Compressed-air motors - Import export

The worm gear winches as from 1000kg and up can also be driven by means of a portable air motor. The motor can be easily attached to the drive shaft. When there are more than one worm gear winches situated on one particular location, only one air motor is needed to drive them.

The Motor MD1xL is suitable for viscous, highly flammable, combustible liquids up to 100,000mPas. With the oil-free, 1000 Watt powerful Compressed air motor you can achieve the same flow rate as comparable products with 20% less connection pressure and 4% less air consumption. . Optionally with comfort handle . Explosion-proof Motor according to ATEX guidelines . Oil-free usable Features & Advantages . High performance and high efficiency due to optimised flow guidance . Very good handling due to low weight . Long service life . Very good starting behaviour . High energy efficiency

The industrial version of the progressive cavity pump HD-E-SR transfers the advantages of the drum pump to highly viscous media. With its easily detachable design and small outer diameter (max. 41 mm), it enables the filling of viscous liquids up to 30,000 mPas. The pump is easy to dismantle and clean and can be combined with electric or compressed air motors to facilitate the emptying of liquids and conserve resources. * Also available in special immersion depths * Examples of media: Oils, glucoses, waste oils, disposal liquids, * Optionally driven by electric or compressed air motors * Uniform volume flow * Lightweight and versatile due to low motor weight * Continuous, low-pulsation delivery of up to 15 litres/min * Low wear and tear * Easily detachable outer tube

The Pure version of the progressive cavity pump HD-E-SR transfers the advantages of the drum pump to highly viscous media. With an easily detachable design and an outer diameter of max. 41 mm, it enables the filling of viscous liquids up to 30,000 mPas. The pump is easy to dismantle and clean, can be combined with electric or compressed air motors and thus ensures the emptying of liquids, which conserves important resources. * Also available in special immersion depths * Examples of media: viscous cosmetic products, foodstuffs, etc. * Optionally driven by electric or compressed air motors * Light and versatile due to low motor weight * Continuous, low-pulsation delivery of up to 15 litres/min * Low wear and tear * Easily detachable outer tube

The pump-kit MINIFLUX is designed for emptying IBCs via their floor-level outlet. Designed as an alternative to a vertical pump, the MINIFLUX can be used when an IBC is not accessible from the top. It is suitable for applications when gravity draining via the outlet tap is insufficient e.g. rapid dispensing or transfer to another container in a higher location. Power can ideally be provided by a commutator or compressed air motor. Product attributes: - For pumping out of IBCs directly from the outlet (with standard S60 x 6 thread) - Simple connection of the pump to the outlet by union nut - Compact design - Can be dismantled into two parts via clamp - Low overall weight of 1.2 kg - No need to mount pump to top of container - Does not require access to the container from above - Ideally combined with commutator motor or compressed-air motor Benefits: - Can be used where ceilings are low - Allows pumping directly from floor-level outlets, even when containers are stacked

Pre-assembled pump kit to pump high flammable media out of 200 l drums or IBCs. Comprising drum pump F 424, outer tube in stainless steel, hose, hand nozzle and compression gland. As drive either the commutator motor F 460 or compressed-air motor F 416 are available. Product attributes: - No seal in the liquid area - Ex protected - Free from wear - Relief openings provide the same fluid level inside the pump compared to the drum content Benefits: - Non-sensitive to dry-running - No seal wear - No bearing wear - No contamination of the medium from lubricants or wear of seal materials possible - Medium cannot be contaminated by lubricants - Low wear and maintenance - Built to last - For use in hazardous area - Motor also available with speed control

For driving the FLUX pump a wide range of electrical to pneumatic motors is available. Even if you work in hazardous areas or with flammable liquids. Depending on the application, different pumps can be driven by different motors. Thus, the output of a drum pump depends, among other things, on the power of the motor. Here you will find the most economical and safest drive solution for your application. Battery motor: FBM-B 3100 Commutator motors: FEM 3070 FEM 4070 F 457 F 458 F 460 Ex Compressed-air motors: F 416 Ex FPM

The eccentric worm-drive pump B70V-SR (with reduction gear) in PURE design is suitable for pumping water-like to highly viscous media with and without fibres or solids. Depending on the application, various electric and compressed air motors are available, which you can combine with the pumping unit at any time. This gives you flexibility at all times and saves important resources. * Also available in special immersion depths * Examples of media: viscous cosmetic products, foodstuffs, etc. * Uniform volume flow * Gentle, low-pulsation product conveyance * Low wear and tear * Ideal for mobile use * Approved in accordance with ATEX Directive 2014/34/EU, category 1/2

