Industrial vehicles - Import export

Vacuum lifting devices for curved panes, concave and convex, inner and outer radius from 450 mm of up to 6000 kg for sale or hire. Also for wavy panes available.

Our mini cranes MRK can be used on any surface, fit into any van when folded and can be easily loaded and unloaded. Thanks to the crawler chassis, the assembly cranes can easily travel over uneven surfaces and even master extreme inclines. Thanks to the emission-free electric drive and the non-staining chains, they are also suitable for indoor use. They are operated directly or by radio remote control. Heavydrive offers you a wide range of these flexible all-rounders up to a maximum load of 10,000 kg for rent or purchase.

Due to its construction and suction plate form this panel suction system can be employed for both wall and roof panels It can be adjusted to fit the individual panel forms and profiles. By the deployment of extension arms even very long panels can also be safely and stabily transported.

Our glass assembly equipment lifts and fits windows and panes of up to 1300 kg to the millimetre, even overhead, and are built narrowly so that they can fit through doors and move down corridors. Using the battery-operated pane setter is a foolproof way to avoid awkward and heavy manual lifting. Remote control allows you to ensure the self-driver is always under control.

Heavydrive®'s special rubber compound keeps the suction pads soft and flexible at temperatures below zero, just like snow tyres. This way, they can be used at temperatures as low as -20°C.

These extremely long and thin panes require special suction systems. Heavydrive® offers these suction systems in a wide range of sizes and loading capacities.

You are planning a facade assembly with our overhead rail transport system and you would like guidance or you have any questions?

Our assembly lifts are ingenious - with a max. lift height of 7.9 m, it helps to safely manoeuvre loads of up to 500 kg. One of the decisive advantages of this assembly lift is that, during glass pane assembly, the vacuum suction cups can be driven to the facade without problems, as Heavydrive uses counter weights. With conventional lifts, for exhibition stand construction or sound engineering, the lifting carriage is underneath the lifted object. With our models, this would be disruptive. Last but not least, this practical all-rounder is folded by hand and, if needed, even fits into a car. It is hand driven and therefore requires hardly any servicing. Movable under a load of 500 kg.

Suction systems for flat glass with up to 14000 kg capacity. For the most part variable to fit pane size.

Vacuum suction systems with special plates for rough surfaces such as stone slabs, plastic panels, wooden panels, wood based boards and much more up to 6000 kg.

Our original Heavydrive glass transport wagons are easily collapsible and can be assembled again using only a few grips. Our special heavy load models with a lifting capacity of up to 1,000kg are secure due to a low centre of gravity, they guarantee optimal anti-slip security and can be adapted to different pane sizes. The new “AIR” product line uses pneumatic tyres for highly shock-absorbing transportation and is suitable for all terrain, including moving over paved surfaces. We have developed and manufactured these wagons and can manufacture custom requests to meet your demands!

Under remote control panes can be manoeuvred in up to 4 axes and set safely and easily in any height and position, even with an up to 300 kg load. Fitted with cable remote control.

The glass lifting device is an innovative solution for unloading, loading, transport, and fitting glass. One person can transport a glass panel weighing 80 kg. The device can be easily assembled and disassembled – it only weighs 35 kg. It has large 13 inch wheels which allow it to move on uneven surfaces. The wheelbase can be adjusted, which enables it to pass through doors and move on narrow pavements.

How do we improve the durability and performance of products? Through our production of heating mats for lithium-ion batteries and other batteries, we also indirectly contribute to the conservation of resources. In this way, the batteries are better protected against strong or fluctuating temperature influences. This means that they are less prone to failure and have a significantly longer service life and performance. Preheating, warm up or heating in continuous operation The heating mats are equipped with a performance tailored to the customer and regulate the temperature of the batteries and rechargeable batteries according to the necessary conditions. With optional equipment such as self-adhesive foil (one-sided or double-sided foil lamination), these can be attached to the battery or the block super easily. Application ✔️ in electric cars & hybrid vehicles ✔️ for electric commercial vehicles ✔️ for electric industrial trucks ✔️ other battery-powered industrial applications

Counterweight system for suction units with a bearing load of over 1000 kg. Secure mounting under protrusions of up to 1.5 m. Can be hitched onto any construction tower or truck crane.

