Results for
United Kingdom
We offer a Very Wide Range of Brands, please send me enquiry via liamm@merefields.com or enquires@merefields.com
Request for a quoteUnited Kingdom
We have over 10 Million Lines of Components in our Supply. We Supply the FULL Range of Bourns Components Contact me on liamm@merefields.com
Request for a quoteUnited Kingdom
Merefields Supply a very wide range of DIODES, please send email to liamm@merefields.com for a Quote. We have over 10 Million Lines of Components in our Supply!
Request for a quoteHong Kong
Description:The AP1533SG-13 is a DC switching regulator based on a buck topology with a maximum operating temperature of +85°C. It has a voltage output of up to 23V, a minimum supply voltage of 4V, and a switching frequency of 300kHz. It is part of the AP1533 series and has an operating temperature range of -25°C to +85°C (TA)
Request for a quoteHong Kong
The AZ1117IH-3.3TRG1 is a low dropout (LDO) linear voltage regulator with an output current of 1.35 A, a power supply ripple rejection (PSRR) of 70 dB, and an input voltage of up to 15V. It has a positive fixed regulator topology and a voltage regulation accuracy of 1%. The current limit is 1A and the output current is 800mA. The output voltage is 3.3V and the packaging is Digi-ReelR Alternate Packaging. This linear voltage regulator is suitable for a wide range of applications, including power supplies, battery chargers, and portable electronics. It is also suitable for automotive applications, such as power management systems, and industrial applications, such as motor control systems.
Request for a quoteHong Kong
IC LOAD SWITCH SOT25 Digi-Key DIST Single 5.5V 3A 5-Pin SOT-25 T/R Arrow
Request for a quoteHong Kong
The 74LVC1G08 is a single 2-input positive AND gate with a standard push-pull output. The device is designed for operation with a power supply range of 1.65V to 5.5V. The inputs are tolerant to 5.5V allowing this device to be used in a mixed voltage environment. The device is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the output preventing damaging current backflow when the device is powered down
Request for a quoteUnited Kingdom
WE SUPPLY A WIDE RANGE OF LITTLEFUSE PARTS WE HAVE OVER 10MILLION LINES OF COMPONENTS IN OUR SUPPLY. PLEASE SEND liamm@merefields.com FOR QUOTE REQUESTS
Request for a quoteUnited Kingdom
We have over 10 Million Lines of Components in our Supply. We Supply the FULL Range of AVX Components Contact me on liamm@merefields.com
Request for a quoteHong Kong
The LM5050MK-1/NOPB from Texas Instruments is a N+1 ORing Controller in a Digi-ReelR Alternate Packaging package. This controller features internal switches, a 130 μA operating supply current, a logic level input control, a -40 °C to 125 °C operating temperature range and a 0.001270 oz unit weight. Features: • Internal switches • Operating Supply Current: 130 µA • Logic Level Input Control • Operating Temperature Range: -40 °C to 125 °C • Unit Weight: 0.001270 oz • Packaging: Digi-ReelR Alternate Packaging • Product Category: Controllers & Switches • Type: N+1 ORing Controller • Mounting Style: SMD/SMT Applications: The LM5050MK-1/NOPB controllers are ideal for use in applications such as power supplies, computing, and telecommunications. Additionally, these controllers are suitable for use in data centers, distributed power systems, and anywhere high-reliability power distribution is required.
Request for a quoteHong Kong
The AP2139AK-3.3TRG1 is a positive fixed linear voltage regulator with a single regulator and a voltage output of 3.3V. It has a maximum input voltage of 6.6V and a typical voltage dropout of 0.4V at 250mA. It is packaged in a SC-74A, SOT-753 and has an operating temperature range of -40°C to 85°C. Features: • Positive fixed linear voltage regulator • Single regulator • Voltage output of 3.3V • Maximum input voltage of 6.6V • Typical voltage dropout of 0.4V at 250mA • Packaged in a SC-74A, SOT-753 • Operating temperature range of -40°C to 85°C Applications: • Power supplies • Battery-powered devices • Automotive electronics • Industrial electronics • Telecommunications equipment
Request for a quoteGermany
Ths surface control optic LPS50 is used for surfaces with low to medium reflection and can be employed in all coating processes in the industry.
