Components- electronic - Import export

The UTC OPA2336 is a CMOS operational amplifier. It is operated on a 2.1V (Min.) single supply. A100kΩ load is driven by the rail-to-rail output and the accuracy of the output voltage is ensured at ± 3mV. The UTC OPA2336 is characterized by its low quiescent current (20μA/amplifier), low offset voltage (125μV max), low input bias current (1pA), and high open-loop gain (115dB).

The LTC6090CS8E#TRPBF is a general purpose instrumentation amplifier from Linear Technology. It is a single-channel, rail-to-rail amplifier with a wide common-mode input voltage range. It features low offset voltage, low noise, and high common-mode rejection ratio (CMRR). The amplifier is housed in an 8-pin SOIC-EP package and is ideal for applications such as signal conditioning, data acquisition, and medical instrumentation

Linear Voltage Regulator IC Positive Fixed 1 Output 3.3V 150mA 6-SON (2x2) Digi-Key LDO Regulator Pos 3.3V 0.15A 6-Pin WSON EP T/R Arrow LDO Voltage Regulators 150mA 30V Ultra-Low IQ Wide Inpt LDO Reg

The VNQ5050KTR-E is a high side power distribution switch and load driver integrated circuit (IC) from STMicroelectronics. It has an operating temperature range of -40°C to 150°C (TJ) and is packaged in a 24-SOP (0.295", 7.50mm Width) Exposed Pad SMD/SMT package. It has a minimum supply voltage of 4.5V and a non-inverting configuration. The turn-on delay time is 15000 ns and the ratio of output to input is 1:1. It is available in Digi-ReelR Alternate Packaging.

The ALTERA EP3C10E144I7N FPGA is a powerful and reliable Field Programmable Gate Array (FPGA) designed for a wide range of applications. This FPGA features 94 I/O pins, a 144-LQFP Exposed Pad, and a Cyclone® III 423936 Bits. It is designed to operate in temperatures ranging from -40°C to 100°C (TJ). The EP3C10E144I7N is powered by a voltage range of 1.15 V to 1.25 V. The EP3C10E144I7N is a surface mount FPGA that is ideal for applications that require high performance and reliability. It is designed to provide a low-cost solution for applications that require a high level of integration and flexibility. The EP3C10E144I7N is also designed to be easy to use and configure, making it an ideal choice for a wide range of applications.

The IR2181(4)(S) are high voltage, high speed power MOSFET and IGBT drivers with independent high and low side referenced output channels. Proprietary HVIC and latch immune CMOS technologies enable ruggedized monolithic construction. The logic input is compatible with standard CMOS or LSTTL output, down to 3.3V logic. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high side configuration which operates up to 600 volts.

The LM5017SD/NOPB is a synchronous buck regulator from Texas Instruments. It is a high-efficiency, low-noise, adjustable switching regulator that can deliver up to 0.6A of output current. It is designed to operate from a wide input voltage range of 4.5V to 36V and can be used to generate output voltages as low as 0.8V. The LM5017SD/NOPB is housed in an 8-pin WSON package and is ideal for applications such as point-of-load regulation, battery charging, and LED lighting.

The Atmel® AT25DF641 is a serial interface Flash memory device designed for use in a wide variety of high-volume consumer based applications in which program code is shadowed from Flash memory into embedded or external RAM for execution. The flexible erase architecture of the AT25DF641A, with its erase granularity as small as 4-Kbytes, makes it ideal for data storage as well, eliminating the need for additional data storage EEPROM devices. Features • Single 2.7V - 3.6V Supply • Serial Peripheral Interface (SPI) Compatible – Supports SPI Modes 0 and 3 – Supports Atmel RapidS Operation – Supports Dual-Input Program and Dual-Output Read • Very High Operating Frequencies – 100MHz for RapidS – 85MHz for SPI – Clock-to-Output (tV) of 5ns Maximum • Flexible, Optimized Erase Architecture for Code + Data Storage Applications – Uniform 4-Kbyte Block Erase – Uniform 32-Kbyte Block Erase – Uniform 64-Kbyte Block Erase – Full Chip Erase • Individual Sector Protection with Global Protect

The Allegro A2982SLWTR-T is a power distribution switch and load driver designed to provide a high-current, low-voltage, low-side switch for a wide range of applications. It is a bipolar 20-SOIC W package with a 500mA current rating and a temperature range of -20°C to 85°C (TA)

Maxim Integrated Real Time Clocks DS1248Y-70+ is a 32-DIP module with a through-hole mounting style. Its key features include an operating temperature range of 0°C to 70°C, a parallel interface, and time/date formats like YY-MM-DD-dd and HH:MM:SS:hh (12/24 hr). This RTC is part of Maxim Integrated's DS1248 family of low-power real-time clocks that provide reliable and highly accurate time-keeping for improved data integrity and system reliability. It can be used in applications such as general and industrial measurements, RF communications, automotive, medical monitoring, and other embedded system time synchronization applications. Its compact form factor and low power consumption make it a great choice for your timekeeping needs. The DS1248Y-70+ is packaged in tubes for convenient handling and storage.

