Accelerometers - Import export

The trak | uplift battery is a lead-acid battery optimized for use in industrial trucks. The coordinated active materials have improved the high-current discharge process and the fast-charging capability. In addition, the pocket separator provides longer cycle life in traction applications and prevents short circuits due to mossing. The pole feed-through with labyrinth system ensures smooth operation while requiring low maintenance. trak | uplift battery is the cost-optimized entry-level model of our trak | uplift series and is ideally suited for single-shift operation due to its durability and cost-effectiveness. Additional accessories, such as electrolyte circulation, can be retrofitted at any time. In summary, trak | uplift is the first choice if you want to minimize your investment costs and make optimum use of your budget.

The RECOVIB® industrial accelerometers bridge the gap between the performance of laboratory accelerometers (which are often expensive, fragile and offer low protection) and the robustness of industrial accelerometers (which are sometimes cheaper but often noisy and inaccurate). Our accelerometers can be deployed in industrial environments for monitoring machinery or structures. The RECOVIB® accelerometers are of proven design and the majority of the models available are widely used in a variety of fields, such as the machine tools, precision machining and on-shore and off-shore wind energy sectors in monitoring or active vibration control applications. INTERNAL SIGNAL CONDITIONING The signals from the vibration sensor are amplified and conditioned by the accelerometer unit itself before being passed to the data acquisition system through a disturbed industrial medium. Our accelerometers are equipped either with a voltage output or a 4-20 mA current output.

This cell is designed for EV industry. 43Ah cell can deliver 140A discharge with only 760gram weight. 174x188x11mm and 760gram

NIOS Micro is a new device in the NIOS product line that is designed to perform Vickers microindentation in the scale range from HV 0.01 to HV 50. It is certified as a measuring instrument and can be used in scientific and industrial laboratories. The device implements algorithms for automatic application of indent arrays and measurement of indent boundaries, which allow performing various measurements depending on the tasks set, as well as determining the depths of surface hardening (SHD, Surface Hardering Depth), carburizing (CHD, Case Hardering Depth) and other characteristics. The design of NIOS Micro is built on the same modular principle as other NIOS hardness testers. If required, NIOS Micro can also be equipped with a nanoindentation module, maximizing the range of forces measured and applicable methods

The low-cost High Temperature ICP®/ IEPE accelerometer, model HT602D01, is ideal for vibration measurements in higher temperature applications, including the paper, plastics and steel industries. These high temperature ceramic shear ICP® accelerometers feature a 2-pin MIL-C-5015 side-exit connector in a low-profile package. They can be used in environments with temperatures up to +325°F/+163°C. The sensing element of these accelerometers provides a sensitivity of (±10%) 100 mV/g (10.2 mV/(m/s²)) with a frequency range of (±3dB) 30 to 480000 cpm (0.5 to 8000 Hz). — Industrial ICP® vibration sensor — Continuous operating temperature up to 163 °C — With through hole — Measuring range 50 g — Sensitivity 100 mV/g — Frequency range 0.8 ... 8,000 Hz — Single-point calibration at 100 Hz — 2-pin connection socket on the side Please contact us directly for an individual offer.

When using vibration transmitters, the vibration evaluation and the fault switch-off are outsourced, i.e. the alarm thresholds are parameterised in a separate evaluation unit or in a PLC that can record the trend development. Transmitters are current loop powered and output a normalised current signal corresponding to the vibration, which is then scaled in the system controller. The vibration transmitters of the 64x series are available with different measuring ranges and quantities (vibration velocity according to ISO 10816, vibration acceleration and vibration displacement, among others) that are related to the respective application. — Vibration transmitter with current output corresponding to the peak value of the vibration velocity — Measuring range 0 ... 12.7 mm/s — Output range 4 ... 20 mA — Frequency range 3 ... 1,000 Hz — 2-pin connection socket on top For an individual offer, please contact us directly.

As with the low-cost sensors, the precision sensors include models with a particularly temperature-stable quartz shear element. Model M628F01 with head connection is used especially in environments with fluctuating environmental conditions and are optionally available with high-temperature electronics for use up to 163 °C. — Industrial ICP®/IEPE accelerometer -Measuring range ±50 g —Sensitivity: 100 mV/g -Frequency range: 0.33 to 12000 Hz -With metric (M) or inch mounting bolt For an individual quotation please contact us directly.

