Engine maintenance - Import export

MARINE ENGINES (Inboard, Generator) Engines for Inboard & Generator Korea R&D's marine engines have models ranging from 69 Hp to 320 Hp, and provide the optimal engine by custom-developing. In board engines and generator engines are suitable for consumer use. Excellent Performance Korea R&D's marine engine has excellent performance and durability by applying a robust and advanced common rail fuel injection system that can show the best performance even in fierce conditions. The cooling system with materials to prevent corrosion by seawater ensures optimum performance of the engine. Fuel Economy Korea R&D's marine engine with an optimized combustion system boasts an excellent fuel consumption rate of 15% or more compared to mechanical engines of the same class. Maintenance Korean R&D’s marine engine uses a self-diagnostic device to provide convenient and accurate fault diagnosis and pre-check functions to ensure that the engine is always operated in optimal conditions.

The Graham & Sleevit DF Series is a line of durable tamper evident label applicators suitable for a wide range of applications. For over half a century, Accraply has been the UK’s leading provider of labelling equipment. These labelling machines are customisable to fit your exact specifications. They engineered for easy installation and maintenance, allowing you to easily reach your production goals. Accraply’s line of Graham & Sleevit tamper proof labelling machines can reach production speeds up to 300 products per minute. They can manage many materials, proving to be most suitable for PVC, rPET/PETG, OPS, and PLA. These machines are suitable of sleeving products from 20mm up to 195mm in dimeter at sleeve lengths from 20mm up to 50mm. The State-of-the-art servo film feed facilitates easy setup providing accurate sleeve placement. The design philosophies utilised on our range of Tamper Evident Applicators are adapted to our Full / Part Body Sleeve Applicators.

Proportional dispenser with membrane technology as opposed to the traditional piston, developed specifically for animal health. Equipped with seals for acidic additives. Best performance at low flow rates (young animals/small groups) Best performance at low pressures (gravity feed/pressure drops) Unparalleled engine durability including use in hard, mineral-laden water. Easy and low-cost engine maintenance. Adjustable dosage capacity up to 4% for greater solubility of powdered additives. External injection to protect the engine from chemical attacks.

Proportional dispenser with membrane technology as opposed to the traditional piston, developed specifically for animal health. Equipped with seals for acid additives. Best performance at low flow rates (young animals/small groups) Best performance at low pressures (gravity feed/pressure drops) Unmatched motor durability, including use in hard and mineral-laden waters. Easy and inexpensive engine maintenance. Dosing capacity adjustable up to 4% for greater solubility of powder additives. External injection to protect the engine from chemical attacks.

Proportional dispenser with membrane technology as opposed to the traditional piston, developed specifically for animal health. Equipped with seals for acidic additives. Best performance at low flow rates (young animals/small groups) Best performance at low pressures (gravity feed/pressure drops) Unparalleled engine durability including use in hard, mineral-laden water. Easy and low-cost engine maintenance. Adjustable dosage capacity up to 4% for greater solubility of powdered additives. External injection to protect the engine from chemical attacks.

Square-shaped compressor with reduced weight and footprint, ideal for service vans to work in road assistance and repairs, to provide compressed air wherever it is needed. Industry leading compact, square design Reduced footprint All-sides easy access for managing with worklift Efficient Yanmar Stage V engine Easy maintenance

As a sleeve manufacturer, Hannecard offers a variety of custom-made sleeves that will enhance the quality of your products.New roller cores in steel, stainless steel, aluminum and composite, available in lengths of up to 12m and weights of 32 tons for an extremely wide range of applications. If you are looking for a new design, our experts will be glad to help. Complete roller design for OEM, engineering offices and end users Engineering Roller maintenance, disassembly, inspection and assembly Packaging: repair and manufacturing of transport crates Corrosion protection

Field Service: Activities Our mobile field service teams provide any kind of service on electrical or mechanical equipment such as inspection, diagnostic measurements, maintenance and repairs of rotating equipment and transformers. In addition, our field crew can also perform minor- and major overhauls , including commissioning and start-up assistance . All of our field service activities can be performed on scheduled or non-scheduled basis. Maintenance Partners’ field teams are highly flexible and can cover a broad range of maintenance activities, for example: Complete stop based maintenance On site engineers to support your maintenance department Contract based maintenance Condition monitoring and diagnostic measurements Removal of rotating equipment for overhaul Installation of rotating equipment after overhaul On site bearing changes Laser alignment On site balancing of fans Equipment To provide a complete onsite service, our field teams have a broad range of equipment at...

