Results for

Finish coat - Import export

314 Companies

186 Products

Product recommendations

France

France

See more products

SEMIN

France

SEMIN Is a family-run French industrial group specializing in the manufacture of building materials. We provide quality solutions to the building trade for construction and interior renovation of dwellings. Innovation has been part of SEMIN's DNA since 1838... our main aim being to develop technical solutions that make product application easy and save time on building sites. SEMIN has 6 industrial sites in France and 4 abroad and employees 650 people. The group turns over € 160 M, 40% of which is abroad in more than 66 countries worldwide. We are customer-centric. The proximity of our teams out on the ground combined with our flexibility and responsiveness are factors that make us stand out. We are convinced that the quality of service that we provide our customers is of the essence. The group plans to expand responsibly by keeping our environmental impact closely under control.

All the products for "finish coat"

Fine coating for spraying airless projection

3x less sanding 3x less dust

Lightweight plaster for plasterboard joints

Paste coating for interior finish

Ultra-light filler paste interior and exterior

Website See all products
SIA SILK PLASTER GROUP (EU)

Latvia

"Silk Plaster" (liquid wallpaper) is exceptional finishing material for interior design. Decorative wall covering "Silk Plaster" is a silk liquid wallpaper of the new generation. Decorative wall plaster "Silk Plaster" is made only from environmentally friendly and healthy raw components. Liquid wallcoverings Silk Plaster, liquid wall cover is ECO-friendly plaster, safe and healthy finishing material, decorative plaster, do it yourself plaster. It hides minor surface defects and cracks, unlike traditional wallpaper, no peel off and no joints. Silk Plaster allows partially repair of the surface, surface repair plaster. Decorative plaster Silk Plaster (liquid wallpaper) can be applied to any surface relief, columns, ceilings, arches. Decorative wallpaper "Silk Plaster" is wear-resistant finishing material, odorless liquid wallpaper, sound insulation plaster and thermal insulation plaster, liquid wall cover, liquid cotton cover for walls, liquid silk cover for walls, liquid plasters.
LUX FACADE

France

The company LUX FACADE, is a Service Provider, which operates in the Painting - contractors industry. It also operates in the thermal insulation, and finish coat industries. It is based in Metz, France.
WAIBEL GMBH

Germany

The company WAIBEL GMBH, is a Service Provider, which operates in the Thermal insulation materials industry. It also operates in the Rehabilitation – works, finish coat, and Rehabilitation – works industries. It is based in Waldkirch, Germany.
SOCIETE LISSE ECLAIR

France

The company SOCIETE LISSE ECLAIR, is a Manufacturer/ Producer, which operates in the Restoration and renovation - contractors industry. It also operates in the Glues, adhesives and applicators, Glues, natural, Glues, adhesives and applicators, finish coat, Glues, natural, and plaster slabs industries. It is based in Forbach, France.

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

PEINTURE GÉNÉRAL DU BÂTIMENT

France

The company PEINTURE GÉNÉRAL DU BÂTIMENT, is a Service Provider, which operates in the Handicraft industry. It also operates in the outdoor paints, indoor paints, and finish coat industries. It is based in Albi, France.
CARON

Belgium

The company CARON, is a Wholesaler, which operates in the Paints and varnishes industry. It also operates in the Enamels, Enamels, work clothes, plaster, and finish coat industries. It is based in Brussel, Belgium.
TECHNIK RENOV

France

The company TECHNIK RENOV, is a Service Provider, which operates in the Painting - contractors industry. It also operates in the façade cleaning, wall-coverings applied, and finish coat industries. It is based in Albi, France.
MB JAKUB JAKUB MARCINIAK

Poland

The company MB JAKUB JAKUB MARCINIAK, is a Wholesaler, which operates in the Plaster industry. It also operates in the finish coat, epoxy paint, and whitewashing industries. It is based in Chodziez, Poland.
DLS

France

The company DLS, is a Distributor, which operates in the Façade work contractors industry. It also operates in the plaster chalk, finish coat, and facade decorations industries. It is based in Saint Laurent Du Var, France.