These devices are suitabele for transportigng heavy loads of up to 1300 kg, overcoming obstacles such stairs, ramps and tailboards. Also for loads containing liquids such as fridges & co. Heavy loads (such as switch an server abinets, safes, boilers, parts of mchinery and systems, etc.) can therefore be delivered down or up stairs, even by a single person.

Other information IF -Design Award for Triflex®-Design Torsional movements possible Other information Installation instructions Joining, separating and filling of the Triflex®. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. Triflex® 332.16 Inner height hi: 16 mm Inner width Bi: 16 mm Bending radii R: 38 - 100 mm Pitch: 13.3 mm E-Chain®. 332.32 Inner height hi: 32 mm Inner width Bi: 32 mm Bending radii R: 75 - 250 mm Pitch: 25 mm E-Chain®. 332.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 100 - 250 mm Pitch: 30 mm E-Chain®. 332.75 Inner height hi: 75 mm Inner width Bi: 75 mm Bending radii R: 140 - 300 mm Pitch: 36 mm E-Chain®. 352.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 10 - 250 mm Pitch: 30 mm E-Chain®, snap-open 333.16 Inner height hi: 16 mm Inner width Bi: 16 mm Bending radii R: 38 - 100 mm Pitch: 13.3 mm E-Chain®. 333.32 Inner height hi: 32 mm Inner width Bi: 32 mm Bending radii R: 75 - 250 mm Pitch: 25 mm E-Chain®. 333.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 100 - 250 mm Pitch: 30 mm E-Chain®. 333.75 Inner height hi: 75 mm Inner width Bi: 75 mm Bending radii R: 140 - 300 mm Pitch: 36 mm E-Chain®. 353.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 10 - 250 mm Pitch: 30 mm E-Chain®, snap-open This modular, rugged joint system is suitable for: Three-axis movements for machines of any type For dirt-filled environments High tensile strength Where rectangular shapes are requested Completely closed - reliable protection against dirt and chips Combination of different bending radii and axes Connection and separation possible at any chain Flanged mounting brackets or brackets, galvanized steel Snap-open Series 352 and 353 Combination of Series 353/333 possible Typical industrial sectors and applications Machine tools Robotics Material handling system Plastics industry Construction machinery Vehicle manufacturing Medical equipment IF -Design Award for Triflex®-Design Torsional movements possible

Other information Series R48 Inner height hi: 25 mm Inner widths Bi: 25 - 130 mm bending radii R: 60 - 250 mm Pitch: 30,3 mm E-Tube, snap-open along the outer radius Series R58 Inner height hi: 35 mm Inner widths Bi: 50 - 200 mm bending radii R: 75 - 250 mm Pitch: 33,3 mm E-Tube, snap-open along the outer radius Series R68 Inner height hi: 45 mm Inner widths Bi: 50 - 250 mm bending radii R: 100 - 300 mm Pitch: 36 mm E-Tube, snap-open along the outer radius iF-Design-Award for Series R117/R118 and Series R68 ESD classification: Electrically conductive ESD/Atex versions on request UL94-V0 Classifications on request E-Tube made of igumid HT: Hot chips (to 850°C) cannot burn into it. Supplied as a special design on request Other information Series R48 Inner height hi: 25 mm Inner widths Bi: 25 - 130 mm bending radii R: 60 - 250 mm Pitch: 30,3 mm E-Tube, snap-open along the outer radius Series R58 Inner height hi: 35 mm Inner widths Bi: 50 - 200 mm bending radii R: 75 - 250 mm Pitch: 33,3 mm E-Tube, snap-open along the outer radius Series R68 Inner height hi: 45 mm Inner widths Bi: 50 - 250 mm bending radii R: 100 - 300 mm Pitch: 36 mm E-Tube, snap-open along the outer radius E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining and separating of the E-Tubes. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. E2 R100 and E2 R Small pitch for silent operation Protection for cables and tubes against chips (even hot chips) Rugged and tight Space-saving with good ratio of inner to outer dimensions Modular interior separation options Small pitch for low-noise, silent operation Very small radii possible through small pitch Smooth, chip-repellant exterior contour Removable lid for shortening the installation time Double stop dog system for longer unsupported lengths KMA mounting brackets with potential for "all-round" fastening Typical industrial sectors and applications Materials handling Construction machinery Machine tools Timber Processing Machines Long travels in many industrial sectors Semiconductor ESD versions Theater and entertaining industry Vehicles General mechanical engineering etc. In all areas exposed to dirt and chips iF-Design-Award for Series R117/R118 and Series R68 ESD classification: Electrically conductive ESD/Atex versions on request UL94-V0 Classifications on request E-Tube made of igumid HT: Hot chips (to 850°C) cannot burn into it. Supplied as a special design on request