Our mobile field service teams provide any kind of service on electrical or mechanical equipment such as inspection, diagnostic measurements, maintenance and repairs of rotating equipment and transformers. In addition, our field crew can also perform minor- and major overhauls, including commissioning and start-up assistance. All of our field service activities can be performed on scheduled or non-scheduled basis. Maintenance Partners’ field teams are highly flexible and can cover a broad range of maintenance activities, for example: Complete stop based maintenance On site engineers to support your maintenance department Contract based maintenance Condition monitoring and diagnostic measurements Removal of rotating equipment for overhaul Installation of rotating equipment after overhaul On site bearing changes Laser alignment On site balancing of fans

Its 6 mm tool-receiving socket, the stable finish and the almost maintenance-free reciprocating engine make this filer an indispensable tool even when under extreme and continuous strain - for instance rough machining of casted parts.

Maintenance and expertise With a team of more than 15 people, we put all our resources at your disposal to ensure a global and complete follow-up of your machines. Our experts intervene all over the world in order to guarantee you the best performance of our equipment. We have several mechanics and hydraulic engineers who will help you in the management of corrective maintenance Our offer extends over several fields, from the simple replacement of worn parts to the advanced optimization of the performance of our machines with the support of our automation specialists and engineers. As preventive maintenance has become a major issue in recent years, we also offer maintenance and monitoring contracts for installations, thus ensuring the reliability of your installations with complete peace of mind.

Our team has been installing Ruckus and Watchguard wireless networks for over 14 years in schools across London and the South East. Free site survey and quotation.

InfiRay P200 Compact Thermal Camera is an ultra-modern thermography tool featuring rotatory lens to provide accurate and intelligent temperature measurement. It is named after the star in the northern circumpolar constellation of Ursa Major - "Megrez". The unique gravity-sensing UI, rotating menu, and 56° large FOV can satisfy the requirements in special spaces. The 256×192 resolution, 3.5-inch touch screen, and 16G TF card produce smooth intelligent experiences. Benefiting from the self-developed user-friendly InfiRay temperature measurement analysis software, P200 makes infrared data analysis easy and efficient. It can be connected to the cloud through Wi-Fi to achieve real-time data sharing among multiple devices. It also supports real-time image analysis through USB and settable alarm threshold and multi-area flexible alarm on one screen. P200 has become the right-hand assistant for operation and maintenance engineers, HVAC engineers, and equipment inspectors.

Handling general scrap, car bodies, steel chips, shredder scrap, paving stones and much more, in sea and inland ports or at storage facilities. For pier engineering and riverbed maintenance. For various types of cranes and excavators with internal or external holding cables. For various types of crane with control systems designed for hydraulic motor grab systems. Technical design Open, half-closed or closed grip design Suitable for handling scrap, stones, waste and other difficult to grab goods depending on design Optimisation of crane load capacity thanks to its lightweight design which can hold maximum loads, self-locking grab suspension for crane hooks Grab drive: Vertical electrohydraulic drive unit with high-pressure pump Closing and opening movements are controlled through clockwise or counter clockwise rotation of the electric motor (turn control). The electric motor is only switched on whilst the closing and opening movement is being performed. Grab connection bearing:

Handling general scrap, car bodies, steel chips, shredder scrap, paving stones and much more, in sea and inland ports. For pier engineering and riverbed maintenance. For various types of cranes and excavators with internal or external holding ropes. Technical design As 2-rope and 4-rope grabs with open, half-closed or closed grip Suitable for handling scrap, stones, waste and other difficult to grab goods depending on design Closing rope devices: Rope nozzles KRÖGER MAINTENANCE-FREE, rope-protecting, roller-bearing pulley system Rigidly mounted main casing to accommodate the lower rope pulleys, easily move the ropes and reduce wear on them even when the crosshead is at an angle whilst the grab is being operated Rope pulley bearing: Re-greaseable plain bearing KRÖGER MAINTENANCE-FREE pulley block system Grab connection bearing: Re-greaseable steel bushing bearing KRÖGER MAINTENANCE-FREE bearing system Stable shell structure with shells made out of S355J2+N.

EMA fabricated custom tee strainers can be provided in several different orientations allowing for horizontal or vertical installations. EMA fabricated tee strainers can be furnished with single or double wedge basket designs to meet open area requirements for all your straining needs. EMA fabricated tee strainers are available with numerous types of cover options. From bolted, slip-hinged, knob, swing-away, quick opening, or davit swing arm assembly allowing for ease in maintenance. Quick opening and davit swing arm assembly covers allow for a single maintenance engineer to manage the cleaning of the unit reducing maintenance cost and downtime. Fabricated tee strainers can be fitted with special tapings for vents, drains, or differential pressure gauges in flanged, threaded, socket weld, or butt-weld connections. EMA fabricated tee strainers can be constructed in a wide variety of materials: Carbon Steel, 304/304L Stainless Steel, 316/316L Stainless Steel, Alloy 20, Hastelloy

Fine Tubes has a long history of manufacturing high-quality tubes for nuclear fuel rods, going back to the UK’s first generation of gas cooled reactors in the 1970s. Today we support customers worldwide at the earliest stages of design engineering for new builds, plant maintenance, global life extension projects and Small Modular Reactors (SMR). Nuclear Fuel Rods and Cans Our tubes are deployed in the nuclear fuel rods and cans of advanced gas-cooled reactors. Here they endure extreme temperatures and pressures. Precision, quality, and performance are crucial. Please note that we have a minimum order value of £10,000.

