Dampers - Import export

Crane Installations Energy capacity 450 Nm/cycle Stroke max. 62 mm For even more protection: The profile dampers from the TC range of the ACE TUBUS-Series can also be used as safety dampers. These maintenance-free, ready-to-install damping elements made of co-polyester elastomer have been specially developed for use in crane systems and fulfil the international industry standards OSHA and CMAA. In the special TC-S design, managed to achieve the spring rate required for crane systems with the unique dual concept. Whether TC-S or TC, this range of models represents a cost-effective solution with high energy absorption for energy management systems. The very small and light design of Ø 64 mm to Ø 176 mm progressively covers energy absorption within a range of 450 Nm to 17,810 Nm.

Partial Rotation Angle, Adjustable Damping torque 2 - 10 Nm The damping direction of the adjustable FYT-H1 and FYT-H1 can be right, left or two-sided rotation. During each reverse movement of the unilateral decelerating versions there is a certain return damping torque that depends on the size. The brakes have a particularly robust zinc die-cast body and shafts made of steel. ACE rotary dampers are maintenance-free and ready-to-install.

Partial Rotation Angle, Adjustable Damping torque 2 - 10 Nm The damping direction of the adjustable FYT-H1 and FYT-H1 can be right, left or two-sided rotation. During each reverse movement of the unilateral decelerating versions there is a certain return damping torque that depends on the size. The brakes have a particularly robust zinc die-cast body and shafts made of steel. ACE rotary dampers are maintenance-free and ready-to-install.

Partial Rotation Angle, Adjustable Damping torque 2 - 10 Nm The damping direction of the adjustable FYT-H1 and FYT-H1 can be right, left or two-sided rotation. During each reverse movement of the unilateral decelerating versions there is a certain return damping torque that depends on the size. The brakes have a particularly robust zinc die-cast body and shafts made of steel. ACE rotary dampers are maintenance-free and ready-to-install.

Adjustable Compression Force max. 1,800 N Stroke 50 mm High quality and long service life: The HB model of hydraulic damper can also be used as single or double acting brake. Its coated body in a slim gas spring design and the piston rods with wear-resistant surface coating are features of high quality and long service life. The maintenance free, ready-to-install and closed systems provide a constant feed rate and are adjustable, and the control segment on the piston makes adjustment at the end position child’s play. Thanks to many add-on components the assembly is easy to mount, so that the damper can be universally deployed for damping back and forth swinging masses, such as in power or free conveyors.

Adjustable Compression Force max. 800 N Stroke 25 mm High quality and long service life: The HB model of hydraulic damper can also be used as single or double acting brake. Its coated body in a slim gas spring design and the piston rods with wear-resistant surface coating are features of high quality and long service life. The maintenance free, ready-to-install and closed systems provide a constant feed rate and are adjustable, and the control segment on the piston makes adjustment at the end position child’s play. Thanks to many add-on components the assembly is easy to mount, so that the damper can be universally deployed for damping back and forth swinging masses, such as in power or free conveyors.

Adjustable Compression Force max. 180 N Stroke 10 mm High quality and long service life: The HB model of hydraulic damper can also be used as single or double acting brake. Its coated body in a slim gas spring design and the piston rods with wear-resistant surface coating are features of high quality and long service life. The maintenance free, ready-to-install and closed systems provide a constant feed rate and are adjustable, and the control segment on the piston makes adjustment at the end position child’s play. Thanks to many add-on components the assembly is easy to mount, so that the damper can be universally deployed for damping back and forth swinging masses, such as in power or free conveyors.

Adjustable, Without Free Travel Compression Force max. 40,000 N Stroke 111 mm Damping either in one or both directions: The HBS models of hydraulic dampers are made in a slim gas spring design and are compact and high in performance. Maintenance-free and ready-to-install they allow precise setting of retraction and extension speeds without any free travel when changing direction. These hydraulic dampers offer constant feeding rates and can be finely tuned via the screw adjustment. A control segment on the piston makes the adjustment at the end position child’s play. Thanks to many add-on components the assembly is easy to mount, so that the damper can be universally deployed for damping back and forth swinging masses, such as in power or free conveyors.