ÉCLATVISION

France

The company ÉCLATVISION, is a Service Provider, which operates in the Painting - contractors industry. It also operates in the general renovation work, finish coat, and painting industries. It is based in Castanet-Tolosan, France.
MEGA-C

France

The company MEGA-C, is a Service Provider, which operates in the Plastering contractors industry. It also operates in the faux plafonds en platre, finish coat, partitioning, and dubbing industries. It is based in Osny, France.

Product recommendations

Lightweight plaster for plasterboard joints

France

Portugal

Germany

Germany

See more products

ELMABUD

Poland

The company ELMABUD, is a Subcontractor, which operates in the Tiling and paving - firms industry. It also operates in the university motar boards, and finish coat industries. It is based in Częstochowa, Poland.
MORTERO SARL

Algeria

The company MORTERO SARL, is a Manufacturer/ Producer, which operates in the Mortar for construction industry industry. It also operates in the tiling mortars, and finish coat industries. It is based in BEJAIA, Algeria.
4CR INTERNATIONAL GMBH

Germany

4CR has set a global benchmark for automotive refinishing since 2004. Across 78 countries and with over 1600 products, we have maintained the same philosophy – to always be available at the right time with the right solution. Four of us founded 4CR close to Hamburg in northern Germany. Today, we are the loyal partner of thousands of automotive painters in over 78 countries and always feel like we're one big family. We have our roots in Germany, where we embraced the values of precision, reliability and pride in our craftsmanship. We offer an impressively comprehensive range of over 1600 products. In 2024, we will be celebrating 20 years on the market, during which we have continuously grown and benefited from your valuable feedback. 4CR's product line for painting and varnishing is the result of our experience combined with your feedback. We would like to thank our partners for this and to warmly welcome you as a new partner of 4CR.

All the products for "finish coat"

7447 Spray Paint for Plastic basalt grey 400 ml

7447 Spray Paint for Plastic graphit grey 400 ml

7447 Spray Paint for Plastic dark grey 400 ml

7447 Spray Paint for Plastic black 400 ml

7447 Spray Paint for Plastic medium grey 400 ml

Website See all products
STANDART ALUMINIUM

Turkey

Standart Aluminium is an innovative and engineering-oriented company that excels in manufacturing high-grade aluminum profiles and delivering comprehensive system solutions, including solar mounting systems and custom designs. Our state-of-the-art facility, sprawling across 25, 000 square meters, empowers us to meet all your needs with efficiency and precision. Equipped with cutting-edge technology, our production facility offers a diverse range of services, such as: •Extrusion •Electrostatic Powder Coating •Anodized Finishing •Mechanical Processing At Standart Aluminium, we take immense pride in our customer-centric approach. Our dedication to continuous improvement has positioned us as industry leaders, always striving for excellence in everything we do. We believe in building lasting relationships with our partners, customers, and employees based on respect and honesty. Our unwavering commitment to integrity fosters an environment of trust and reliability, making us a trusted ally in your projects. To ensure fast, high-quality, and accurate services, we collaborate with renowned brands known for their exceptional material quality and adherence to international standards. This collaboration enables us to deliver reliable and superior solutions. Whether you require tailor-made aluminium profiles or specialized processing services, Standart Aluminium is here to assist you at every step. Contact us for more information!

Website See all products
MAGNITO EU LTD.

Bulgaria

Magnito EU Ltd is a proud Family Business based in Bulgaria. For more than 30 years we have experience in the steel processing. Whether you want to finish a hotel, a training room, office, waiting room, a lounge area, or a cozy gathering space, a clean modern look will impress even the most sophisticated guests. We develop, produce and deliver affordable steel bases and steel legs for the furniture sector. We own a manufacturing plant in Europe and we can guarantee to all our customers high quality and short delivery time. Our engineers and designers use the very latest CAD systems to develop products that are consistent down to the last detail and provide clear practical solutions. Innovations from Magnito Europe are always real solutions for the furniture market. We are flexible to develop and produce all new designs suitable for our customers. After the developing process, in our production we use a modern laser machines – a sheet and a pipe laser. Now we can guarantee that we are cutting the exact profiles for the assembly process. Next step in the production is the welding, finishing and powder coating. All our products are precisely checked before the packing process. For our powder coating line we use equipment from Gema Switzerland GmbH, which is a leading supplier in the area of electrostatic powder coating. The washing machines and the stove are custom made specially for our products. That’s why we can guarentee to all our customers high quality products.