Suitable for handling shapes weighing up to 100 kg, in any place and environment. 21/02/2024, 18:12 Bartoli | Attrezzature per la produzione del formaggio https://www.caseartecnicabartoli.it/en/attrezzaturaproduzioneformaggio 5/6 They are equipped with a resistant stainless steel structure that makes them highly stable and an ergonomic shape that allows them to be moved anywhere, without any effort. They are supplied with battery and charger. Main features: Particularly solid structure, entirely in stainless steel. Electric devices for starting and stopping, controlled by software, located in the central body. Dc engine. Dry-type battery without maintenance. Battery charger with automatic removal when fully charged. Up / down control push-button panel. Battery charge display. Ergonomic handle. Loading surface in hard, non-deformable plastic. Small size. Handy and easy to manage. Pivoting rubber wheels. The rear wheels are equipped with a parking brake.

We have a comprehensive line of pressure-sensitive tapes, perfect for bonding and proving a very strong seal. Our array of fabrication capabilities includes single knife and rewind slitting, rotary die-cutting, and liner and adhesive application. Pressure Sensitive Tapes - Eliminates the need for surface refinishing, reduces assembly time Uses thinner and lighter materials and bonds materials where similar or not very quickly. Some of our biggest clients for these tapes are the US Military and Department of Defence. This product is suitable for Electronic Specialists, Construction Engineers, The Army, Military Technicians, Packaging Technicians, Aircraft Mechanics, Aircraft Engineers, Aircraft Maintenance Technicians, Maintenance Specialists and more within the industries

Our company provides a full range of services for the development and implementation of automated process control systems for industrial enterprises. We are ready to help with the design, modernization, start-up and maintenance of various production lines or individual units of technological processes. 1423 engineering projects have been completed in close cooperation with the technologists and design teams of our clients. We automate existing production facilities, participate in the development and installation of facilities under construction, supply equipment and carry out commissioning, perform further technical and service maintenance. For today, our team is more than 150 people: engineers, managers, equipment installation and maintenance specialists. Be assured – we will carefully study your tasks and provide the best solutions.

Outsourcing IT is becoming increasingly more of a “go to” option with small businesses in London and around the UK due to the drastic savings in costs vs hiring a full/part time IT Support engineer. We can provide your business with one of our proven IT Support packages which will give you complete peace of mind over your IT and enable you to get on with running your business. We understand that no two organisations are the same, for this reason we can design a bespoke IT Support plan that suits your business’s needs. If you have a nagging issue with your computer and need some support, please feel free to contact one of our IT Support engineers on 0203 637 6307 who will be more than happy to assist.

*Made Of Galvanized Metal Plate *Wihtout Motor *Air System Easily With The Help Of Rectangular Fans *Designed For The Needs Of Middle Upper Aspiration Capacity *With The Help Of The Maintenance Covers, Engine And Fan Can Be Fixed Without Removing The Equipment.

Technical Lead & Development provides Engineering Concept Design / Solution to companies active in following markets: Tank Terminal, Exploration & Production, Oil & Gas Storage Tanks, Chemical & Petrochemical Facilities, Power Plant, Water & Wastewater Treatment. Main Activities The company delivers Engineering & Design, Procurement, Installation and Maintenance solutions to its clients. Our Quality Working in close partnership with top manufacturers all over the world, we offer high quality, cost-effective and tailor made solutions to our customer’s needs.

Proven reliable FTIR technology yields real-time analysis of both organic and inorganic compounds. Measures ambient toxic and pollutant gases with ppb to % level detection. A variety of user configurable alarms for instant warnings of toxic gas levels and system control. Capable of monitoring 28 components with up to 32 sampling points over a distance of 300 meters from the analyzer. Rapid response time – typically 20-200 seconds per stream. Configurable sample point selection control locally or by DCS. SpectraRTS™ operating software engineered exclusively for environmental monitoring – appropriate for development chemists, engineers and maintenance personnel.

The plusMETER combines the functionality of a power monitoring system, a process data acquisition system as well as that of a process control system in a single device and can replace whole control cabinets because of its integrated load circuit. Acquisition of all energy carriers Don’t limit yourself to electrical energy – all energy flows in your facility can be acquired and plotted by one central device. Transparent production costs Keep an eye on your profit margin – automatically visualize production costs or communicate them to your ERP system. Remote maintenance Avoid engine downtimes by worldwide system access for problem analysis – for authorized personnel only, of course. Communication of events Stay up to date, define events and keep being informed automatically either by e-mail or directly per push message on your smartphone. Automatization of routine tasks Automate maintenance processes and more..