Accelerometers - Import export

The trak | uplift battery is a lead-acid battery optimized for use in industrial trucks. The coordinated active materials have improved the high-current discharge process and the fast-charging capability. In addition, the pocket separator provides longer cycle life in traction applications and prevents short circuits due to mossing. The pole feed-through with labyrinth system ensures smooth operation while requiring low maintenance. trak | uplift battery is the cost-optimized entry-level model of our trak | uplift series and is ideally suited for single-shift operation due to its durability and cost-effectiveness. Additional accessories, such as electrolyte circulation, can be retrofitted at any time. In summary, trak | uplift is the first choice if you want to minimize your investment costs and make optimum use of your budget.

The low-cost High Temperature ICP®/ IEPE accelerometer, model HT602D01, is ideal for vibration measurements in higher temperature applications, including the paper, plastics and steel industries. These high temperature ceramic shear ICP® accelerometers feature a 2-pin MIL-C-5015 side-exit connector in a low-profile package. They can be used in environments with temperatures up to +325°F/+163°C. The sensing element of these accelerometers provides a sensitivity of (±10%) 100 mV/g (10.2 mV/(m/s²)) with a frequency range of (±3dB) 30 to 480000 cpm (0.5 to 8000 Hz). — Industrial ICP® vibration sensor — Continuous operating temperature up to 163 °C — With through hole — Measuring range 50 g — Sensitivity 100 mV/g — Frequency range 0.8 ... 8,000 Hz — Single-point calibration at 100 Hz — 2-pin connection socket on the side Please contact us directly for an individual offer.

As with the low-cost sensors, the precision sensors include models with a particularly temperature-stable quartz shear element. Model M628F01 with head connection is used especially in environments with fluctuating environmental conditions and are optionally available with high-temperature electronics for use up to 163 °C. — Industrial ICP®/IEPE accelerometer -Measuring range ±50 g —Sensitivity: 100 mV/g -Frequency range: 0.33 to 12000 Hz -With metric (M) or inch mounting bolt For an individual quotation please contact us directly.

Acceleration sensors with ICP®/IEPE technology are usually used for vibration monitoring. Sensors for series use are particularly suitable if a large number of measuring points are to be monitored. The low-cost sensor models, where the sensor model 627A01 belongs, can be integrated permanently into monitoring systems or used in conjunction with a portable data collector/analyzer for route-based monitoring. The accelerometer presented here, model 602D01, can be used in ambient temperatures up to 121 °C. If the operating conditions require it, this model is also available with EX approval or with SIL-2 declaration. All sensors are supplied with a 1-point calibration according to ISO 17025. — With through hole — Measuring range 50 g — Sensitivity 100 mV/g — Frequency range 0.5 ... 8,000 Hz — Single-point calibration at 100 Hz — 2-pin connection socket on the side Please contact us directly for an individual offer.

In order that the orientation of sensors with lateral cable outlets can beselected as required, a design with a through-hole is usually used. Thanks to the patented Swiveler® mounting system, the sensors of the M607 series can be Swiveler® mounting, the sensors of the M607 series also allow the cable to be aligned. This allows for a smaller design. Thanks to the patented Swiveler® mounting system, the sensors of the M607 series can be Swiveler® mounting, the sensors of the M607 series also allow the cable to be aligned. This allows for a smaller design. — Industrial ICP®/IEPE accelerometer with integrated 3m cable — Measuring range ±50 g — Sensitivity: 100 mV/g — Frequency range: 0.5 to 10000 Hz — With metric (M) or inch mounting bolt — Weight: 31 g For an individual offer, please contact us directly.

For use in harsh industrial environments, special sensors in particularly robust housings must be used. A water- and oil-tight cable connection is also often required, such as that offered by the M608A11 model. To protect against electromagnetic interference, a housing-insulated sensor construction and special amplifier electronics are used. Interference on the cable is also minimised by using twisted pair cables with additional shielding. Typical applications of such sensors include engine and transmission test benches as well as machine endurance test benches. — Industrial ICP®/IEPE accelerometer with integral 3m cable, terminating on cut-off cable -Measuring range ±50 g. — Sensitivity: 100 mV/g — Frequency range: 0.5 to 10000 Hz — With metric (M) or imperial mounting bolt For an individual quotation please contact us directly.