The AP2139AK-3.3TRG1 is a positive fixed linear voltage regulator with a single regulator and a voltage output of 3.3V. It has a maximum input voltage of 6.6V and a typical voltage dropout of 0.4V at 250mA. It is packaged in a SC-74A, SOT-753 and has an operating temperature range of -40°C to 85°C. Features: • Positive fixed linear voltage regulator • Single regulator • Voltage output of 3.3V • Maximum input voltage of 6.6V • Typical voltage dropout of 0.4V at 250mA • Packaged in a SC-74A, SOT-753 • Operating temperature range of -40°C to 85°C Applications: • Power supplies • Battery-powered devices • Automotive electronics • Industrial electronics • Telecommunications equipment

The Qualcomm Interface AR8031-AL1B is a surface mount Ethernet transceiver designed for use in a wide range of applications. It is capable of operating over a temperature range of -40°C to 85°C and is powered by a 3.3V supply. The AR8031-AL1B is compliant with the IEEE 802.3 standard and supports 10/100/1000 Mbps data rates. Features: • Compliant with IEEE 802.3 standard • Supports 10/100/1000 Mbps data rates • Low power consumption • Surface mount design • Operating temperature range of -40°C to 85°C • Powered by a 3.3V supply Applications: The Qualcomm Interface AR8031-AL1B is suitable for a wide range of applications, including: • Industrial automation • Automotive • Networking • Telecommunications • Medical • Consumer electronics

The AD813ARZ-14 is a high-speed, low-power video amplifier module from Analog Devices Inc. It is designed for use in video applications such as video switching, video distribution, video signal processing, and video signal conditioning. It features a wide bandwidth of 100 MHz, a low current supply of 4.5 mA, and a slew rate of 250V/µs. It is available in a 14-SOIC package and operates over a temperature range of -40°C to 85°C.

The LTC2440CGN#PBF is a high-performance, low-power, 16-bit, sigma-delta analog-to-digital converter (ADC) with an SPI interface. It is designed to provide accurate, low-noise conversion of differential analog signals in a wide range of applications. The LTC2440CGN#PBF features a wide input range of 0°C to 70°C, a low power consumption of only 1.2 mW, and a fast conversion rate of up to 1.5 MSPS. It also offers a wide range of features, including a programmable gain amplifier, a programmable digital filter, and a programmable reference voltage. The LTC2440CGN#PBF is ideal for applications such as medical imaging, industrial process control, and automotive systems. It is available in a 16-SSOP package and is RoHS compliant.

The Microchip Linear Voltage Regulators MCP1812AT-033/OT are designed to provide a reliable and efficient power supply solution for a variety of applications. This device is a 0.6V @ 300mA over current positive SC-74A SOT-753 voltage regulator. It features a low dropout voltage, low quiescent current, and high power supply rejection ratio. The device also has a wide input voltage range of 2.7V to 6.5V and a wide output voltage range of 0.6V to 5.5V. It is also capable of providing up to 300mA of output current. The device is also designed to be highly efficient, with a typical efficiency of up to 95%. The device is also designed to be highly reliable, with a maximum junction temperature of 150°C. The device is also RoHS compliant and is available in a variety of packages. The Microchip Linear Voltage Regulators MCP1812AT-033/OT are an ideal solution for providing a reliable and efficient power supply solution for a variety of applications.

The Lattice LCMXO3LF-6900C-6BG256C is a low-cost, low-power, high-performance Field Programmable Gate Array (FPGA) device. It is a member of the Lattice MachXO3LF family of FPGAs and is designed to provide a cost-effective solution for a wide range of applications

The XCR3128XL-10VQ100C is a Complex Programmable Logic Device (CPLD) from Xilinx. It is a 9.1ns surface mount device with a temperature range of 0°C to 70°C (TA). It is in-system programmable with a minimum of 1K program/erase cycles. It is packaged in a 100-VQFP (14x14) CoolRunner XPLA3 tray.Features: • 9.1ns access time • 0°C to 70°C (TA) temperature range • In-system programmable with a minimum of 1K program/erase cycles • 100-VQFP (14x14) CoolRunner XPLA3 tray Applications: The XCR3128XL-10VQ100C CPLD is suitable for a wide range of applications, including: • Automotive • Industrial• Medical • Networking • Telecommunications • Consumer electronics • Aerospace and defense