Website See all products
MAHLO GMBH & CO. KG

Germany

Mahlo is among the worldwide leading manufacturers of measuring, control and automation systems for the textile, non-woven, coating and finishing industry as well as the film, extrusion, paper and cardboard sector. Mahlo is based in the Bavarian town of Saal an der Donau, Germany, but has branches in Italy, Belgium, Spain, China and the USA, which provide services to the most important markets. International representative offices and service stations are there to help customers all over the world. Mahlo's product range includes weft straighteners and process controls for textile finishing, pattern recognition and pattern measurement for patterned fabrics, quality control and profile control for coating and processing continuous web fabrics via data management for productions processes, and hand measurement devices. The traditional Bavarian family company, founded by Dr Heinz Mahlo in 1945 and still in the family today, is proud to develop and produce its products exclusively in Germany.

All the products for "finish coat"

Ecopac EMC-15

Optipac VMC-15

mPilot

Ceremat MMZ-12

Samplecut FSC-12

Website See all products
MBW GRUPPE

Germany

The mbw Group, which has been active on the market since 1987, has developed into a leading and reliable supplier of electroplating. Our experience enables us to offer you a service model that covers the complex needs in the field of metal finishing. We develop innovative coating systems in cooperation with our renowned customers from the automotive, manufacturing, hardware and electrical industries. Our core competence is the compatibility of an optimal ratio of the often difficult to reconcile requirements for optics, corrosion protection, functionality and service. Our reliability and proximity to our customers is highly evident from the eight production sites we operate in Germany. This is one of our corporate goals and enables us to react quickly and flexibly. The service portfolio is rounded off by the metal and fixture construction division, with headquarters in Baden-Baden.

Website See all products
KRASS + WISSING GMBH

Germany

Since 1958, we have been quickly, competently and flexibly delivering bands, ribbons and bindings from our warehouse – in over 25 materials and more than 1000 colours. We can offer custom cuts using our customers' materials, and can even create items using materials specially created for our customers. Furthermore, we can offer logistical solutions and technical support for anything related to bands, ribbons and bindings. Cut bindings: The seam-free cotton hose has a warp-thread compression, at which the weft threads change direction during weaving. This thread compression can even be seen in the end product, an intensely coloured stripe running diagonally to the direction of the band. Custom-cut: With custom cutting, we cut our customers' materials and turn these, upon request, into folded ribbon, stitched ribbon and piping. Furthermore, we can finish, coat and print your ordered goods.

Website

VINCO

Spain

Our company supplies steel strip, wire and wire rope internationally. We primarily target the precision parts drop-forging sectors for the automotive and electronics, agri-food and spring industries. We supply high- and low-carbon steel, stainless steel, copper and their alloys as well as aluminium products. Our strip cutting service centre has 10 longitudinal cutting lines and other lines for secondary operations to enable us to deliver planed and burr-free strip on reels. We have an extensive product range, not only in terms of materials, but measurement ranges, surface finishes, coatings and supply options. Our philosophy is service-, customer- and continuous improvement-centred. Our devoted staff ensures that this is achieved.

All the products for "finish coat"

Low-Carbon Steel strip: Continuous hot dip coating. Galvanis

Low-Carbon Steel strip: Continuous hot dip coating. Galvanis

Website See all products
NET D.O.O.

