Filters for pumps - Import export

without shaft seal streamlined housing made of PP or ETFE volume flow of up to 220 l/min delivery head of up to 14m.WG back pull-out

nickel plated brass

Trolley with vane pump Cartridge filter: 10 microns Suction and discharge kit: Oil: 10 to 500 cSt (mm2/s) Built-in and adjustable bypass Maximum suction lift: 5 metres Maximum temperature of the pumped liquid: 60°C Single-phase or three-phase motor Voltage: single-phase 230 (FiLTRO20, FiLTRO22) and three-phase 400 (FiLTRO21, FiLTRO23) Current: 4.6 (FiLTRO20), 2.2 (FiLTRO21), 7.8 (FiLTRO22), 5 (FiLTRO23)

Our powder paint booths are manufactured as standard or custom design according to the customer’s needs. For the cabin selection, the dimensions of the parts and the targeted capacity are the determining elements. Our booths are made of stainless steel or galvanized sheet and fully assembled with bolts to easy disassembling. In our powder paint booths with filter, the air is sucked through the filters while the unused powder particles are held by filters. The filters are automatically and periodically pumped air in reverse direction to direct the powder paint that held by filters to the sieve tanks which is under the cabinet for reusing. As a result of this process, the unused powder paint is recycled. Polyester-Teflon and Sinter-Lamellar type filters are used in our booths. Polyester-Teflon filters are preferred due to their low cost and Sinter-Lamellar filters are preferred due to their long filter life. Both types offer efficiency with recycling systems, economical solution

TECHNICAL DEFINITION Interior finishing plaster. Can be used with Airless spray. It provides a fine, uniform and even finish and is easy to sand. COMPOSITION AND APPEARANCE Water, calcium carbonate, resin and various additives. The resulting paste is off-white in colour. COVERINGS Primer coat, paint, wall coverings. TECHNICAL PROPERTIES • Density : 1.8 • Dry extract : 73% STORAGE 18 months in original unopened packaging away from frost and high temperatures. PREPARATION OF SUBSTRATES. Substrates must comply with the DTU 59.1 standard i.e. be dry, clean, dust-free, hard and free of any trace of separating agent. Scrape, brush and remove dust from concrete, plasterboard and plaster tiles. APPLICATION Manual application : With a trowel or filling knife. Mechanical application : Airless and spraying machine. In cold weather, mix the product quickly to aid aspiration. We recommend removing the filter from the pump, spraying at about 80 cm from the substrate.

TECHNICAL DEFINITION White, matt, ready-to-use thin finishing plaster to level interior substrates. Ideal plaster for renovating uneven or textured substrates. COMPOSITION AND APPEARANCE Water, calcium carbonate, resin and various additives. SUITABLE SUBSTRATES All types of interior substrates: concrete, cellular concrete, cement, breeze, brick, plasterboard, plaster tiles, plaster, old paint, glass canvas, old droplets, glass fibre cloth, old droplets. TECHNICAL PROPERTIES • Density : 1.3 • Dry extract : 66% • Fire classification : A2s1d0 STORAGE 18 months in original unopened packaging away from frost and high temperatures. APPLICATION Manual application : with a trowel or filling knife. Mechanical application : airless spray, spraying machine. In cold weather, mix the product quickly to aid aspiration. We recommend removing the filter from the pump, spraying at about 60 cm from the substrate.

AREAS OF USAGE: 1-CHEMICAL INDUSTRY: For transfer acids, alkalis, solvents, alcohols 2-REFINING INDUSTRY: For using as dosage, circulation pump, filter press pump 3-TEXTILE INDUSTRY: Transferring textile chemicals 4-PACKAGING INDUSTRY: Transferring for glues, resins, paints, varnishes, compounds ADVANTAGES: 1-Corrosion-resistant 2-Pumps can use for transferring fluids which contains particles 3-Maintenance is easy and costs are low 4-Flow rate can adjust with change inlet air pressure. 5-Pumps can work without fluids. 6-Suction depth is 1,5 meter.