Cost-effective industrial ICP®/ IEPE accelerometers are ideal for fixed installations and use in continuous on-line monitoring systems. This improves safety when installed in hazardous or inaccessible locations. Connection can be made via switches or junction boxes for route-based data acquisition systems. The Model 601A01 is suitable as a low-cost industrial ICP®/ IEPE accelerometer for a general purpose. It has a very good signal-to-noise ratio and a ceramic sensing element. The low-cost ICP®/ IEPE accelerometers have an economical design and are ideal for fixed mounting. Their rugged stainless steel housing with hermetic sealing and housing-isolated electronics, eliminate noise problems. — Industrial ICP® vibration sensor — Measuring range 50 g — Sensitivity 100 mV/g — Frequency range 0.27 ... 10,000 Hz — Single-point calibration at 100 Hz — 2-pin connection socket on top For an individual offer, please contact us directly.

The sensor model M622B01 with head connection is suitable for a wide range of standard applications with a measuring range of 50 g. The industrial precision sensors operate in the frequency range up to 15 kHz and can be used in an ambient temperature up to 121 °C. — Industrial ICP®/IEPE Accelerometer — Measuring range ±50 g — Sensitivity: 100 mV/g — Frequency range: 0.2 to 15000 Hz — With metric (M) or inch mounting bolt For an individual quotation please contact us directly.

The sensor model M625B01 with side connection is suitable for a wide variety of standard applications with a measuring range of 50 g. The industrial precision sensors operate in the frequency range up to 15 kHz and can be used in an ambient temperature up to 121 °C. Acceleration sensors with a low lower limit frequency and high sensitivity are available for monitoring very slowly rotating machines. For these models, the discharge time constant has been extended so that the sensor can be used at speeds below 12 rpm (0.2 Hz). —Measuring range ±50 g -Sensitivity: 100 mV/g -Frequency range: 0.33 to 12000 Hz - 2-pin connector on top -With metric (M) or inch mounting bolt For an individual quotation please contact us directly.

Current loop powered vibration transmitters enable cost-effective and permanent monitoring of machine vibrations. They provide a standardised 4 ... 20 mA output signal, which is proportional to the RMS or peak value of the measured vibration amplitude. The transmitters are connected to existing, free inputs of a PLC or a process control system. These then issue a warning message when a preset vibration level is exceeded or switch off the machine in an emergency. — Measuring range 0 ... 25.4 mm/s — Output range 4 ... 20 mA — Frequency range 3 ... 1,000 Hz — 2-pin connection socket on top. For an individual offer, please contact us directly.

The low cost industrial ICP® / IEPE vibration sensor, model 601A02, is suitable for slow speed applications such as slow moving roller element bearings in a paper mill. Increasing the sensitivity of the sensor to 500 mV/g can improve the signal resolution in these applications. Despite their economical name, low-cost accelerometers are ideal for applications where the sensors are permanently mounted to collect vibration data 24/7, monthly or even quarterly. Low-cost accelerometers are all hermetically sealed in stainless steel housings and most are covered by IMI Sensors' Lifetime Warranty Plus programme. — Industrial ICP® vibration sensor — Measuring range 10 g — Sensitivity 500 mV/g — Frequency range 0.17 ... 10,000 Hz — Single point calibration at 100 Hz — 2-pin connection socket on top For an individual offer, please contact us directly.

Usually, acceleration sensors with ICP®/IEPE technology are used for vibration monitoring. Sensors for series use are particularly suitable if a large number of measuring points are to be monitored. The low-cost sensor models, where the sensor model 627A01 belongs, can be integrated permanently into monitoring systems or used in conjunction with a portable data collector/analyzer for route-based monitoring. The accelerometer presented here, model 627A01, can be used in ambient temperatures up to 121 °C. If the operating conditions require it, this model is also available with EX approval or with SIL-2 declaration. All sensors are supplied with 1-point calibration according to ISO 17025. The industrial accelerometer, model 627A01, is equipped with a quartz sensing element. — Measuring range 50 g — Sensitivity 100 mV/g — Frequency range 0.33 ... 10,000 Hz — Single-point calibration at 100 Hz — 2-pin connection socket on top For an individual offer, please contact us directly

The 603C01 ICP® is one model in a very diverse line of 603-Series accelerometers. The 603-Series includes alternative sensitivity models, hazardous area approved models, dual output models and models with an integral cable. For monitoring systems with many input channels, robustness, reliability and a favourable sensor price are of great importance. Low-cost sensors with ICP®/IEPE technology are used when a large number of measuring points are to be continuously monitored and an evaluation of the vibration spectrum is required. is required. — Industrial ICP®/IEPE vibration sensor — Measuring range 50 g — Sensitivity 100 mV/g — Frequency range 0.5 ... 10,000 Hz — Single-point calibration at 100 Hz — 2-pin connection socket on top — With metric (M) or inch mounting bolt If you have any further questions about this sensor model, please do not hesitate to contact us. We will be pleased to help you.