Ventilation - Import export

Ventilation Technicians ready for your projects! With expertise and dedication, we ensure success. Our Ventilation Technicians: •,Experienced: Years of expertise from diverse projects. •,Precise and Reliable: Work meticulously, maintaining high standards. •,Team Players: Adapt easily, collaborate for project success. Ready for new challenges! If you need skilled Ventilation Technicians for upcoming projects, we're your right partner.

In order to introduce an appropriate pressure, a centrifugal fan is imperative. If a fan is equipped with a frequency control, the system can be optimally regulated.

The PERFECT AirVent cable gland: protection for hermetically sealed electro-technical and elecronic enclosures against condensation water from alternating temperature and pressure. Features: — continuous ventilation — adaptation of the inner pressure — water entry pressure of the Membrane > 0,3 bar — available in sizes M20, M25 — for cables from 5 to 16 mm — temperature range -20 °C / +100 °C — protection grade IP66 / IP68

Waterproof enclosures with protection grades IP67 or IP68 for outdoor use are not automatically sealed against vapour and humid air. To avoid negative pressure, high humidity and condensation inside the enclosure a continuous Ventilation and pressure equilibrium is necessary. This function can be achieved by using a venting element made by Jacob. Features: - Continuous ventilation and adaptaion on the inner pressure - Hydrophobic and oleophobic PES- membrane - Body from stainless steel 1.4305 - Theoretical air flow through usable surface up to 75 l/h at Delta-p = 0,07 bar - Water entry pressure >= 0,83 bar (dynamic WEP, 30 seconds) - Temperature range -40°C / +100°C - Protection grade IP66 / IP68 - 0,6 bar (60 min.) / IP69

Waterproof enclosures with protection grades IP67 or IP68 for outdoor use are not automatically sealed against vapour and humid air. To avoid negative pressure, high humidity and condensation inside the enclosure a continuous Ventilation and pressure equilibrium is necessary. This function can be achieved by using a venting element made by Jacob. Features: - Continuous ventilation and adaptaion on the inner pressure - Hydrophobic and oleophobic PES- membrane - Polyamide material fulfills UL 94 V-0 and EN 45545-2, R22: HL3 / R23: HL3 - Theoretical air flow through usable surface up to 170 l/h at Delta-p = 0,07 bar - Water entry pressure >= 0,83 bar (dynamic WEP, 30 seconds) - Temperature range -40°C / +100°C - Protection grade IP66 / IP68 - 0,6 bar (60 min.) / IP69

Brushed structure stainless steel AISI 430 The hood is slant and the filters are installed with an angle of 45 ° Standard with Led Lightning 5W builtin Standard produced with fat drain valve Included Labyrinth filters 400x400mm Included On/Off controller with lightning & gasvalve on/off switch butto

Application in electro enclosures. Features: - Continuous ventilation and drainage of the enclosure - Pressure equalization between enclosure and outer atmosphere - Reduces condensation - Polyamide PA6 V-0 - Temperature range -40°C / +100°C - Protection grade max. IP65 Vertical installation at the lowest point of the enclosure bottom so that condensation water can drain off via the breather.

The PERFECT AirVent cable gland: protection for hermetically sealed electro-technical and elecronic enclosures against condensation water from alternating temperature and pressure. Features: — continuous ventilation — adaptation of the inner pressure — water entry pressure of the Membrane > 0,2 bar — available in sizes M12, M16 and M20 — for cables from 2 to 13 mm — temperature range -20 °C / +100 °C (dynamic) — protection grade IP66 / IP68

complete machinery for micro perforation

DiAm line is ideal to intake or exhaust air through circular ducting in: public locals, offices, shops, bars, pools, laboratories, kitchens, toilets, workshops, restaurants etc. its compact steel structure, external rotor motor and centrifugal backward bladed impeller ensure: • easy installation; • flexible working by adjusting the rpm; • high efficiency; • sturdiness and reliability. rANGE This line consists of 6 models with diameters from 100 up to 315mm. cONSTrUcTiON • casing in weather proof steel sheet. • Steel sheet motor supports with airflow straighteners. • External rotor motor iP44 protection iSO B, speed adjustable by electronic speed regulator. • High efficiency backward blade impeller. • Terminal box in techno-polymer. TEcHNicAlSPEciFicATiONS • conveyed air: clean. • Temperature air: -20°c/ +50°c. • Voltage and frequency: mono phase 230V-50 Hz.

Serie Etesi- wall exhaust fan. Built in axial fan with expulsion.

Wall-mounted exhaust fan with axial aspiration. Supplied with dowels for wall installation. The kit is available for installation on windows AUTOMATIC OPENING/CLOSURE IN MYLAR

Serie LPE HELICAL FANS FOR WALL The LPE serie’s fans, present constructive characteristics that allow both the utilization in the industrial applications and the installations in the tertiary environments (workshops, stores, breedings, glasshouses) where there is the real necessity of the employment of a fan with easy installation, low consumptions, and reduced noise pressure levels.

DIRECT DRIVEN CENTRIFUGAL FANS EMPLOYMENT •Single inlet centrifugal fans. •Suitable for clean air and temperatures up to 60°C on machines and process-units. •10 models with air flow up to 4.000 m3/h and stastic pressure up to 180 mm H2O (1.800 Pa). •Steel housing painted impeller with forward curved blades wire mesh guard on inlet, outlet flange. • Enclosed and ventilated motor, three phase or single phase, IP55 protection, class F. BY REQUEST •Inlet spigot. •Model LCB AT. •Construction for air temperature up to 200° C.

