Cutting fluid - Import export

Different type of semisynthetic metalworking fluids used for the machining of cast iron, steel, copper, brass and aluminium metals composed of base oil, esters, corrosion inhibitors, EP/AW additives and biocides

Maxant® WORK is a highly effective silicone antifoam emulsion. It offers excellent foam control and high stability in various foaming systems. Maxant® WORK is stable under extreme condition with low concentrations. Maxant® WORK is suitable for fully-synthetic working fluids and emulsion type working fluids. Permanent foam cut off Rapid foam knock-down Long durability in acidic and alkaline conditions Outstanding durability at low add on levels Excellent foam control Keep the initial performance Shear Stability Maxant® WORK is mainly designed for preventing foam in process applications. Maxant® WORK can be added directly into the foam solution. 1-20ppm is suitable for application.

Maxant® WORK is a highly effective silicone antifoam emulsion. It offers excellent foam control and high stability in various foaming systems. Maxant® WORK is stable under extreme condition with low concentrations. Maxant® WORK is suitable for fully-synthetic working fluids and emulsion type working fluids Permanent foam cut off Rapid foam knock-down Long durability in acidic and alkaline conditions Outstanding durability at low add on levels Excellent foam control Keep the initial performance Shear Stability Maxant® WORK is mainly designed for preventing foam in process applications. Maxant® WORK can be added directly into the foam solution. 1-20ppm is suitable for application.

Through the process of briquetting, the value of residual metals can be increased considerably. The value of residual metals can be increased considerably. A further advantage is the recovery of expensive cutting fluids that can be pressed out of wet chips and then reused. When melting briquettes, combustion is significantly lower and results in a higher melting yield than with loose chips. Depending on the need, our briquette systems are equipped with hydraulic motors between 4 and 90 kW. They will achieve a specific pressure of up to 5,000 kg/cm². Suitable for aluminium, steel, cast iron, copper and many other metals Advantages: - Heavy reduction of volume, reducing storage and transportation costs - Recycling of expensive cooling lubricants - Recipients often pay a better price for loose millings - Minimal burn-off and increased glaze recovery thereby For throughput rates between 30 and 4,800 kg/hr.

Soluble Cutting Fluid is a high-quality, chlorine-free cutting oil enriched with borates. It is engineered to excel in light to moderate machining operations, covering a wide range of tasks such as boring, milling, drilling, tapping, threading, broaching, turning, reaming, and grinding. This cutting fluid is known for forming dependable and stable white emulsions with a generous “emulsion reserve.” It showcases remarkable resistance to bacterial degradation, ensuring a longer service life. Importantly, it contains no free phenolics or nitrites. Additionally, it exhibits minimal foaming tendencies when applied in various machining applications, making it a reliable choice for precision operations.

Biocut 3755 Soluble Cutting Fluid is a highly adaptable, all-around, semi-synthetic solution designed for machining and grinding processes. It proves to be effective for a diverse array of metal removal tasks, catering to both ferrous and aluminum alloys.

RX80 Gear Oil stands as a cutting-edge manual transmission fluid meticulously engineered to deliver smoother gear transitions across a broad spectrum of temperatures. It is compatible with the manual transmissions found in numerous vehicle models from various manufacturers. Notably, RX80 Gear Oil exhibits exceptional adaptability in cold climates. It minimizes the resistance during initial use, while also effectively managing transmission noise and idling vibrations during regular operation. RX80 Gear Oil provides: Reduced transmission noise for quieter operations. Effortless shifting in low temperatures. Enhanced longevity of gear teeth and bearings. Consistent lubrication performance across a wide range of operating temperatures. Exceptional wear resistance, ensuring a strong and protective film throughout the lubricant’s lifespan. Minimal friction in 2-stroke motorcycle gearboxes.

Suction Pumps are self-priming following the initial priming, and operate according to the bypass duct principle. We recommend pump models featuring bronze body elements for pumping water without anticorrosion additives. The dimensions are based on standard specification EN 12157. Impellers: open Fluids: coolants, cooling/cutting oils, fuel oil, water (with anticorrosive additive) Volumetric delivery: up to 52 l/min Delivery head: up to 16 m Please contact us for delivery quantity

Up to 50% Coolant Saving Up to 90% Saving in Disposal Improved price for swarf without coolant Improved Housekeeping The Wogaard Coolant Saver collects the cutting-fluid that is normally wasted through the machine tools automatic chip conveyor. The cutting fluid is reclaimed from the chip-container and returned to the machine tool's main tank for re-use. Wogaard can help reduce consumption of cutting fluid and water, reduce the amount of waste fluid collected and disposed of and end fluid leaks that create potential health and safety issues. The Wogaard Coolant Saver is easy to install and is virtually maintenance free. It is driven by the machine tool's onboard coolant pump, so no external energy source is required. Building on the success of the Coolant Saver, Wogaard now also produce an Oil Saver for liquids up to 32 centistokes viscosity. This is recommended for sliding head machines and can be used in any application where neat oil is used.