Overview for E2/000 advantages Other information Series EF2.21 Inner height hi: 21 mm Inner widths Bi: 25 - 50 mm bending radii R: 35 - 180 mm Pitch: 33.3 mm E-Chain®, snap-open along the outer radius Series 1500 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm E-Chain®, snap-open along the outer radius Series 1400 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm E-Chain®, snap-open along the inner radius Series 1450 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm Half energy tube, snap-open along the inner radius Series 1480 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm Full energy tube, snap-open along the inner radius Series 2500 Inner height hi: 25 mm Inner widths Bi: 25 - 125 mm bending radii R: 55 - 250 mm Pitch: 46 mm E-Chain®, snap-open along the outer radius Series 2400 Inner height hi: 25 mm Inner widths Bi: 25 - 125 mm bending radii R: 55 - 250 mm Pitch: 46 mm E-Chain®, snap-open along the inner radius Series 2450 Inner height hi: 25 mm Inner widths Bi: 25 - 125 mm bending radii R: 100 - 250 mm Pitch: 46 mm Half energy tube, snap-open along the inner radius Series 2480 Inner height hi: 25 mm Inner widths Bi: 38 - 103 mm bending radii R: 100 - 250 mm Pitch: 46 mm Full energy tube, snap-open along the inner radius Series 2700 Inner height hi: 35 mm Inner widths Bi: 50 - 175 mm bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, snap-open along the outer radius Series 2600 Inner height hi: 35 mm Inner widths Bi: 50 - 175 mm bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, snap-open along the inner radius Series 2650 Inner height hi: 35 mm Inner widths Bi: 50 - 175 mm bending radii R: 100 - 250 mm Pitch: 56 mm Half energy tube, snap-open along the inner radius Series 2680 Inner height hi: 35 mm Inner widths Bi: 50 - 100 mm bending radii R: 100 - 250 mm Pitch: 56 mm Full energy tube, snap-open along the inner radius Series 3500 Inner height hi: 45 mm Inner widths Bi: 50 - 255 mm bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, snap-open along the outer radius Series 3400 Inner height hi: 45 mm Inner widths Bi: 50 - 255 mm bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, snap-open along the inner radius Series 3450 Inner height hi: 45 mm Inner widths Bi: 50 - 255 mm bending radii R: 150 - 300 mm Pitch: 67 mm Half energy tube, snap-open along the inner radius Series 3480 Inner height hi: 45 mm Inner widths Bi: 75 - 115 mm bending radii R: 150 - 300 mm Pitch: 67 mm Full energy tube, snap-open along the inner radius Series 255 Inner height hi: 24 mm Inner width Bi: 25 mm Bending radii R: 55 - 250 mm Pitch: 27.8 mm E-Chain®, snap-open along the outer radius CRC series. 255 Inner height hi: 24 mm Inner width Bi: 38-103 mm Bending radii R: 150 - 250 mm Pitch: 27.8 mm e-chain® Series CRC. 255 Assembly tool E"2/000 e-chains® - quick opening with assembly tools. Assembly tool Overview E2/000 bow chains Two-part - the E2 standard as clamp chain version Overview E2/000 bow chains ESD classification: Electrically conductive ESD/Atex versions on request IPA classification: ISO cleanroom class 3 (DIN 14644-1), at v=2 m/s, with standard material igumid G Series 2500.05.055.0 UL94 V0 classifications on request 46 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, e. g. Series 2600.05.075.0 iF Design Award for the E2/000 series EF2.21 Overview for E2/000 advantages Other information Series EF2.21 Inner height hi: 21 mm Inner widths Bi: 25 - 50 mm bending radii R: 35 - 180 mm Pitch: 33.3 mm E-Chain®, snap-open along the outer radius Series 1500 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm E-Chain®, snap-open along the outer radius Series 1400 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm E-Chain®, snap-open along the inner radius Series 1450 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm Half energy tube, snap-open along the inner radius Series 1480 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm Full energy tube, snap-open along the inner radius Series 2500 Inner height hi: 25 mm Inner widths Bi: 25 - 125 mm bending radii R: 55 - 250 mm Pitch: 46 mm E-Chain®, snap-open along the outer radius Series 