Deburring - Import export

Metal sheet thickness in range 0,3 – 12 mm Vacuum table Three technological sections Maximal width 1350 mm Processing of mild steel Processing of stainless steel

CONTINUOUS TROWALIZING OF NON-SENSITIVE PARTS The AV range of continuous units allows you to continuously process large quantities, with no need to interrupt the mass finishing process to add new workpieces. Thanks to the trough-shaped work bowl, you can process small and medium non-sensitive mass-produced parts (punched parts, die-cast parts, etc.), as well as larger parts (oil tanks, cylinder head covers, etc.). THE BENEFITS AT A GLANCE Continuous workpiece processing Interruption-free workpiece loading Trough-shaped work bowl Easy to integrate in fully automated mass finishing processes Simple material handling without batch loading

THE EFFICIENT SOLUTION FOR SMALL PRODUCTION SERIESAre you looking for a solution that is a more economical choice than a larger Trowal system? Then look no further than our E5 mini barrel. It is perfect for deburring and abrasion, above all on small workpieces from the optical and fine mechanics industries. The double-conically shaped rotating barrel body generates an intense rotation to achieve the perfect abrasion result. SOPHISTICATED TECHNOLOGY The mini barrel stands on a steel sheet construction with four pedestals. The barrel bodies are secured to a drive roller and support roller with locking rings. The barrel body is made from polyurethane and the quick-action cap is waterproof. SPECIAL EQUIPMENT It is also possible to attach two additional barrel bodies if necessary. These are driven via a roller system that is fully variable thanks to a three-phase motor. The cover can also be ordered with safety switches.

After chamfering with the ChamferCut technology, no additional processing is necessary. No need for a second cut, often required during the deformation-based deburring process for the removal of material build up. With the chamfering process, the exact chamfer form is cut. In contrast to deformation-based processes, the material structure is not affected. Thus, there is no negative impact on finishing after heat treatment (e. g. honing). The precision of this LMT Fette engineered process is undisputed. The quality of such chamfers defines a new standard – with maximum repetitive accuracy. The combination of these process benefits along with low tool costs makes the ChamferCut the most economic deburring and chamfering process on the market. Advantages: - 100% chamfer quality - Chamfer correction possible via machine control - High efficiency - Simple, cost-effective reconditioning - Module range 0.8 – 42

INDIVIDUAL SOLUTIONSIf you are searching for a custom solution for your mass finishing processes, the TT...B series is the best choice. The modular system allows you to fit the individual machines with feeders, screening machines and abrasive media return transport systems as required. ELECTROMECHANICAL OR HYDRAULIC SYSTEMS AVAILABLE The work bowl can be pivoted either electromechanically (TT 25, TT 45) or hydraulically. You can also partially automate processing with the respective peripheral devices such as feeding and separating units. THE BENEFITS AT A GLANCE Individual mass finishing solution Modular system Choose from electromechanical or hydraulic system Partial automation possible

TT...SM CENTRIFUGAL DISC FINISHING UNITCOMPACT AND PIVOTING Centrifugal disc finishing units from the TT...SM range have an attached screening machine and integrated hopper for abrasive media. After processing the workpieces, the entire unit pivots by 135° to separate the abrasive media and workpiece mass on the screening machine. SUITABLE FOR HIGH-VALUE WORKPIECES While the system pivots back into the working position, the abrasive media are conveyed back into the work bowl. This centrifugal disc finishing unit is particularly well suited to processing high-value workpieces, making it a popular choice in the aerospace industry for example. THE BENEFITS AT A GLANCE Compact design saves space Cost effective Suitable for processing limited quantities

Cutting, deburring and grinding operations, which are generally carried out with manual operations, are problematic in standardization and very risky in terms of HSSE. With robotic projects, we obtain the most precise results in a safe way.

CF disc finishing systems with Siemens touch panel for setting and storing all main process parameters.

The SMA 30-A series is available in an electrical or compressed-air operated design. The machine is designed for handling steel, aluminum, copper and plastics. A chamfer width of up to 8 mm is possible in NE metals and a chamfer width of up to 6mm in steel. In addition to this, a radius processing of 1.2mm to 6mm is feasible. The stunning and patented 8 or 16 cutting turning plate system guarantees long service life, best surface qualities and efficient working. The electrical design of the SMA 30 is equipped with a speed control and should be preferably used for stainless steel processing. The cutter heads are available for chamfer angles 30°, 45° and 60°. The processing of drill holes is already possible starting at a diameter of >28mm. For tight contours, long holes and bores, a single-cutting cutter head with a fitting guide roller is available, Ø10mm to Ø20mm depending on application.