Acceleration sensors with ICP®/IEPE technology are usually used for vibration monitoring. Sensors for series use are particularly suitable if a large number of measuring points are to be monitored. The low-cost sensor models, where the sensor model 627A01 belongs, can be integrated permanently into monitoring systems or used in conjunction with a portable data collector/analyzer for route-based monitoring. The accelerometer presented here, model 602D01, can be used in ambient temperatures up to 121 °C. If the operating conditions require it, this model is also available with EX approval or with SIL-2 declaration. All sensors are supplied with a 1-point calibration according to ISO 17025. — With through hole — Measuring range 50 g — Sensitivity 100 mV/g — Frequency range 0.5 ... 8,000 Hz — Single-point calibration at 100 Hz — 2-pin connection socket on the side Please contact us directly for an individual offer.

In order that the orientation of sensors with lateral cable outlets can beselected as required, a design with a through-hole is usually used. Thanks to the patented Swiveler® mounting system, the sensors of the M607 series can be Swiveler® mounting, the sensors of the M607 series also allow the cable to be aligned. This allows for a smaller design. Thanks to the patented Swiveler® mounting system, the sensors of the M607 series can be Swiveler® mounting, the sensors of the M607 series also allow the cable to be aligned. This allows for a smaller design. — Industrial ICP®/IEPE accelerometer with integrated 3m cable — Measuring range ±50 g — Sensitivity: 100 mV/g — Frequency range: 0.5 to 10000 Hz — With metric (M) or inch mounting bolt — Weight: 31 g For an individual offer, please contact us directly.

For use in harsh industrial environments, special sensors in particularly robust housings must be used. A water- and oil-tight cable connection is also often required, such as that offered by the M608A11 model. To protect against electromagnetic interference, a housing-insulated sensor construction and special amplifier electronics are used. Interference on the cable is also minimised by using twisted pair cables with additional shielding. Typical applications of such sensors include engine and transmission test benches as well as machine endurance test benches. — Industrial ICP®/IEPE accelerometer with integral 3m cable, terminating on cut-off cable -Measuring range ±50 g. — Sensitivity: 100 mV/g — Frequency range: 0.5 to 10000 Hz — With metric (M) or imperial mounting bolt For an individual quotation please contact us directly.

Cost-effective industrial ICP®/ IEPE accelerometers are ideal for fixed installations and use in continuous on-line monitoring systems. This improves safety when installed in hazardous or inaccessible locations. Connection can be made via switches or junction boxes for route-based data acquisition systems. The Model 601A01 is suitable as a low-cost industrial ICP®/ IEPE accelerometer for a general purpose. It has a very good signal-to-noise ratio and a ceramic sensing element. The low-cost ICP®/ IEPE accelerometers have an economical design and are ideal for fixed mounting. Their rugged stainless steel housing with hermetic sealing and housing-isolated electronics, eliminate noise problems. — Industrial ICP® vibration sensor — Measuring range 50 g — Sensitivity 100 mV/g — Frequency range 0.27 ... 10,000 Hz — Single-point calibration at 100 Hz — 2-pin connection socket on top For an individual offer, please contact us directly.

The low cost industrial ICP® / IEPE vibration sensor, model 601A02, is suitable for slow speed applications such as slow moving roller element bearings in a paper mill. Increasing the sensitivity of the sensor to 500 mV/g can improve the signal resolution in these applications. Despite their economical name, low-cost accelerometers are ideal for applications where the sensors are permanently mounted to collect vibration data 24/7, monthly or even quarterly. Low-cost accelerometers are all hermetically sealed in stainless steel housings and most are covered by IMI Sensors' Lifetime Warranty Plus programme. — Industrial ICP® vibration sensor — Measuring range 10 g — Sensitivity 500 mV/g — Frequency range 0.17 ... 10,000 Hz — Single point calibration at 100 Hz — 2-pin connection socket on top For an individual offer, please contact us directly.

The sensor model M625B01 with side connection is suitable for a wide variety of standard applications with a measuring range of 50 g. The industrial precision sensors operate in the frequency range up to 15 kHz and can be used in an ambient temperature up to 121 °C. Acceleration sensors with a low lower limit frequency and high sensitivity are available for monitoring very slowly rotating machines. For these models, the discharge time constant has been extended so that the sensor can be used at speeds below 12 rpm (0.2 Hz). —Measuring range ±50 g -Sensitivity: 100 mV/g -Frequency range: 0.33 to 12000 Hz - 2-pin connector on top -With metric (M) or inch mounting bolt For an individual quotation please contact us directly.