AREAS OF USAGE: 1-CHEMICAL INDUSTRY: For transfer acids, alkalis, solvents, alcohols 2-REFINING INDUSTRY: For using as dosage, circulation pump, filter press pump 3-CERAMIC INDUSTRY: Glaze and slurry transfer 4-SHIPPING INDUSTRY : Transferring bilge, sludge and chemicals 5-COSMETIC AND PHARMACEUTICAL INDUSTRY: For transfer cream, shampoo, gel and other chemicals 6-PACKAGING INDUSTRY: Transfer and storage of products such as glue, resins, paint, varnish, ink ADVANTAGES: 1-Corrosion-resistant 2-Pumps can use for transferring fluids which contains particles 3-Maintenance is easy and costs are low 4-Flow rate can adjust with change inlet air pressure. 5-Pumps can work without fluids. 6-Suction depth is 6 meter.

Deliver precise doses while minimizing contamination in nasal inhalers Pharmaceutical and healthcare companies rely on Porex for customized antimicrobial filtering solutions for nasal inhalers and spray pumps. POREX ® filters are designed to prevent contamination of the pharmaceutical agent. Our nasal inhaler and spray pump filters: Facilitate cleaning filtration–Porous materials ensure pharmaceutical agent is free of contamination. Deliver preservative-free packaging–Antimicrobial additives in the structure of porous material helps maintain the sterility of the pharmaceutical agent. Offer optimized air flow performance as specified by the functional requirements of the specific device.

Deliver precise doses while minimizing contamination in nasal inhalers Pharmaceutical and healthcare companies rely on Porex for customized antimicrobial filtering solutions for nasal inhalers and spray pumps. POREX ® filters are designed to prevent contamination of the pharmaceutical agent. Our nasal inhaler and spray pump filters: Facilitate cleaning filtration–Porous materials ensure pharmaceutical agent is free of contamination. Deliver preservative-free packaging–Antimicrobial additives in the structure of porous material helps maintain the sterility of the pharmaceutical agent. Offer optimized air flow performance as specified by the functional requirements of the specific device.

Deliver precise doses while minimizing contamination in nasal inhalers Pharmaceutical and healthcare companies rely on Porex for customized antimicrobial filtering solutions for nasal inhalers and spray pumps. POREX ® filters are designed to prevent contamination of the pharmaceutical agent. Our nasal inhaler and spray pump filters: Facilitate cleaning filtration–Porous materials ensure pharmaceutical agent is free of contamination. Deliver preservative-free packaging–Antimicrobial additives in the structure of porous material helps maintain the sterility of the pharmaceutical agent. Offer optimized air flow performance as specified by the functional requirements of the specific device.

Deliver precise doses while minimizing contamination in nasal inhalers Pharmaceutical and healthcare companies rely on Porex for customized antimicrobial filtering solutions for nasal inhalers and spray pumps. POREX ® filters are designed to prevent contamination of the pharmaceutical agent. Our nasal inhaler and spray pump filters: Facilitate cleaning filtration–Porous materials ensure pharmaceutical agent is free of contamination. Deliver preservative-free packaging–Antimicrobial additives in the structure of porous material helps maintain the sterility of the pharmaceutical agent. Offer optimized air flow performance as specified by the functional requirements of the specific device.

Deliver precise doses while minimizing contamination in nasal inhalers Pharmaceutical and healthcare companies rely on Porex for customized antimicrobial filtering solutions for nasal inhalers and spray pumps. POREX ® filters are designed to prevent contamination of the pharmaceutical agent. Our nasal inhaler and spray pump filters: Facilitate cleaning filtration–Porous materials ensure pharmaceutical agent is free of contamination. Deliver preservative-free packaging–Antimicrobial additives in the structure of porous material helps maintain the sterility of the pharmaceutical agent. Offer optimized air flow performance as specified by the functional requirements of the specific device.

Deliver precise doses while minimizing contamination in nasal inhalers Pharmaceutical and healthcare companies rely on Porex for customized antimicrobial filtering solutions for nasal inhalers and spray pumps. POREX ® filters are designed to prevent contamination of the pharmaceutical agent. Our nasal inhaler and spray pump filters: Facilitate cleaning filtration–Porous materials ensure pharmaceutical agent is free of contamination. Deliver preservative-free packaging–Antimicrobial additives in the structure of porous material helps maintain the sterility of the pharmaceutical agent. Offer optimized air flow performance as specified by the functional requirements of the specific device.