Slovenia

NET Ltd. is a family-run firm dealing with design and manufacturing of sheet-metal products. We offer a one-stop point for addressing customer’s needs: from the design, development, material selection, production, and finish (e.g., powder coating, flocking, galvanizing, polishing). We offer manufacturing of sheet metal, metals and metal components – from idea to final product. We are specialized in CNC punching, stamping and perforation; CNC bending, welding of steel, aluminum, stainless steel, in sheets, tubes, or other forms of metal elements; grinding, drilling, and various other finishing activities. At the customer's request, the product can also be powder-coated, flocked or polished using our own facilities for dry-powder coating and flocking paint shop. Our firm was founded in 1990; with work experience exceeding 30 years, mainly in the manufacturing of metal products such as electronics and heater housings, metal frame doors, furniture (wardrobe frames, beds, table bases, benches), lamp housings, and much more, we are a resourceful and reliable partner in a region. Our partners come from Austria, Germany, Denmark, Italy, France and Slovenia. We are committed to high-quality standards, confirmed also by the certification of ISO 9001: 2015 standard in our firm. Employing a relatively small team of about 20 people allows us to exploit professionalism and efficiency at our work.

Website See all products
SAMES KREMLIN

France

We provide industrial solutions for productivity, quality improvement, material & cost savings. We are designers and manufacturers of process equipment divided into 6 ranges: - Airspray: We have been an Airspray manufacturer since 1925, bringing you the very best in Finishing - Airmix®: We have been the creator of Airmix® since 1975, bringing the perfect mix between quality and productivity - Airless: We provide premium Airless products for finishers with demanding applications - Rexson Dispense: Pumping beyond possible, dispensing precisely - Electrostatic: Expertise for high finishing quality & efficiency - Powder coating solutions for highest Productivity since 1960 With our manual spray guns, automatic and robotic applicators, our wide range of pumps & machines for fluid handling, dosing, mixing & dispensing, we allow you to "Apply Your Skills" for the best performance and productivity possible. Our products pursue the following key objectives for our customers: 1 - Performance: Because finishing & dispensing are key processes in most factories, our products deliver leading performance to reach your quality requirements. 2 - Productivity: Our high capability product ranges provide a real leverage on your industrial investment enabling unknown levels of production output. 3 - Sustainability: Robustness & reliability are standards for our products, as is providing a quick payback while saving significantly on production costs.

See all products
WALTHER TROWAL GMBH&CO.KG

Germany

Since 1931 Walther Trowal has been developing and producing systems for the refinement of surfaces. Initially focusing exclusively on mass finishing – the term “Trowalizing” originated from the company’s cable address “Trommel Walther” – Walther Trowal has continuously expanded its product portfolio. Over time the company has developed a broad range of machinery and systems for mass finishing, shot blasting and coating of mass produced small components. With the invention of new systems like, for example, drag finishing and the development of special finishing methods for 3D printed components, the company has proven its innovative capabilities again and again. Trowal develops and implements complete surface treatment solutions that can be seamlessly integrated into linked production systems existing at the customers. This includes the entire process technology, perfectly adapted to the specific surface finishing requirements of the work pieces: Equipment and the respective consumables always complement each other in a perfect manner. Each individual work piece and each manufacturing process must meet special technical requirements. That is why the experienced process engineers in our test lab, in close cooperation with the customers, develop the optimal process technology for the finishing task at hand. The result: Work piece surfaces that meet exactly the required specification with short processing times and a high degree of consistent, repeatable results.

All the products for "finish coat"

Basket centrifuge - ZM series

Rotating barrels finishing machine - A series

Vibrating dryer - G series

Drag finishing machine - M-TMD series

Small part coating - ROTAMAT

See all products
CODEMAC GMBH

Germany

We have chosen to specialise in trading classic sport boats – known as runabouts – from the 1970s and 1980s. Our main focus here is on Gastron/Glastron Carlson and Hammond boats, Chris Craft, Slickcraft and the like. We also offer everything that accompanies these wonderful classics, like US trailers, classic outboards, vintage instruments and fittings. Furthermore, we refurbish all components – with a gel coat, a Metalflake finish, upholstery, foliation, etc. Last but not least, we reproduce logos and emblems that are no longer available, cast aluminium fittings such as prows, and manufacture acrylic glass windscreens.
FAN-TRADE LLC