The SMA 20-A series is available in an electrical or compressed-air operated design. The machine is designed for handling steel, aluminum, copper and plastics. A chamfer width of up to 7 mm is possible in NE metals and a chamfer width of up to 4mm in steel. In addition to this, a radius processing of 1.2mm and 2.5mm is feasible. The stunning and patented 8 or 16 cutting turning plate system guarantees long service life, best surface qualities and efficient working. The processing of drill holes is already possible starting at a diameter of >20mm.

The automatic weld chamfering machine ASO 920 is for portable use in weld seam preparation. The attachment of large welded chamfers on the workpiece upper edge up to a chamfer length of 90mm can be performed by the machine effortlessly without any thermal change to the material, because the heat dissipation occurs through the chip. V, X, K, U or Y seams can be prepared thanks to the gradual angle adjustment from 0° - 30°. The highlight here is the machining preparation of a tulip seam. The machine is very durable and shows its’ strength in every material through their sturdy construction. Extremely high tool service life can be achieved with the low-speed chamfering. Sheet thickness started at 8mm can be processed. Advantages: Easy to adjust to material thickness, chamfer angle and working height Cutter head can be set in Z and X-axis No change to material properties, through heat dissipation via chip V-, X-, K-, U- or Y- seams possible

The KSM 125 and KSM 130 edge grinding machines are designed for deburring and edge cutting of small to big workpieces starting with a thickness of 2 mm. The chamfer is scrubbed and finished in one step with our two-zone grinding disc. The chamfer setting is made by opening / closing the prism. This is used effectively and efficiently through the axial adjustable corundum grinding disc. The KSM 125 has an integrated extraction socket for connection to an extraction system. A water cooler is installed in the KSM 130. The machines are equipped with hardened and polished guide rails. Hardened workpieces and HSS materials can be processed p to 5mmx45° in multiple steps. For longer workpieces or serial part production, we recommend optimizing the feed unit with pressing pressure, surface quality, feed speed and service life of tools. The machines can be installed on an undercarriage for flexible use in a workshop.

The automatic recess chamfering machine ASO 910 is for welded seam treatment of, for example, duplex steel. The recess chamfering or resetting of cladding is mastered excellently by the edge chamfering machine. The attachment of chamfers on the top edge of the workpiece is possible up to 65mm. Thanks to the gradual angle adjustment from 90° - 75°, clean transitions are created between two workpieces with different thicknesses. The machine is very durable and shows its’ strength in every material through their sturdy construction. Extremely high tool service life can be achieved with the low-speed chamfering. Sheet thickness started at 8mm can be processed. The front, top and/or bottom side can be processed in one step through a special shape chamfer. Cavities in the front can be chamfered using the disc groove cutter. Advantages: Easy to adjust to material thickness, chamfer angle and working height Cutter head can be set in Z and X-axis No thermal change to the material

The automatic weld-chamfering machines from the ASO 930 series are for stationary and portable use in weld seam preparation. The attachment of large welded chamfers on the workpiece bottom edge up to a chamfer length of 74mm can be performed by the machine effortlessly without any thermal change to the material. V, X, K or Y seams can be prepared thanks to the gradual angle adjustment from 0° - 75°. The machines are very durable and show their strength in every material through their sturdy construction. Extremely high tool service life can be achieved with the low-speed chamfering. Sheet thickness started at 8mm can be processed. Smaller workpieces can be processed manually. Advantages: Easy to adjust to material thickness, chamfer angle and working height No thermal change to the material V-, X-, K-, I- or Y- seams possible Very long operating life and cutting performance Gradual feed adjustment depending on material from 0 - 1.

The automatic weld-chamfering machines from the ASO 900 series are for stationary and portable use in weld seam preparation. The attachment of large welded chamfers on the workpiece upper edge up to a chamfer length of 53mm can be performed by the machine effortlessly without any thermal change to the material, because the heat dissipation occurs through the chip. V, X, K or Y seams can be prepared thanks to the gradual angle adjustment from 15° - 80°. The machines are very durable and show their strength in every material through their sturdy construction. Extremely high tool service life can be achieved with the low-speed chamfering. Sheet thickness started at 8mm can be processed. Smaller workpieces can be processed manually. Advantages: Easy to adjust to material thickness, chamfer angle and working height No change to material properties, through heat dissipation via chip V-, X-, K- or Y- seams possible

It is the perfect battery-operated tool for deburring, separating, grinding and polishing. Due to its unrestricted mobility, the MT-A enables continuously fatigue-free and efficient work. In addition, its precise and powerful motor makes it easy to process any material. Almost all fields of application are covered.