Thermal aerator for windows in translucent thermoplastic material with manual opening and closure system, with anti-insect net. It can be installed both on single and double glazing by simply turning the ring.

Centrifugal wall-mounted exhaust fan. For holes of ø 100 mm. By removing the rubber ring the fan becomes suitable for holes of ø 80 mm or ø 90 mm. Supplied with dowels for wall installation. Brushless engine 70% energy saving. Threefold life. Anti-static finish that provides protection from dust and dirt. On request it is possible to have 12 Volt SELV exhaust fan that can be installed in ZONE 1

LUX ROOF AXIAL FAN is designed to extract large volumes of air in roof installations, without long ducts. For instance: ventilation of industrial buildings (factories, warehouses etc.), stock farms

Serie LEVANTE WALL EXHAUST AXIAL FANS Wall-mounted exhaust fan with axial aspiration. Supplied with dowels for wall installation. Anti-static finish that provides protection from dust and dirt. The kit is available for installation on windows.

With a measuring range of 17 to 500 m³/h, the Minneapolis FlowBlaster has been especially designed for testing ventilation systems during residential and commercial construction. In combination with the measuring fan BlowerDoor MiniFan, it allows the precise measurement of the air flow at supply and exhaust air valves. Measuring the supply and exhaust air flow at the respective valves provides information as to whether the requirements have been implemented as designed. If the air flows measured at the valves deviate from the requirements, the ventilation system can be adjusted.

The Minneapolis Micro Leakage Meter (MLM) Measuring System has been developed by the manufacturer The Energy Conservatory in close cooperation with BlowerDoor GmbH in order to guarantee the functionality of ventilation systems by conducting airtightness tests of the duct system. With a measuring range of 0.17 to 78.5 m³/h, the MLM is also suitable for testing building components as well as small and highly airtight clean rooms.

The new portable HUNGER universal refacing machine UDM4E is a versatile machine offering a choice of modular components for refacing valves and valve seats as well as counterboring seat ring pockets and resurfacing the sealing surfaces on cylinder heads, cylinder liners and engine blocks of large diesel and gas engines. Key features: - No abrasive dust. A fast clean cut, - Compact and handy design - Modular add-on components provide a flexible solution for multiple projects - Powered by SELV (Safety Extra Low Voltage) to avoid risk of electrical shock - Power supply with universal AC input - Fast set-up time - Easy to use - The economical solution for both field and workshop use »Roundness, concentricity and surface finish of the refaced faces are within manufacturers’ specifications or even better«

The propellers of AKAP sleeve fans, which can meet high air flow rates and high pressure losses, are made of aluminum raw material and they provide the chance to change the flow and pressure by adjusting the blade angles. They can be produced with a motor that can withstand temperatures of 200, 300, 400 °C for 120 minutes upon request.

*Made Of Galvanized Metal Plate *Wihtout Motor *Air System Easily With The Help Of Rectangular Fans *Designed For The Needs Of Middle Upper Aspiration Capacity *With The Help Of The Maintenance Covers, Engine And Fan Can Be Fixed Without Removing The Equipment.

The systems for ventilation, thanks to its abilities and flexibility, are a component part of each newly built structure regardless of its purpose, construction, or size. The basic function of ventilation is to provide by air change a higher quality of internal air. Due to the system specificities, the unification is not possible – each structure is processed separately. The company has in its offer the supply of equipment, installation and service of systems for industrial exhausting, transportation, ventilation, air heating, and air conditioning of industrial plants, super markets, catering structures, and high-standard structures. We perform the installation of all types of ( HVAC) technology, supply and installation of ventilation ducts, cooling systems in accordance with project documents and standards, depending on the purpose of rooms in agreement with clients and end buyers. Ventilation ducts bent spiral and flexible pipes distribution elements

Medical instrumentation that is used for treatment in the respiratory tract in critically ill patients prevents the patient from performing inhaled gas humidification and heating functions. BioAQUA prevents cold and dry medical gases from damaging the respiratory epithelium during invasive and noninvasive mechanical ventilation by heating and humidifying the gas in the inspiration line.

Brake ventilation hoses with visible or concealed wire spiral. The inside is coated with neoprene or silicone, depending on the version. Due to the wire spiral, the hoses are very flexible and can be laid very well even with larger hose diameters.

Anemostat is a component that is mounted on the supply vents of a mechanical ventilation system. Its main function is to distribute air from outside to the interior. It performs well in buildings where there are frequent problems with proper air circulation. 50 years of DOSPEL'S manufacturing experience is the highest quality guarantee

The EURO 2 axial duct fan with dimensions of fi 120 mm is designed for ventilation of residential, office, catering and small industrial spaces. Made of ABS plastic, which provides protection against adverse weather conditions. Produced in Poland and based on Polish electronics. 5-year manufacturer's warranty. 50 years of DOSPEL experience in production is a guarantee of the highest quality.

Innovative ventilation grille with shutter. It stands out for its elegant design. Practical and convenient. Mechanical shutter is opened and closed by two pull cords. It is very easy to adjust. The ventilation grille protects the room from contamination that could escape from the ventilation system to the outside. 50 years of DOSPEL's manufacturing experience is the highest quality guarantee.