Industrial drum washing machines for metals - Import export

DOLFİN- VDL series Drum (Spiral) parts washing machines are used especially for cleaning small parts with high production quantities and produced in bulk. The materials poured from the inlet part of the spiralised drum in the device are directed towards the outlet part of the drum by the spirals inside the drum. While the drum moves on its own axis according to the set rotation speed, the parts are subjected to washing (degreasing), rinsing, passivation and drying processes respectively (depending on the model). Since these processes are sequential and continuous, all processes are completed quickly and effectively in a single device. Full penetration is achieved by pressurised spraying and immersion effects in each section. It is a very functional model used especially for washing bolts, nuts, washers, or small parts of this type, and fittings, nipples, couplings and fittings processed in high quantities on cnc and automat machines.

Dolfin KNV series conveyor belt washing machines are parts washing machines used for washing parts produced in series in large quantities. The parts placed at the entry point are moved towards the exit point of the device by means of the conveyor. The parts guided on the conveyor line are washed with high pressure, pre-washing, washing, rinsing, spraying with passivation liquids. At the end of the cleaning process, these parts are dried with pressurised hot air and discharged at the exit point. If desired, it can be integrated into production processes and robotic loading and unloading options are also available. While the entire device is fully automatic, all washing details are parametric. Cleaning is provided at any desired level by means of spray nozzles specially designed according to the part geometry.

Fully automated spray jet cleaning system with rotating ramps, upward-opening curtain and roll-out worktable. It may include several stages of cleaning: washing, rinsing, drying. All stages are performed in one chamber. The washer is designed for cleaning large parts weighing up to 1,5 ton starting from cooling mixtures, dust, shavings, composites, oil after stamping, conservation lubricants, polishing pastes, emulsions, oil products. The efficient cleaning of surfaces that helps to remove a wide variety of contaminants is carried out with an alkaline cleaning solution heated to a predetermined temperature.

Fully automated spray cleaning system equipped with upward-opening passage curtain. The unit is designed for cleaning large and heavy parts and assemblies. Parts are put on a movable bottom (trolley) and move inside the washing chamber. The part is processed by means of a gantry U-shaped ramp with multidirectional nozzles on all sides. The efficient cleaning of surfaces that helps to remove a wide variety of contaminants is carried out with an alkaline cleaning solution heated to a predetermined temperature.

The Smart Clean Advanced Model is designed for fully automatic robot manufacturing lines with an End of Line automated CMM measuring station. Parts to be cleaned from oil, coolant, chips, and other residues are placed in the cleaning process chamber by a robot. Unlike the Smart Clean Standard Model, the Smart Clean Advanced Model does not use chemical cleaning fluid that needs to be replaced when the washing function declines. The Smart Clean Advanced Model uses only water and evaporation technology to clean workpieces. A built-in recovery unit purifies the water and separates the oil or coolant so that the water can be reused in the process. Select from a range of 16 different programs to provide the best cleaning results.