Adjustable, Without Free Travel Compression Force max. 10,000 N Stroke 117 mm Damping either in one or both directions: The HBS models of hydraulic dampers are made in a slim gas spring design and are compact and high in performance. Maintenance-free and ready-to-install they allow precise setting of retraction and extension speeds without any free travel when changing direction. These hydraulic dampers offer constant feeding rates and can be finely tuned via the screw adjustment. A control segment on the piston makes the adjustment at the end position child’s play. Thanks to many add-on components the assembly is easy to mount, so that the damper can be universally deployed for damping back and forth swinging masses, such as in power or free conveyors.

Adjustable, Without Free Travel Compression Force max. 3,000 N Stroke 62 mm Damping either in one or both directions: The HBS models of hydraulic dampers are made in a slim gas spring design and are compact and high in performance. Maintenance-free and ready-to-install they allow precise setting of retraction and extension speeds without any free travel when changing direction. These hydraulic dampers offer constant feeding rates and can be finely tuned via the screw adjustment. A control segment on the piston makes the adjustment at the end position child’s play. Thanks to many add-on components the assembly is easy to mount, so that the damper can be universally deployed for damping back and forth swinging masses, such as in power or free conveyors.

Adjustable, Without Free Travel Compression Force max. 50,000 N Stroke 100 mm Motion control in both directions: The HBD model of hydraulic dampers can be adjusted independently in both the push and pull direction. These maintenance-free, ready-to-install and closed systems leave no prayers unanswered as far as the setting of retraction and extension speeds are concerned. In addition each damper works without any free travel therefore the flow of oil can be regulated exactly via the two precision metering orifices. Adjustment can be made once installed and even when moving through stroke. The coated body and hard-chromed piston rods stand for quality and long service life. The variety of mounting accessories makes assembly easy and the high-end hydraulic dampers universally usable.

Adjustable, Without Free Travel Compression Force max. 6,000 N Stroke 50 mm Motion control in both directions: The HBD model of hydraulic dampers can be adjusted independently in both the push and pull direction. These maintenance-free, ready-to-install and closed systems leave no prayers unanswered as far as the setting of retraction and extension speeds are concerned. In addition each damper works without any free travel therefore the flow of oil can be regulated exactly via the two precision metering orifices. Adjustment can be made once installed and even when moving through stroke. The coated body and hard-chromed piston rods stand for quality and long service life. The variety of mounting accessories makes assembly easy and the high-end hydraulic dampers universally usable.

Adjustable, Without Free Travel Compression Force max. 2,000 N Stroke 50 mm Can be regulated separately in any stroke position: The hydraulic dampers in the DVC-32 model are the first model to have the ability to have the in and out speeds adjusted independently from the outside and therefore more precisely. With their individual adjustment segments for the push and pull direction as well as the double-sided action, these are suitable as safety or control elements. The great number of mounting accessories makes assembly of these hydraulic dampers by ACE easier and allows these maintenance-free, ready-to-install and self-contained systems universally applicable. Qualitatively high grade, and at the same time simple to use; one of their uses is to absorb swinging loads.

Adjustable, Without Free Travel Compression Force max. 2,000 N Stroke 50 mm Can be regulated separately in any stroke position: The hydraulic dampers in the DVC-32 model are the first model to have the ability to have the in and out speeds adjusted independently from the outside and therefore more precisely. With their individual adjustment segments for the push and pull direction as well as the double-sided action, these are suitable as safety or control elements. The great number of mounting accessories makes assembly of these hydraulic dampers by ACE easier and allows these maintenance-free, ready-to-install and self-contained systems universally applicable. Qualitatively high grade, and at the same time simple to use; one of their uses is to absorb swinging loads.