The SMA 60 is available in an electrical, compressed-air or high-frequency design. The machine is designed for handling steel, aluminum, copper and plastics. In NE metals and steel up with a tensile strength of 600N/mm², a chamfer width of up to 30mm is possible. In addition to this, a radius processing of 1.2mm to 15mm is feasible. The stunning and patented 8 or 16 cutting turning plate system guarantees long service life, best surface qualities and efficient working. The cutter heads are available for chamfer angles between 0 - 80°. The processing of drill holes is already possible starting at a diameter of >28mm. Advantages: Booster technology for a higher material removal rate Spring technology for higher service life of cutting inserts Processing chamfers, radii on sheets, containers, inner and outer edges, contours and drill holes Replaceable cutter head for different chamfer angles 0 - 80° Easy and vibration-free work

The SMA 50-A series is available in an electrical or compressed-air operated design. The machine is designed for handling steel, aluminum, copper and plastics. A chamfer width of up to 20 mm is possible in NE metals and a chamfer width of up to 15mm in steel. In addition to this, a radius processing of 1.2mm to 8mm is feasible. The stunning and patented 8 or 16 cutting turning plate system guarantees long service life, best surface qualities and efficient working. The cutter heads are available for chamfer angles between 0 - 80°. The processing of drill holes is already possible starting at a diameter of >28mm.

The SMA 40-A series is available in an electrical or compressed-air operated design. The machine is designed for handling steel, aluminum, copper and plastics. A chamfer width of up to 16 mm is possible in NE metals and a chamfer width of up to 12mm in steel. In addition to this, a radius processing of 1.2mm to 8mm is feasible. The stunning and patented 8 or 16 cutting turning plate system guarantees long service life, best surface qualities and efficient working. The electrical design of the SMA 40 is equipped with a speed control and should be preferably used for stainless steel processing. The cutter heads are available for chamfer angles between 0 - 80°. The processing of drill holes is already possible starting at a diameter of >28mm. For tight contours, long holes and bores, a single-cutting cutter head with a fitting guide roller is available, Ø10mm to Ø20mm depending on application.

The deburring grinding machine is a manually operated, user-friendly deburring machine that is suitable for various machining processes such as grinding, deburring, edge rounding and polishing of metal surfaces. The swivel arm can rotate 180° and enables the simultaneous mounting of two machining discs. The machine is equipped with a vacuum system that fixes the workpiece on the table.

Our knife can smooth the edge and remove sprayed points and separation lines from mold halves. Furthermore, it is a cabinet and easy to use to avoid injury. Different kinds of blades can be replaced so that the cost is effective. Features: 1, Faster cutting rates 2, Consistently good cutting quality, e.g. improved strength of spliced connections 3, No corrosion 4, Smooth running 5, Extended maintenance intervals 6, Universal cleaning possibilities using acids, alkaline solutions, and organic solvents Application Our cutter is ideal for removing the burrs of plastic, metals, rubber, and so on.

Deburring cutters for tire finishing Tire deburring cutters and pin vent trimmers, tools to trim air vent whiskers and finish off tires after the curing process… We offer a broad range of models to handle most requirements of both tire manufacturers and re-treaders. All our blades are heat treated for quality and endurance.

When processing sheet metal parts by punching, lasering, plasma cutting, flame cutting, etc., a burr is always created. We have met the challenge of deburring or rounding these “sharp” edges of the workpieces in companies by developing our deburring grinding wheels and deburring rollers. By using these highly flexible tools, both on hand machines and on automatic machines, sheet metal parts can be optimally rounded or deburred. We have the right dimensions for your deburring machine! We would be pleased to advise you on which deburring rollers can be used in your processing, in order to achieve top process results.

The deburring discs of the FAPI-M14 125 series are the ideal tool of hand operated deburring. The integrated M14 thread can be adjusted to regulated angle grinders and are especially fit for smaller and medium series, in which the purchase of an automatic deburring machine is not worthwhile. We would be pleased to advise you on which deburring discs can be used in your processing, in order to attain top process results.