Deliver precise doses while minimizing contamination in nasal inhalers Pharmaceutical and healthcare companies rely on Porex for customized antimicrobial filtering solutions for nasal inhalers and spray pumps. POREX ® filters are designed to prevent contamination of the pharmaceutical agent. Our nasal inhaler and spray pump filters: Facilitate cleaning filtration–Porous materials ensure pharmaceutical agent is free of contamination. Deliver preservative-free packaging–Antimicrobial additives in the structure of porous material helps maintain the sterility of the pharmaceutical agent. Offer optimized air flow performance as specified by the functional requirements of the specific device.

Advantages Simple, compact design Area of application For the filtration of all types of liquids; protection filter for pumps and volumeters, pipeline filter, etc. Flow rate Various filter sizes and the modular design enable any required flow rate. classification number S7 Filter aid - Filtration degree 10 µm - 5 mm Medium oil, water Filter material perforated plate cylinder

Advantages Simple, compact design Area of application For the filtration of all types of liquids; protection filter for pumps and volume meters, pipeline filter, etc. Flow rate Various filter sizes and the modular design enable any required flow rate. classification number S8 Filter aid - Filtration degree 10 µm - 5 mm Medium Oil, water Filter material Sieve Disk

Advantages Parallel alignment of multiple Sieve Baskets enables a large filtration area Area of application For the filtration of all types of liquids; protection filter for pumps and volumeters, pipeline filter, etc. Flow rate Various filter sizes and the modular design enable any required flow rate. classification number S21 Filter aid - Filtration degree 50 µm - 20 mm Medium oil, water and solvents Filter material Perforated Plate Cylinder, Mesh

Advantages Inline alignment of Sieve Baskets; all pressure rates and materials are possible; applicable for processes with high differential pressure; heated version available Area of application For the filtration of all types of liquids; protection filter for pumps and volumeters, pipeline filter; etc. Flow rate Various filter sizes and the modular design enable any required flow rate. classification number S11 Filter aid - Filtration degree 50 µm - 20 mm Medium oil, water and solvents Filter material perforated plate cylinder, mesh

The sealer mod. DZ 800 W is a multifunctional machine for of large dimensions. Without limitation caused by the size of vacuum chamber, this horizontal vacuum packaging machine has very wide application range. Built in stainless steel. The vacuum pump 20 m³/h allows for high production. The sealing bar (or the sealing bars depending on the model chosen) with width 10 mm and closing with compressed air ensures a perfect seal on any type of material also very thick. The intake system with nozzles allows the use of any type of smooth or embossed envelope (NO BELLOW). The closure of the bars is through a dual button command (dual control security). When you have to pack flours or products that could make some dust, it is absolutely recommended to install the dust filter to avoid damaging the vacuum pump (main part of the machine) Similarly, we recommend installing the filter for liquids when you need to vacuum-pack products such as sauces or tomato purée.

Spraying system with state-of-the-art high-pressure motor pump set equipped with bypass, filter and pressure gauge. Pump equipped with ultra-resistant ceramic pistons. Motors are used with great success in the most diverse industrial activities, in particular in hygiene, humidification and cooling processes. Thanks to their exceptional technical characteristics, these groups can work continuously with low maintenance.

The differential pressure transmitter DPT 200 has been especially designed for the process industry and can be used for level measurement of closed, pressurized tanks, pump or filter controlling, etc. The possibility passes different pressure seals at the DPT 200 adding with different membrane materials to reach an optimal adaptation to the application. Features: — differential pressure von 1 mbar bis 20 bar — static pressure bis max. 400 bar — turn-down max. 100:1 — accuracy: 0.075 % FSO — HART®-communication — output signal: linear or square root extraction — aluminium housing Optional Features: — IS-version: Ex ia = intrinsically safe Version (group II) EX ia= intrinsically safe Version for firedamp mines (group I) Ex d = flameproof enclosure (group II) — LC-Display — stainless steeel housing

Operation: The vacuum draws the product from the storage tank into the bottle without any contact between the product and other mechanical components of the machine. Features: • Automatic product level in the bottle with manual adjustment. • Stainless steel base, structure, and nozzles. • Gaskets and other plastic components made from materials certified for food use. • Height adjustment for different bottle sizes with centralized spring. • Vacuum adjustment based on the product type with a pressure gauge. • Filter to protect the pump group. • Borosilicate glass product recovery tank. • Universal product transfer tubes (suitable for wines, beer, oil, spirits, hot fruit juices). • Completely accessible and sanitizable product transfer circuit. • Availability of special nozzles for filling small mignon bottles. Ultrafill-2 Model: from 200 to 400 bottles per hour. Ultrafill-4 Model: from 400 to 600 bottles per hour.