Radial Damping, Heavy Duty Version Energy capacity 405 Nm/cycle Stroke max. 14 mm Impact and collision protection: The TR-HD profile dampers are stressed in the same way as the basic model TR but offer a higher force and energy absorption with a shorter damping distance thanks to the solid design. Different damping characteristic curves can be achieved with two different co-polyester elastomer hardness levels. The slightly oval (bi-concave) shape also ensures a softer force intake. This series absorbs a lot of energy despite the low height: a range of 405 Nm to 11,840 Nm is progressively covered by strokes of 12 mm to 44 mm. With two screws, included in the delivery, the damper can be easily and quickly fixed both horizontally or vertically. The drill hole distance is adapted if required.

Radial Damping, Long Version Energy capacity 7.2 Nm/cycle Stroke max. 17 mm Especially for applications with long and soft deceleration: The radial tube dampers TR-L from the ACE TUBUS-Series are maintenance-free, ready-to-install elements made of co-polyester elastomer. Their radial load offers designers a very long and soft deceleration with a progressive reduction in energy at the end of the stroke. The TR-L-Series has been specially developed for a maximum stroke with a minimum height and a range of 7.2 Nm to 10,780 Nm. The absorption capacity is dependent on the length of the selected tube damper. These models are available in sizes between Ø 29 mm and Ø 188 mm.

Radial Damping, Hard Version Energy capacity 2.7 Nm/cycle Stroke max. 15 mm Harder mixture of materials for higher energy absorption: The maintenance-free and ready-to-install TR-H-Series profile dampers, are stressed radially in the same way as the basic TR model. With almost the same dimensions, they also decelerate with a very long and soft action. The harder co-polyester elastomer mixture leads to significantly high energy absorption of 2.7 Nm to 427 Nm in these models. Easy to mount due to the supplied special screw. The TR-H-Series is space-saving with dimensions of Ø 30 mm to Ø 102 mm. It complements the TUBUS range between the progressive TR and almost linear TS models. Users are therefore provided with a full range of deceleration curves within the ACE TUBUS family.

Dampers play a crucial role in the functionality of industrial ductwork as they are designed to control the flow of air or flue-gas within the ducts. The primary purpose of most dampers is to act as shut-off dampers. This means they are either fully open or fully closed depending on the operational requirements. However, some dampers are specifically installed to modulate the gas flow, allowing them to function in various partially open positions. The variability in damper functionality caters to different operating scenarios and provides flexibility in managing the flow of air or flue-gas through the duct system.

Adjustable, Without Free Travel Compression Force max. 10,000 N Stroke 100 mm Motion control in both directions: The HBD model of hydraulic dampers can be adjusted independently in both the push and pull direction. These maintenance-free, ready-to-install and closed systems leave no prayers unanswered as far as the setting of retraction and extension speeds are concerned. In addition each damper works without any free travel therefore the flow of oil can be regulated exactly via the two precision metering orifices. Adjustment can be made once installed and even when moving through stroke. The coated body and hard-chromed piston rods stand for quality and long service life. The variety of mounting accessories makes assembly easy and the high-end hydraulic dampers universally usable.

Flat duct connector with damper made of white ABS plastic. The damper regulates the air flow in the ventilation system. It is available with dimensions of 110x55mm. It connects the flat D/P elements of the ventilation system. The elements of the ducts are joined using the "push-in" method without the need for sealing. Element made in Poland. 50 years of DOSPEL experience in production is a guarantee of the highest quality.

The bearings we have defined so far are the basic types, which constant feature is the fact that they allow all-ways movements and rotation. However, movements can be limited in one or all ways, thus obtaining guided or fixed bearings, respectively. In the first case -guided bearings- the restriction is obtained by means of guides parallel to the supporting axe that allows movement. To make friction as low as possible, PTFE and stainless steel sheets are welded to the guides.