Atmel ATXMEGA128A4U-MHR is an 8-bit microcontroller with 128KB of Flash memory and 44-pin QFN package. It is based on the AVR XMEGA architecture and is designed for applications requiring high performance, low power consumption, and advanced peripherals. Features: • 128KB of Flash memory • 44-pin QFN package • Up to 32MHz clock frequency • Up to 32-bit wide data bus • Up to 16-bit wide instruction bus • Up to 8-channel DMA controller • Up to 8-channel Event System • Up to 8-channel Analog Comparator • Up to 8-channel 10-bit ADC • Up to 4-channel 10-bit DAC • Up to 4-channel USART • Up to 4-channel SPI • Up to 4-channel I2C • Up to 4-channel Timer/Counter • Up to 4-channel PWM • Up to 4-channel RTC • Up to 4-channel Watchdog Timer • Up to 4-channel Event System • Up to 4-channel Real-Time Clock • Up to 4-channel Programmable Logic Unit • Up to 4-channel Programmable Gain Amplifier • Up to 4-channel Programmable Voltage Reference

AT27LV256A-90JU-T from Microchip Technology / Atmel is a 256Kb (32K x 8) EPROM technology based memory IC with Parallel interface. Power supply voltage range is 3V ~ 3.6V and 4.5V ~ 5.5V and the access time is 90ns. The device is available in Cut Tape (CT) packaging and is specified for operating temperature from -40°C ~ 85°C (TC). Features: • Memory Capacity: 256Kb (32K x 8) • Memory Format: EPROM • Memory Interface: Parallel • Access Time: 90ns • Power Supply Voltage: 3V ~ 3.6V, 4.5V ~ 5.5V • Operating Temperature: -40°C ~ 85°C (TC) • Series: AT27LV256A • Technology: EPROM - OTP • Factory Pack Quantity: 750 • Packaging: Cut Tape (CT) Applications: AT27LV256A-90JU-T from Microchip Technology / Atmel is suitable to be used in embedded systems, consumer electronics, automotive, mission-critical sensors, IoT, and industrial equipment.

The Cirrus Logic CS5361-KZZR is a 24-bit, 192 kHz stereo audio analog-to-digital converter (ADC) and digital-to-analog converter (DAC) with two inputs and two outputs. It is designed for use in professional audio applications such as digital mixing consoles, digital audio workstations, and digital audio effects processors. The CS5361-KZZR features a low-noise, low-distortion design with a wide dynamic range and low power consumption. It is housed in a 24-TSSOP package and operates over a temperature range of -40°C to 85°C.

The MAX526DCWG is a digital-to-analog converter (DAC) from Maxim Integrated. This device is designed to provide high-precision, low-noise performance in a wide range of applications. It features a R-2R parallel architecture, a temperature range of 0°C to 70°C, and a fast settling time of 3μs (typical). The MAX526DCWG is available in a 24-pin SOIC W package, making it suitable for a variety of applications. The MAX526DCWG offers a wide range of features, including a low-noise, low-distortion output, a wide input voltage range, and a fast settling time. It also features a low-power shutdown mode, allowing it to be used in battery-powered applications. Additionally, the device is designed to be immune to clock jitter, making it suitable for use in high-speed systems. Overall, the MAX526DCWG is an ideal choice for applications requiring high-precision, low-noise performance.

MM74HC132MX_NL is a Schmitt trigger inverter and a single-function gate-IC that is manufactured with maximum propagation delay of 21ns @6V, 50pF and logic level low of 0.3V to 1.2V. It is housed in a 14-SOIC 0.154" package with a narrow width of 3.90mm that is well suited for surface mount technology (SMT) applications. Features: • Schmitt Trigger • Maximum Propagation delay of 21ns @6V, 50pF • Logic level low of 0.3V to 1.2V • 14-SOIC (0.154", 3.90mm Width) Package-Case • Series: 74HC • 2 Inputs • SMD/SMT Mounting-Style Applications: MM74HC132MX_NL functionality is ideal for high-speed logic systems in various applications such as Clocks/Timers, Pulse Generators, Flip-Flops, Encoders/Decoders, Interface Circuits and Bus Drivers. It is also suitable for interface and logic control circuits in communication systems, computing systems, automotive, industrial control and robotics.