The household reverse osmosis filtration system gives a high purity of drinking water through a system of high capacity filtration that removes even the smallest microorganism or particles that may be present in the water. The filtration system consists of: Prefilter for sediment. Activated carbon filter. Reverse osmosis membrane. Postfilter activated carbon filter. A patented reverse osmosis unit that is unique on the market, whose design avoids the need for multiple connections and tubes, and possible water leaks. System with easy to replace filters. It incorporates a pump that ensures the required water input pressure necessary for proper operation and a pressured accumulator tank of 12 liters. It is installed under the sink in the kitchen and requires water inlet, drainage and electricity like a washing machine. A faucet for purified water has to be installed which can be the standard equipment or the special three way faucet head model with a more elegant design.

Immersion Pumps Models TS12 to TS24 are suitable for CNC machine tools featuring coolant supply through the tool holder or driving spindle or equipped with internally cooled tool. These pumps are equipped with a peripheral impeller to achieve a compact high pressure unit. Series TS are suitable for filtered coolant only. To reduce pump pressure, models TS22 to TS24 are also available with an optional Y/YY (Dahlander) motor configuration for 4 pole operation at half speed. Volumetric delivery: up to 70 l/min Delivery head: up to 95 m Please contact us for delivery quantity

Horizontal End-Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are not self-priming and must be gravity fed. All pumps are equipped with double mechanical seal. This pump series is designed for horizontal installations next to a tank and are capable of cutting aluminium chips and similar materials and pumping of these materials along with the coolant fluid. An agitator located at the pump suction helps to break up and separate any large bundles of chips or birds nests which reach the pump suction. The specially made cutting unit (>60 HRC) is cuting chips and the above located semi-open impeller allows with its large clearances to pump the particles along with the coolant fluid from the machine back to the filter. The SBC pumps are capable of handling chip to coolant ratios of up to 1.5% by weight. Volumetric delivery: up to 1400 l/min Delivery head: up to 34 m

Cutter Pumps The cutter pumps of the series SFC are capable of cutting aluminium chips and similar materials and pumping of these materials along with the coolant fluid. An agitator located at the pump suction helps to break up and separate any large bundles of chips or birds nests which reach the pump suction. The specially made cutting unit (>60HRC) is cuting chips and the above located semi-open impeller allows with its large clearances to pump the particles along with the coolant fluid from the machine back to the filter. The SFC pumps are capable of handling chip to coolant ratios of up to 1.5% by weight. The SFC pumps are equipped with the user-friendly 45 degree flange connection which allows for either vertical or horizontal pipe connection and the connection of a pressure gauge with G 1/4. Volumetric delivery: up to 1700 l/min Delivery head: up to 45 m Please contact us for delivery quantity.

Screw spindle pumps with their silicon carbide spindle housing and highly wear resistant spindles are capable of achieving extremely high pressures. Brinkmann high pressure screw pumps are designed for pumping filtered and lubricating fluids such as coolant oils andwatersoluble coolants. High pressure screw pumps are NOT designed for dry-running. Screw spindle pumps are positive displacement pumps which always require the installation of a pressure relief valve in order to prevent bursting. Volumetric delivery: up to 878 l/min Delivery pressure: up to 200 bar Please contact us for delivery quantity

Screw spindle pumps with their silicon carbide spindle housing and highly wear resistant spindles are capable of achieving extremely high pressures.Brinkmann high pressure screw pumps are designed for pumping filtered and lubricating fluids such as coolant oils andwatersoluble coolants. High pressure screw pumps are NOT designed for dry-running. Screw spindle pumps are positive displacement pumps which always require the installation of a pressure relief valve in order to prevent bursting. Volumetric delivery: up to 878 l/min Delivery pressure: up to 200 bar Please contact us for delivery quantity