Ventapp dampers are used for controlling hot, ue and process gases in various industrial branches often in connection with VENTAPP industrial fans.Process optimisation and consistency, increased energy eciency - VENTAPP oers a wide range of high-quality industrial dampers and air intakecontrollers designed even for the most extreme boundary conditions. Ampleaccessories like monitoring equipment, special switches, add-on sets and closing devices ensure adequate adjustment to the production process. FeaturesSingle or multi-vane control dampers for controlling stable processes Safety dampers with self-triggering counterweights to respond toemergencies and ensure safe maintenanceControl and non-return valves with heatable seal air to prevent overpressure and corrosionAir intake controls for energy ecient blower controlAdvantagesCustomer-specic manufactureRobust designHigh ependability and operational safety Diverse accessoriesMaintenance and repair servicesquare up to 3,000 x 8,000 mm

AJS supply a large range of dampers differing in style which provide varying safety features in ductwork systems which are connected to heating, ventilation and air conditioning systems from fire safety to regulating the air flow. There are various different styles of damper which can be used for different styles of application dampers include butterfly, non return, fire, smoke, constant and blast gate plus many more. Dampers are available with various different safety features.

The SUSPA hydraulic dampers, also called shock absorbers, industrial shock absorbers or vibration dampers, are designed for the respective product application so that an optimal movement sequence or optimal vibration behavior is achieved. We use our decades of experience in the field of damping technology to solve your individual requirements for damping vibrations and impacts.

This 3-step control switch regulates EC fans, damper actuators, AC fan speed controllers or frequency inverters. It needs 10 VDC supply voltage. The device has an OFF position to stop the motor completely. Thus, the output signal is divided into 4 steps: 0 VDC and 3 other output voltages. The output for position 3 always equals the supplied voltage i.e. 10 VDC. The output ranges for positions 1 and 2 can be adjusted via internal trimmers. There is also a version with 2 predetermined voltage steps: SMT-D-4P-EM

BKD 100 TYPE AIR DAMPER BKD100 Type Air Dampers; are used for Air Handling Units, Ventilating Ducts, Industrial Air Conditioners to control air volume and to shut-up air movement. Features * Galv. Frame+Al. Blade * Al. Frame+Al. Blade * Stainless Leakage sheet * Manuel or Motorised Control * EPDM or silicone leakage gasket * Fiberglass Nylon Bearing * Parallel or Opposite Blade * Operating Temp.: -20C to 80C.

Hydraulic Damper is widely using in the automotive,fintness equipment and medical equipment, which is characterized by resistance to change with the speed of operation. it's has visible buffering function to the connected systems. Dampers are mainly used as a buffer role, it's biggest feature is the force of gas spring changed by travel speed change. when the action point which guided by outside force to the gas spring with a fast movement,the gas spring's resistance will increase. and when the point of movement is very slow, virtually almost no resistance. We custom OEM hydraulic dampers according to customer's drawings or samples.

Winson Pneumatic & Hydraulic Struts Custom Hydraulic Shock Dampers Hydraulic Damper is widely using in the automotive,fintness equipment and medical equipment, which is characterized by resistance to change with the speed of operation. it's has visible buffering function to the connected systems. Dampers are mainly used as a buffer role, it's biggest feature is the force of gas spring changed by travel speed change. when the action point which guided by outside force to the gas spring with a fast movement,the gas spring's resistance will increase. and when the point of movement is very slow, virtually almost no resistance. We custom OEM hydraulic dampers according to customer's drawings or samples. sales@gasspringscn.com WhatsApp +86 13780014913

The FDA12 round fire dampers are designed for use in general ventilation systems to seal off smoke and fire between adjacent fire partitions. The fire dampers are classified according to EN 135013+A12010P (Fire classification f construction products and building elements). The fire resistance was tested as per PNEN 136622001P (Fire resistance tests for service installations Part 2 Fire dampers). The entire manufacturing process meets the requirements of EN 156502010. The FDA12 fire dampers can be installed in horizontal and vertical fire partitions to provide fire resistance of EI 120 (ve ho i↔o) S (which may depend on the actual fire resistance of the partition). The fire dampers are available in the nominal diameter sizes DN100, DN125, DN160, DN200, DN250, and DN315. All fire dampers have a pull spring control gear and a fusible thermal trip (in FDA12T) or a returnspring actuator coupled with a thermal trip (in FDA12M).