The ADI Digital Potentiometer AD5254BRUZ10 is a 10k ohm, 20-pin TSSOP device that provides a digitally controlled variable resistor. It is designed to operate over a temperature range of -40°C to 105°C and has a tolerance of ±30%. It is an I2C device and can be used to adjust the resistance of a circuit in a wide range of applications. Features: • 10k ohm resistance • 20-pin TSSOP package • Operating temperature range of -40°C to 105°C • ±30% tolerance • I2C interface Applications: The ADI Digital Potentiometer AD5254BRUZ10 can be used in a wide range of applications, including: • Adjusting the gain of amplifiers • Adjusting the brightness of LED displays • Adjusting the speed of motors • Adjusting the frequency of oscillators • Adjusting the sensitivity of sensors

ATMEL Microcontrollers ATSAMD21G18A-AU is a low-power MCU based on the ARM Cortex M0+ Core. This MCU has 38 I/O pins and is housed inside a 48-TQFP package. It also has an internal oscillator and a 48 MHz speed processor. The microcontroller has Connectivity features such as I2C, LIN, SPI, and UART/USART. Furthermore, it has 14x12b A/D Data Converters and 1x10b D/A Data Converters. The Brown-out Detect/Reset, DMA, I2S, POR, PWM and WDT are the peripherals included in this microcontroller. Features: • Low-power MCU based on the ARM Cortex M0+ Core • 38 I/O pins and 48-TQFP package • Internal oscillator and 48 MHz speed processor • Connectivity features such as I2C, LIN, SPI, and UART/USART • 14x12b A/D Data Converters & 1x10b D/A Data Converters • Brown-out Detect/Reset, DMA, I2S, POR, PWM and WDT peripherals Applications: • Automotive control systems • Industrial control systems • Robotics • Home Automation Systems • Data Acquisition and Signal Processing • Medical Devices

The ON Semiconductor MC74VHC1G08DFT2G is a single 2-input AND gate in a SC-70 package. It is a high-speed CMOS logic device that operates from a single 5.5 V supply. The device features low power consumption and high noise immunity. Features: • Low power consumption • High noise immunity • Single 5.5 V supply • High-speed CMOS logic • Surface mount • Operating temperature range: -55°C to 125°C • Package: SC-70 • Alternate Packaging: Digi-ReelR • Input leakage current: 1μA Applications: The MC74VHC1G08DFT2G is suitable for a wide range of applications, including logic gates, logic buffers, and logic inverters. It is also suitable for use in automotive, industrial, and consumer applications.

The MCP1702T-3302E/CB is a low quiescent current low dropout (LDO) voltage regulator in 3 pin SOT-23A package. This regulator is an ideal choice for two to six primary cell battery powered applications, 9V alkaline and one or two cell Li-Ion powered applications. Output voltage tolerance of MCP1702 is typically ±0.4% at +25°C and ±3% maximum over operating junction temperature range of -40°C to +125°C. Line regulation is ±0.1% typical at 25°C. When only 1F of output capacitance is used, the LDO output is steady. Electrolytic capacitors made of ceramic, tantalum, or aluminum can be utilized for input and output. Overcurrent and overtemperature protection provides a reliable solution for every application. Short circuit protection. Fixed output voltage is 3.3V

The 74HC175PW,118 NXP Semiconductors Integrated Circuits (ICs) Flip-Flop is a D-Type flip-flop with a voltage-supply of 2 V ~ 6 V and an operating-temperature of -40°C ~ 125°C (TA). It has a single element and a current-output-high-low of 5.2mA, 5.2mA. It is packaged in a Tape & Reel (TR) Alternate Packaging and has a frequency-clock of 89MHz. It has a surface mount mounting-type and a max-propagation-delay-v-max-cl of 30ns @ 6V, 50pFFeatures: • Voltage-supply of 2 V ~ 6 V • Operating-temperature of -40°C ~ 125°C (TA) • Single element • Current-output-high-low of 5.2mA, 5.2mA • Packaged in a Tape & Reel (TR) Alternate Packaging • Frequency-clock of 89MHz • Surface mount mounting-type • Max-propagation-delay-v-max-cl of 30ns @ 6V, 50pF Applications: • Automotive • Industrial • Consumer • Medical • Telecommunications

The Freescale / NXP MC9S08SH8CSC is an 8-bit microcontroller with 8KB of Flash memory. It is designed for use in a wide range of applications, from automotive to consumer electronics. The MCU is capable of operating at speeds up to 40MHz and is housed in an 8-SOIC package. It is also rated for operation over a temperature range of -40°C to 85°C (TA). The MC9S08SH8CSC features a wide range of peripherals, including a 10-bit ADC, SPI, I2C, UART, and a variety of timers. It also has a low-power sleep mode, allowing it to conserve power when not in use. The MCU is also compatible with a variety of development tools, including CodeWarrior and IAR Embedded Workbench. The Freescale / NXP MC9S08SH8CSC is an ideal choice for applications requiring a low-power, high-performance 8-bit microcontroller. It is well-suited for a variety of applications