Nuts and bolts - Import export

stainless steel*internal thread M 10*Ø 12 mm

As a specialist for special parts, we are your competent partner for high-quality fasteners: made of any special materials according to drawing to specification / factory standard according to special standard (for example DIN 2510) according to technical regulations (eg AD-W2, AD-W7, AD-W10, TRD 106, etc.) with all acceptances and double approvals (for example, works certificate 2.1, works certificate 2.2, acceptance test certificate, 3.1, acceptance test certificate 3.2, TÜV, Germanischer Lloyd, etc.)

The compression-type fittings are the link between the thermocouple and the test area and facilitate precise adaptation. After installing the compression-type fitting, the thermocouple can be inserted and clamped in with the desired installation length. That makes it possible to perform individual measurements with self-defined installation lengths directly onsite.

The compression-type fittings are the link between the thermocouple and the test area and facilitate precise adaptation. After installing the compression-type fitting, the thermocouple can be inserted and clamped in with the desired installation length. That makes it possible to perform individual measurements with self-defined installation lengths directly onsite.

The compression-type fittings are the link between the thermocouple and the test area and facilitate precise adaptation. After installing the compression-type fitting, the thermocouple can be inserted and clamped in with the desired installation length. That makes it possible to perform individual measurements with self-defined installation lengths directly onsite.

The compression-type fittings are the link between the thermocouple and the test area and facilitate precise adaptation. After installing the compression-type fitting, the thermocouple can be inserted and clamped in with the desired installation length. That makes it possible to perform individual measurements with self-defined installation lengths directly onsite.

The PLUS SYSTEM series of linear actuators consists of highly protected linear units featuring a self-sustaining anodized aluminum structure and a steel re-enforced driving belt. This is a line of exceptionally sturdy and high performance actuators in terms of load, moment control, speed and acceleration. High load capacity,High speed,Low wear and tear,Low friction,Low maintenance.Corrosion resistant version All Plus System series of linear actuators are available with stainless steel elements, for applications in harsh environments and/or subject to frequent washes. The Plus System linear units are made by using extruded anodized Anricorodal 6060 and 6082 aluminum, which houses bearings, linear rails, nuts and bolts and components made of low carbon SS AISI 303 and 404C steel, preventing or delaying corrosion caused by humidity experienced in the environments where the linear units are used.The PLUS SYSTEM series consists of 3 distinct products with different features: ELM,Robot,SC.

Bolt with head (according to EN 22340) Bolt without head (according to EN 22341) Stud bolts (stress bolts) (according to DIN 2510) Blocking pins Fox bolts (according to DIN 1434 etc.) Spacer bolts Threaded bolts, threaded pins, stud bolts, threaded rods (according to DIN 913-916, 939, 976, 2510) Double-threaded bolts with rolled-on thread on one or both sides

PLACOGRIP® High quality index bolts for the most exacting demands INDEXING BOLT Stainless steel nickel plated SLEEVE Stainless steel KNOB Polyamide black Further RAL – or special colors upon request Also available with lock nuts DIN 439 for index bolts

PLACOGRIP® High quality index bolts compact, with stop, proper to small construction dimensions and thin walls INDEXING BOLT Stainless steel 1.4305 SLEEVE Steel gunmetal finish KNOB Polyamide black Further RAL – or special colors upon request PLEASE NOTE Particularly suited for screwing in thin-walled items In this version with stop the button is pulled out, rotated by 90° and secured by the notch Also available with lock nuts DIN 439 for index bolts

secutex Impact Protection for screwing This is our top seller – secutex buffer pad with a perforated plate. Easy and flexible to use and can be fixed reliably with the perforated plate as reinforcement. In this way, you will have a universal impact protection in a short time. Size and quantity of the drill holes depend on the substructure and must be specified on site. Selection of the screws We recommend screw sizes up to a maximum of 6mm, any larger dimension does not provide additional strength in combination with the castin perforated plate. As screws we recommend hexagon socket screws with low head according to DIN 7984 or DIN 6912. Not recommended Countersunk screws; inefficient transfer of the force into the impact protection, Bolts with hexagon head; the nut grips the bolt on the outside, the borehole must be much larger for this. Normal screws with hexagon socket; the screw head is significantly higher, the impact protection must be thicker

This stainless steel, type B roof safety hook for metal seam roofs is suitable for all directions of load (apart from axial loads). It is simply clamped onto a seam without needing to penetrate the roof surface. Our roof hook is installed quickly and easily using the 4 nuts and bolts supplied. Roof safety hook in accordance with EN 517:2006, type B Anchorage point for PPE + ladder hooks For stainless steel ≥ 0.5mm; copper and titanium zinc ≥ 0.6mm; aluminium ≥ 0.7mm Simple, penetration-free installation using just 4 bolts Designed for rounded-edge and standing edge roofs Incl. stainless steel installation set

This reinforced, stainless steel anchorage point (Ø 16 mm) comes with a special supporting tube (Ø 42 mm) and includes an angular plate for lateral installation. Simply drill 2 holes through a load-bearing beam to install it. Our standard package includes threaded bolts and nuts for countering. EN 795:2012, A + CEN/TS 16415:2013 Angular plate for lateral installation Designed for load-bearing wooden structures Minimum beam dimensions: 100 mm x 200 mm Incl. stainless steel installation set

Inductive proximity switches are contact-free sensors. They detect all conductive metals, regardless of whether they move or not. The achievable sensing range of the devices depends on the object material and its dimensions. The vibration-resistant sensors can be approached laterally or frontally. Inductive proximity switches are used for presence detection (e.g. goods carriers), positioning (e.g. dampers), counting (e.g. nuts /bolts), speed detection (e.g. for cog wheels), on conveyor systems (e.g. hose feedings) or distance measurements (e.g. press-in checking) of metallic objects.

Inductive proximity switches are contact-free sensors. They detect all conductive metals, regardless of whether they move or not. The achievable sensing range of the devices depends on the object material and its dimensions. The vibration-resistant sensors can be approached laterally or frontally. Inductive proximity switches are used for presence detection (e.g. goods carriers), positioning (e.g. dampers), counting (e.g. nuts /bolts), speed detection (e.g. for cog wheels), on conveyor systems (e.g. hose feedings) or distance measurements (e.g. press-in checking) of metallic objects.

Inductive proximity switches are contact-free sensors. They detect all conductive metals, regardless of whether they move or not. The achievable sensing range of the devices depends on the object material and its dimensions. The vibration-resistant sensors can be approached laterally or frontally. Inductive proximity switches are used for presence detection (e.g. goods carriers), positioning (e.g. dampers), counting (e.g. nuts /bolts), speed detection (e.g. for cog wheels), on conveyor systems (e.g. hose feedings) or distance measurements (e.g. press-in checking) of metallic objects.

Inductive proximity switches are contact-free sensors. They detect all conductive metals, regardless of whether they move or not. The achievable sensing range of the devices depends on the object material and its dimensions. The vibration-resistant sensors can be approached laterally or frontally. Inductive proximity switches are used for presence detection (e.g. goods carriers), positioning (e.g. dampers), counting (e.g. nuts /bolts), speed detection (e.g. for cog wheels), on conveyor systems (e.g. hose feedings) or distance measurements (e.g. press-in checking) of metallic objects.