2400 Inner height hi: 25 mm Inner widths Bi: 25 - 125 mm bending radii R: 55 - 250 mm Pitch: 46 mm E-Chain®, snap-open along the inner radius Series 2450 Inner height hi: 25 mm Inner widths Bi: 25 - 125 mm bending radii R: 100 - 250 mm Pitch: 46 mm Half energy tube, snap-open along the inner radius Series 2480 Inner height hi: 25 mm Inner widths Bi: 38 - 103 mm bending radii R: 100 - 250 mm Pitch: 46 mm Full energy tube, snap-open along the inner radius Series 2700 Inner height hi: 35 mm Inner widths Bi: 50 - 175 mm bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, snap-open along the outer radius Series 2600 Inner height hi: 35 mm Inner widths Bi: 50 - 175 mm bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, snap-open along the inner radius Series 2650 Inner height hi: 35 mm Inner widths Bi: 50 - 175 mm bending radii R: 100 - 250 mm Pitch: 56 mm Half energy tube, snap-open along the inner radius Series 2680 Inner height hi: 35 mm Inner widths Bi: 50 - 100 mm bending radii R: 100 - 250 mm Pitch: 56 mm Full energy tube, snap-open along the inner radius Series 3500 Inner height hi: 45 mm Inner widths Bi: 50 - 255 mm bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, snap-open along the outer radius Series 3400 Inner height hi: 45 mm Inner widths Bi: 50 - 255 mm bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, snap-open along the inner radius Series 3450 Inner height hi: 45 mm Inner widths Bi: 50 - 255 mm bending radii R: 150 - 300 mm Pitch: 67 mm Half energy tube, snap-open along the inner radius Series 3480 Inner height hi: 45 mm Inner widths Bi: 75 - 115 mm bending radii R: 150 - 300 mm Pitch: 67 mm Full energy tube, snap-open along the inner radius Series 255 Inner height hi: 24 mm Inner width Bi: 25 mm Bending radii R: 55 - 250 mm Pitch: 27.8 mm E-Chain®, snap-open along the outer radius CRC series. 255 Inner height hi: 24 mm Inner width Bi: 38-103 mm Bending radii R: 150 - 250 mm Pitch: 27.8 mm e-chain® Series CRC. 255 Assembly tool E"2/000 e-chains® - quick opening with assembly tools. Assembly tool Overview E2/000 bow chains Two-part - the E2 standard as clamp chain version Overview E2/000 bow chains IPA Classification Report IG 1303-640-1, tested 1500.050.038.0 at v = 0,5 / 1,0 / 2,0 ISO Class 2, according to DIN EN ISO 14644-1 E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining and separating of chain links, filling of the E-Tubes. Assembly Instructions System E2/000 Recommended installation accessories Application examples Applications in various industrial sectors and in the igus® test laboratory. System E2/000 The E2 standard Quickly opened from the right or left with a screwdriver or by hand - opening mechanism accessible from above Lightning fast installation using thumb - safe seat without additional closing mechanism The separators and interior separation sit safely, even when the E-Chain® is open Excellent mechanical stability; design and material provide long service life Typical industrial sectors and applications General construction machinery Materials handling technology Construction machinery Wood machines Machine tools Glass machines Plastic machines Long travels Semiconductor Theater and entertaining industry Vehicles And much more ESD classification: Electrically conductive ESD/Atex versions on request IPA classification: ISO cleanroom class 3 (DIN 14644-1), at v=2 m/s, with standard material igumid G Series 2500.05.055.0 UL94 V0 classifications on request 46 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, e. g. Series 2600.05.075.0 iF Design Award for the E2/000 series EF2.21

strong and tightened fastening solution for pipes.

ideal cable clip for easy application and assembly without drilled hole

Various product ranges to assemble and fasten easily panels

ideal to release unpredected loads on cable wires.

Ideal for fastening cables on metal sheets. Various designs and sizes.

ideal fastener to assemble permanently two panels.

ideal tight and strong fastening solution

IDeal to assemble panels with metal screw

Push rivets ideal for panel fastening

Screw Rivet ideal for panel fastening. Possibility to disassemble