High collection capacity relative to size No reduction in pressure or flow Easy clean Rapid return on investment Eclipse Magnetic Filtration produce a range of products to filter ferrous materials from your CNC machine's cutting fluids and oils. Magnetic filtration is a positive contribution to companies' environmental policies and ISO 14001 accreditation. Magnetic filtration requires no consumable or disposable products. It extracts 100% of ferrous contamination, drastically reducing the use of disposable filter media. Eclipse Micromag is a compact magnetic filter for standard machine filtration and smaller wash stations. Micromag is compact in size but has massive holding capacity. Units hold 1kg, 2kg, and 4kg of contamination respectively. Micromag is available in a range of sizes to suit a range of applications up to a pressure of 80 bar and a temperature of 140 degrees. Specific Micromag units are selelcted for an application based on required flow rate

Series V 600 - 1100 IS The HEINKEL Vertical De-oiling Centrifuge V 600 – 1100 IS is designed and built for the separation of cutting fluids and coolants from steel, cast and metal chips. Special properties for the customer’s benefit: Recovery of liquids and oil from chips produced by processing centres and from plastic pellets Simple and rugged design

PRODUCT INFORMATION It is used for the processing of slots for locks, drilling handles, triple, hinges, espagnolette holes and opening water drain slot on PVC and aluminum profiles Copy fitting operates manually and the figures on the template are machined at 1:1 ratio The aluminum profiles up to 3 mm of wall thickness can be machined with a strong spindle motor The cutting fluid controlled with a joystick is sprayed to the milling spot Slots in varied lengths and widths can be opened without using the copy milling template The length of the water drain slot is adjustable on the template Copy milling motor is directly controlled via joystick Reference stops at 2 sides of the milling machine Standard equipped with inlet-outlet conveyor Ergonomic hand control unit On the horizontal axis there is triple hole drilling mechanism Pneumatically working water slot opening system STANDARD ACCESSORIES Ø 5mmx L :80mm of router bit Air gun 2 x profile stops both left and right

PRODUCT INFORMATION It is used for the processing of slots for locks, drilling handles, hinges, espagnolette holes and opening water drain slot on aluminum profiles up to 3 mm of thickness. Copy fitting operates manually and the figures on the template are machined at 1:1 ratio The aluminum profiles up to 3 mm of wall thickness can be machined with a strong spindle motor The cutting fluid controlled with a joystick is sprayed to the milling spot Slots in varied lengths and widths can be opened without using the copy milling template The length of the water drain slot is adjustable on the template Copy milling motor is directly controlled via joystick Reference stops at 2 sides of the milling machine Standard equipped with inlet-outlet conveyor Ergonomic hand control unit STANDARD ACCESSORIES • Ø 5mmx L :80mm of router bit • Air gun • 2 x profile stops both left and right • Spray tool lubrication system • 2x horizontal clamps OPTIONAL ACCESSORIES • Additional router bits

The use of filtration materials and systems in the field of industrial applications and the use of filter in the producing industries claim filter as well as filter systems on the highest degree. New fiber types with different surface modifications in a new combination, united in the innovative polymer fiber filter FIBALON®tool, offering unique and outstanding filtration results. By optimizing our developed dynamic fiber fixation DyFix® and a particle-dependent fiber geometry, we can now also offer our worldwide unique polymer fiber filter for the industrial use. For example in metal band saws to protect the pump or for the treatment of cooling lubricants and also for cutting fluids (e.g. in CNC machines) is FIBALON®tool with its highly durable special fiber combination an inexpensive alternative with improved filtration efficiency compared to conventional systems such as centrifuges or belt filter systems.

Oil dedicated for grinding, profile grinding, sharpening and honing on ferrous metals   

Top of range product for all difficult applications, all types of metal. Very efficient.

Micro-emulsion fluids, each designed for specific metals

Difficult machining and grinding.

Classical machining, brass bar turning. Works well on fine carbon steels.

Lubrication of cutting operations for multiple metals and machine tools.

High performance biodegradable-based neat cutting lubricant

English | Deutsch | Español | Português | Français | Italiano | Русский Visit our website for information in your language. Laser-Lotion PROTEC LC20A Anti-spatter agent PROTEC LC20A is optimised to protect sheet metal panels, pipes, profiles and equipment (supports). Protects any type of metal surface from spatter (steel, stainless steel, aluminium, etc.) No silicone, non-flammable and biodegradable. Laser-Lotion PROTEC LC20A ensures increased quality by preventing spatter, providing dry and clean metal surfaces, no reworking required, as well as higher productivity of the laser system as the beam moves more easily following penetration. Another customer benefits are reduction of cleaning efforts and longer lifetime for the grating (support bars) of the flatbed laser system. • No residue and a particularly low level of emissions • Process safety, also during follow-up processes (vibratory finishing, welding, etc.) • Suitable for all conventional coating