Russia

Fan-Trade LLC is a manufacturer of birch plywood and birch veneer - sawn timber for furniture production, interior decoration and construction. The company performs advanced woodworking and produces FK grade birch plywood in sheets of 1525x1525 mm in size and 4 to 24 mm in thickness. Fan-Trade's products comply with the Russian standard GOST 3916.1-18 and are manufactured from birch veneer logs which are harvested from the forest reserves of the Russian Federation and comply with GOST 9462-88. Laminated wood for veneer is produced in grades I, II, III, IV according to the interstate standard GOST 99-2016. The company, located in the Smolensk Oblast (a region of Russia that is 42% forested), has been producing woodworking products since 2020. Constant quality control is carried out at all stages of the plywood production cycle. Fan-Trade's products are environmentally friendly, FK grade plywood is phenol-free and suitable for interior finishing of residential buildings. Coated plywood by Fan-Trade can be used for the production of preformed veneers, flooring, wall panels, construction of outbuildings, production of cabinet furniture, box bottoms and walls, containers, wardrobe backs, children's toys, interior decor and other wood products. The company manufactures semi-finished products for furniture round the clock and continuously enhances production capacity.

See all products
LA NORIA

Spain

After 48 years experience in this sector and thanks to the evolution and development of our manufacturing processes, we at La Noria are proud to offer an extensive range of truly superior quality products as standard to our clients, choose from our wide range of pedalos, kayaks, paddle surf boards and leisure boats. Due to the evolution and development process of La Noria, we have risen to become one of the world leaders in our field, present at all the main trade fairs and international nautical exhibitions, we have become one of the most exclusive nautical manufacturing companies throughout the world. All our products are manufactured using the latest advances in technology, three -ply polyethylene, with the choice of colour integrated during the manufacturing process and finished with a coat of polyethylene to avoid any defects and ensure the best durability in all our products, all of which have to pass our rigorous quality control system throughout the manufacturing process.
SL SLOVAKIA, A.S.

Slovakia

Production of our own products has been for more than 40 years essential scope of ESSEL production. Today we know that quality has been based on tradition, and we are proud of Slovak products. We offer our clients a wide portfolio of our own products to be used in forest industry, towing platforms and recovery systems and equipment for waste disposal. We also offer optimum solutions for handling mechanisms designed for efficient and safe transportation of products or materials. Customer satisfaction is our primary goal. That is also why we seek to understand their needs, so that we can bring innovations in the future to provide for mutual success. We possess complex technological backup, which allows us to implement wide spectre of production, from piece-production of prototypes to production of small series. It starts with a purchase of sheet iron and is followed with a living organism, by which we give the future products their shapes. We split, burn, form, weld, shape, and apply final finish coating. It was these processes that inspired us to create the slogan: Shaping the future

See all products
LEES NEWSOME LTD

United Kingdom

LEES NEWSOME LIMITED is a textile manufacturer. Originally, a weaving and raising operation, the company has expanded into bleaching, dyeing and finishing, knitting, coating and sewing. Fabric ranges: - BRUSHED AND RAISED FABRICS - COFFIN LININGS - CURTAIN LININGS & INTERLININGS - DRILL - EXHIBITION AND DISPLAY FABRICS - MICROFIBRE - PRINT SUBSTRATES - UPHOLSTERY FABRICS ************************************************************************ Member of the LANCASHIRE TEXTILE MANUFACTURERS’ ASSOCIATION
GPS STEEL S.A.L

Lebanon

GPS Steel s.a.l is a family owned company located in Lebanon, with more than 40 years of experience in custom made machining capabilities using the latest tools such as Wire cut, EDM, EDM Drill, CNC Lathe, CNC Milling machines and many other machines.We can basically produce any part that is made of steel, stainless steel, brass, aluminum.GPS Steel has different departments such as mold making and part processing, welding and finishing, powder coating, architectural parts processing, and precision casting.