Current loop powered vibration transmitters enable cost-effective and permanent monitoring of machine vibrations. They provide a standardised 4 ... 20 mA output signal, which is proportional to the RMS or peak value of the measured vibration amplitude. The transmitters are connected to existing, free inputs of a PLC or a process control system. These then issue a warning message when a preset vibration level is exceeded or switch off the machine in an emergency. — Measuring range 0 ... 25.4 mm/s — Output range 4 ... 20 mA — Frequency range 3 ... 1,000 Hz — 2-pin connection socket on top. For an individual offer, please contact us directly.

The sensor model M622B01 with head connection is suitable for a wide range of standard applications with a measuring range of 50 g. The industrial precision sensors operate in the frequency range up to 15 kHz and can be used in an ambient temperature up to 121 °C. — Industrial ICP®/IEPE Accelerometer — Measuring range ±50 g — Sensitivity: 100 mV/g — Frequency range: 0.2 to 15000 Hz — With metric (M) or inch mounting bolt For an individual quotation please contact us directly.

The ideal vibration data logger for capturing and monitoring vibrations, shocks, and impacts. With superior battery life and up to 128 GB of memory, the ReLog is the perfect tool for monitoring vibrations in most environments. It has been designed to be extremely easy to handle and by the touch of a button, you will be up and running and measuring with up to 25,000 Hz sampling rate. This equals to more than 60 billion data points! With its waterproof housing (IP67) there really are very few limitations to where you can use the ReLog! And when you’re done measuring the included software will make sure you have perfectly structured files that are easy to analyze and work with.

Our innovative measurement system allows for vibration measurements to be taken of whole-body vibration exposure according to ISO 2631. Its autonomous sensors that do not need to be wired during measurements and automated artefact detection provide for a user-friendly implementation and use (can be used by non-experts). Stored data is downloaded from the sensor(s) at the end of the working period to a smartphone or a PC using a Bluetooth connection. The software allows for the automatic computation and display of workers’ exposure to whole-body vibrations and indicates how such exposure compares with the limit and action values defined in the vibration Directive. The set of whole-body vibration meters (Vib@Work Seat, Vib@Work Floor & Vib@Work Detect) can measure the vibration exposure of either seated or standing operators. In addition, when used in conjunction, seat efficiency can also be measured (i.e. S.E.A.T. factors).

Those dual axis inclinometers are designed to measure very small changes from the vertical level, either on the ground or in structures. They exhibit high resolution and low thermal drift. Their mechanical design and enhanced internal surge protection make them particularly useful for the permanent outdoor monitoring of structures being subjected to various influences such as loading and foundation settlement.TYPICAL USE Off-shore wind turbine foundations Bridges and piers Historical buildings Structural load testing Vessel and pontoon roll and pitch measurement Crane roll and pitch measurement Structural Health Monitoring FEATURES Biaxial High accuracy and resolution Excellent thermal stability 4-20 mA current loops for signal immunity and potentially long cable runs Enhanced surge protection Internal temperature sensor for residual thermal drift compensation Two models for horizontal or vertical mounting Easy to install

Usually, acceleration sensors with ICP®/IEPE technology are used for vibration monitoring. Sensors for series use are particularly suitable if a large number of measuring points are to be monitored. The low-cost sensor models, where the sensor model 627A01 belongs, can be integrated permanently into monitoring systems or used in conjunction with a portable data collector/analyzer for route-based monitoring. The accelerometer presented here, model 627A01, can be used in ambient temperatures up to 121 °C. If the operating conditions require it, this model is also available with EX approval or with SIL-2 declaration. All sensors are supplied with 1-point calibration according to ISO 17025. The industrial accelerometer, model 627A01, is equipped with a quartz sensing element. — Measuring range 50 g — Sensitivity 100 mV/g — Frequency range 0.33 ... 10,000 Hz — Single-point calibration at 100 Hz — 2-pin connection socket on top For an individual offer, please contact us directly

The 603C01 ICP® is one model in a very diverse line of 603-Series accelerometers. The 603-Series includes alternative sensitivity models, hazardous area approved models, dual output models and models with an integral cable. For monitoring systems with many input channels, robustness, reliability and a favourable sensor price are of great importance. Low-cost sensors with ICP®/IEPE technology are used when a large number of measuring points are to be continuously monitored and an evaluation of the vibration spectrum is required. is required. — Industrial ICP®/IEPE vibration sensor — Measuring range 50 g — Sensitivity 100 mV/g — Frequency range 0.5 ... 10,000 Hz — Single-point calibration at 100 Hz — 2-pin connection socket on top — With metric (M) or inch mounting bolt If you have any further questions about this sensor model, please do not hesitate to contact us. We will be pleased to help you.