Industrial vehicles - Import export

These extremely long and thin panes require special suction systems. Heavydrive® offers these suction systems in a wide range of sizes and loading capacities.

These devices are suitabele for transportigng heavy loads of up to 1300 kg, overcoming obstacles such stairs, ramps and tailboards. Also for loads containing liquids such as fridges & co. Heavy loads (such as switch an server abinets, safes, boilers, parts of mchinery and systems, etc.) can therefore be delivered down or up stairs, even by a single person.

Counterweight system for suction units with a bearing load of over 1000 kg. Secure mounting under protrusions of up to 1.5 m. Can be hitched onto any construction tower or truck crane.

You are planning a facade assembly with our overhead rail transport system and you would like guidance or you have any questions?

Our assembly lifts are ingenious - with a max. lift height of 7.9 m, it helps to safely manoeuvre loads of up to 500 kg. One of the decisive advantages of this assembly lift is that, during glass pane assembly, the vacuum suction cups can be driven to the facade without problems, as Heavydrive uses counter weights. With conventional lifts, for exhibition stand construction or sound engineering, the lifting carriage is underneath the lifted object. With our models, this would be disruptive. Last but not least, this practical all-rounder is folded by hand and, if needed, even fits into a car. It is hand driven and therefore requires hardly any servicing. Movable under a load of 500 kg.

Suction systems for flat glass with up to 14000 kg capacity. For the most part variable to fit pane size.

Vacuum suction systems with special plates for rough surfaces such as stone slabs, plastic panels, wooden panels, wood based boards and much more up to 6000 kg.

The glass lifting device is an innovative solution for unloading, loading, transport, and fitting glass. One person can transport a glass panel weighing 80 kg. The device can be easily assembled and disassembled – it only weighs 35 kg. It has large 13 inch wheels which allow it to move on uneven surfaces. The wheelbase can be adjusted, which enables it to pass through doors and move on narrow pavements.

Under remote control panes can be manoeuvred in up to 4 axes and set safely and easily in any height and position, even with an up to 300 kg load. Fitted with cable remote control.

Our original Heavydrive glass transport wagons are easily collapsible and can be assembled again using only a few grips. Our special heavy load models with a lifting capacity of up to 1,000kg are secure due to a low centre of gravity, they guarantee optimal anti-slip security and can be adapted to different pane sizes. The new “AIR” product line uses pneumatic tyres for highly shock-absorbing transportation and is suitable for all terrain, including moving over paved surfaces. We have developed and manufactured these wagons and can manufacture custom requests to meet your demands!

Heavydrive®'s special rubber compound keeps the suction pads soft and flexible at temperatures below zero, just like snow tyres. This way, they can be used at temperatures as low as -20°C.

Our mini cranes MRK can be used on any surface, fit into any van when folded and can be easily loaded and unloaded. Thanks to the crawler chassis, the assembly cranes can easily travel over uneven surfaces and even master extreme inclines. Thanks to the emission-free electric drive and the non-staining chains, they are also suitable for indoor use. They are operated directly or by radio remote control. Heavydrive offers you a wide range of these flexible all-rounders up to a maximum load of 10,000 kg for rent or purchase.

Due to its construction and suction plate form this panel suction system can be employed for both wall and roof panels It can be adjusted to fit the individual panel forms and profiles. By the deployment of extension arms even very long panels can also be safely and stabily transported.

Vacuum lifting devices for curved panes, concave and convex, inner and outer radius from 450 mm of up to 6000 kg for sale or hire. Also for wavy panes available.

Our glass assembly equipment lifts and fits windows and panes of up to 1300 kg to the millimetre, even overhead, and are built narrowly so that they can fit through doors and move down corridors. Using the battery-operated pane setter is a foolproof way to avoid awkward and heavy manual lifting. Remote control allows you to ensure the self-driver is always under control.

In 2015 the product range name was changed. The old product range name was Castrol Optimol Paste MP range. White and anthracite-colored assembly pastes, resistant to water and aggressive media Description Castrol Molub-Alloy Paste MP (previous product name Castrol Optimol Paste MP series) are assembly pastes with solid lubricants. They are particularly suitable for long-term and lifetime lubrication, even under extreme mechanical and chemical stress. Application Castrol Molub-Alloy Paste MP is suitable for lubrication points that are exposed to aggressive environmental influences. It is used in systems and machines in the chemical and automotive industries. It comes from vehicle parts such as: B. door stops, which are exposed to extreme influences during production.

In 2015 the product range name was changed. The old product range name was Castrol Optimol Paste MP range. White and anthracite-colored assembly pastes, resistant to water and aggressive media Description Castrol Molub-Alloy Paste MP (previous product name Castrol Optimol Paste MP series) are assembly pastes with solid lubricants. They are particularly suitable for long-term and lifetime lubrication, even under extreme mechanical and chemical loads. Application Castrol Molub-Alloy Paste MP is suitable for lubrication points that are exposed to aggressive environmental influences. It is used in systems and machines in the chemical and automotive industries. It comes from vehicle parts such as: B. door stops, which are exposed to extreme influences during production.