Request for a quoteSpain
Energy-efficient incoherent light sources suitable for optical fiber communications, opto-isolators, lighting purposes, etc. Find IR LEDs, UV LEDs, Single-Color LEDs, Visible LEDs...
Request for a quoteChina
ON Semiconductor 80SQ045N is available at WIN SOURCE. Please review product page below for detailed information, including 80SQ045N price, datasheets, in-stock availability, technical difficulties. Quickly Enter the access of compare list to find replaceable electronic parts. Want to gain comprehensive data for 80SQ045N to optimize the supply chain (include cross references, lifecycle, parametric, counterfeit risk, obsolescence management forecasts), please contact to our Tech-supports team.
Request for a quoteGermany
The ARO PM is used for surfaces with high reflection and is optimally suited for use in paint booths without explosion protection requirements.
Request for a quoteGermany
The surface control optic MRO is used for controlling surfaces with high reflection and is conditionally suitable for color matching. It can be employed in all coating processes in the industry.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Germany
The surface control optic LEDSLO is used for surfaces with high reflection and can be employed in all coating processes in the industry. It projects multi-point light on a surface (sunlight simulation). Ultra-fine defects are visible with LEDSLO.
Request for a quoteGermany
The LEDCCO is used for color matching of painted surfaces. It can be used to simulate virtually all daylight situations, which enable color various of different components to become visible. The LED color control optic is a color matching lamp according to DIN 6173-2 of grade 1 for light type D65. The color temperature is adjustable between 6.500 and 2.700 K. It is used in color matching booths, especially in the automotive sector. However, it is also used in color matching light laboratories, color matching tabletop booths and individual workstations.
Request for a quoteGermany
The surface control optic FBO VAO PM is used for surfaces with medium to high reflection. Thanks to its position in the floor, surface defects are visible in lower areas.
Request for a quoteGermany
The surface control optic FBO PM is used for surfaces with medium to high reflection. Thanks to its position in the floor, surface defects are visible in lower areas.
Request for a quoteGermany
The surface control optic LEDLPO is used for surfaces with high reflection and can be employed in all coating processes in the industry. It projects very focused, multi-point light on a surface (sunlight simulation). Possible surface defects and holograms are more visible.
Request for a quoteGermany
The surface control optic FLO is used for surfaces with low reflection and is particularly suitable for surface control in press plants.
Request for a quoteGermany
The surface control optic UVO PM with LED illuminants is used for surfaces with high reflection. The high quality product is characterized by its durability, high efficiency and low heat generation. With the help of UV light, the light makes white defects on surfaces visible. Particularly in the automotive sector, it is suitable for: effect paints, textiles, plastics and other materials.
Request for a quoteGermany
The surface control optic WLO PM is used for surfaces with low to medium reflection and can be employed in all coating processes in the industry. It generates a high-contrast reflection image and is strongly shielded to reduce glare in a direct and lateral viewing direction.
Request for a quoteGermany
The surface control optic VAO is used for surfaces with medium to high reflection and can be employed in all coating processes in the industry. It stands out with its slimline design.
Request for a quoteGermany
The surface control optic sidemaxLED is used for surfaces with medium to high reflection and can be employed in all coating processes in the industry. Due to it´s uniquely precise and low dazzling parastic image, surface errors even become visible with low light levels.
Request for a quoteGermany
The surface control optic LPS100 PM is used for surfaces with medium to high reflection and can be employed in all coating processes in the industry.
Request for a quoteFrance
The small dimensions of the Domino Sign Dmax2 MINI make it particularly suitable for the illumination of letterboxes of very small sizes and thin thicknesses. In particular, it is specifically designed for 30 mm PMMA led block lighting . In addition, the Domino Sign Dmax2 MINI are specially designed for backlighting . The luminous flux as well as the 150 ° angle of the Domino Sign Dmax2 MINI lenses allow the use of a small quantity of modules while offering a very high light intensity.
Request for a quoteResults for
Diodes - Import exportNumber of results
59 ProductsCompany type