves up to 90% heat recovery An ERV version with an enthalpy exchanger that recovers moisture is also available. Builtin electric preheater protects heat exchanger against freezing, wireless radio communication connects controllers and sensors, and all of it is enclosed inside a selfsupporting, insulating EPP casing. HRUSlimAIR can be installed in up to 3 positions, thanks to a special condensate drain system.

The insulated manifold box is used for mechanical ventilation systems with heat recovery (MVHR). MVHR manifolds do not need to be insulated onsite thanks to the insulating properties of EPP. Manifold boxes are designed for distribution of 75mm semi-rigid ducting around. The number of connectors varies depending on the user's specifications: 6-13 connection spigots.

AD SMALL PREMIUM evaporative air conditioners for evaporative air conditioning in industrial, commercial, agricultural or livestock premises Evaporative coolers are a natural cooling system that uses water as a cooling element. Its basic operating principle is to suck in the outside air and pass it through some cooling panels moistened with water. Once the air passes through this panel, it cools and increases its humidity. Once this process has been carried out, the air is propelled inside the premises to be air-conditioned and, based on the appropriate renovations and extraction of air, a comfortable comfort temperature and adequate indoor air quality are achieved for people. AD SMALL PREMIUM evaporative air conditioners, develop an air flow from 5,760 m3/h to 17,145 m3/h with an available pressure at a maximum flow of 100 Pa, its cooling capacity is suitable for premises from 67m2 to 255m2