The horizontally installed, compact container pump MINIFLUX is designed for emptying IBCs via their floor-level outlet. Designed as an alternative to a vertical pump, the MINIFLUX can be used when an IBC is not accessible from the top. It is suitable for applications when gravity draining via the outlet tap is insufficient e.g. rapid dispensing or transfer to another container in a higher location. Power can ideally be provided by a commutator or compressed air motor. Benefits: - Can be used where ceilings are low - Allows pumping directly from floor-level outlets, even when containers are stacked - Significantly higher flow rate and pressure compared to draining by gravity - Minimal space requirement - Simple disconnection from IBC with union nut - Delivery against closed valve (e.g. hand nozzle, flap valve etc.) possible - Suitable for use in hazardous areas zone 1

Eccentric screw pump tube B70V-SR Industrywith reduction gear for electric motors For pumping highly flammable liquids and for use in "Zone 0", use Pump tubes with mechanical seal (GLRD), cardan shaft (GW) and PTFE stator. The Eccentric screw pump B70V-SR 12.1 (with reduction gear) in the industrial version is suitable for pumping water-like to highly viscous media with and without fibrous or solid materials. Depending on the application, various compressed air and electric motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources. * PTO shaft versions also available in special immersion depths of 500 - 2000 mm * Media examples: viscous mineral oils, resins, emulsions, paints and many other thick materials * Uniform volume flow * Easy and fast cleaning * Gentle, low-pulsation product delivery * Low wear * Ideal for mobile use

The ASO 300 is used for deburring and rounding off edges on workpieces made of steel, stainless steel, aluminum and other materials. It is suitable for processing drill holes and openings starting with an internal diameter of 7.0 mm. The compact construction and the low weight offer wonderful ergonomics. The machine is equipped with a powerful and reliable pneumatic drive. The chamfer size can be set precisely through a scale. Advantages: For 45° chamfers and for rounding edges Bores starting at Ø = 7 mm can be processed Can be used for straight edged and contours Reliable compressed air motor Compact and light (500g) construction Insert milling cutter for efficient chamfering One-handed operation Safety lever valve

Poppe + Potthoff Maschinenbau GmbH supplies compressor units and pressure control systems of up to 400 bar for various gases. We offer ready-to-connect units to increase the existing pressure for pneumatic and hydraulic applications. In this way, the performance of existing systems can be increased flexibly and efficiently. Our compressor units are used wherever the existing system pressure is insufficient to implement specific applications. Of course, our systems are UL or CE compliant as required. In addition, we offer you service and support directly on-site.

- Made of polyamide (PA) - Color black (red, blue, green, yellow, natural, brown, orange and grey: specify when placing order; subject to extra charge) - External calibration; for use with Eisele plug connectors - Temperature range -76 to 212 °F (-60 to +100 °C) - Suitable for vacuum - Free of PWIS and halogen - Suitable for fuel - For automotive industry according to DIN 73378 - Drag chain compliant

AAF compressed air filters are designed for the protection of the downstream compressed air system and equipment with lower airflows against defects and other failures. They ensure high efficient removal of solid particles, water, oil aerosols, hydrocarbons, odour and vapours from compressed air systems up to 16 bar. Required compressed air quality according to standard ISO 8571-1 can be achieved with 5 different grades of filter elements (P, R, M, S and A). Optional internal and external condensate drains should be used for efficient condensate draining from the filter housing.< /br> <b>Features</b> <ul> <li>A wider range of different models for different flow rates, including larger 2” and 3” sizes. </li> <li>Convenient design for assembly of several filters and for wall mounting</li> <li>AVELOCK antivibration element lock system<li> <li>Needle felt drainage layer instead of foam for improved thermal resistance<li> <li>X2-COAT internal anti-corrosion protection<li> </ul>

Gast Lubricated Air Motors are designed to thrive in harsher environments such as hazardous and extreme ambient temperature locations. Their lubrication protects internal components and helps remove smaller particulate, which can evade filtration, while also providing heat dissipation benefits. Compact and portable in design, the wide range of motors are offered with variable operating speeds and power outputs which can be adjusted to meet the precise needs of your application. As well as being cost effective over electric motor controls, their air throttling and pressure control can be stalled or overloaded for long periods without damaging the motor. The non-lubricated corrosion resistant air motors by Gast are available in hub or foot mounting configurations and can operate in any position, providing complete system flexibility.