Coupling - Import export

Dynamic components for the construction of screw feeders suitable for conveying powder, grain and fibre products

MECHANICAL/HYDRAULIC FM LIFTERS FOR FURNITURE Ideal for transporting furniture, safes, containers and machine tools. The FM series mechanical/hydraulic lifter kit for furniture is suitable for moving furniture components in furniture stores, during removals or simply when you need to move furniture safely and without any effort. The maximum load capacity of the pair is 600kg (FM60 mechanical model) and 1800kg (FM180/A - FM 180/B hydraulic models). The kit consists of 2 lifts with lifting plates with non-slip coating and a strap for fixing. Lifting is by means of a screw with crank for the FM 60 model and a practical lever with a hydraulic pump for FM 180. The lifts are equipped with non-marking pivoting rubber wheels with steering lever. RAL 1028 yellow paint for the FM 180 models and blue for the FM 60 model Operation: Position the lifting plates below the part to be lifted, adjust the upper support and tension the safety belt.

Sealing Pliers designed for welding packaging of all sizes in the barrier material (polypropylene laminated paper and aluminum). Thanks to its small size and limited weight can be used anywhere. The pliers dual hot bar solder is available with a width mm. 300 and mm. 400 , furthermore the welds are repeatable side by side at any length. The temperature of the sealing bars is adjustable from 0 °C to 200 °C using a temperature controller positioned on the plier. Thanks to the coated bars with antiadhesive teflon, it is also possible to weld polyethylene bags of high thickness. (Min 100 my each side - my 250 max each side)

Drum clamp to be installed on the forks of the forklift. The clamp is made of a sturdy steel frame and fork mounted with a forklift, the locking is ensured by two screws and a chain with safety catch that prevents the clamp from sliding off the forks. The coupling and release system of the drum is automatic and the operator must not get off the forklift. It is sufficient to bring the clamp close to the drum and lift. Closing of the clamp is favored by the weight of the drum; to unhook it, simply place the drum on the floor. The clamp cannot be used to handle empty drums. The clamp is suitable for 210 lt metal drums with a diameter of about mm. 580. The pliers can also lift plastic drums with edges but only of the type that can be seen in the picture.

PORTABLE CONSTANT HEAT SEALER – SUPER CELLO ( for multi-layer bags) T Clamp sealers suitable for the sealing of large packaging in barrier material (polypropylene, laminated paper and aluminum) and polyethylene. Thanks to the power cable of 4.5 meters you can move easily around the product to be packaged. The clamp sealer performs a dual hot jaws over a length of 42 cm. The sealers are repeatable, one beside the other, without length limits. The temperature of the sealing bars is adjustable from 60 ° C to 250 ° C by a thermoregulator positioned on the caliper. The longitudinally knurled bars and coated with an anti-adhesive treatment are also suitable for welding polypropylene.

double heating system with pre-heating that concurs to fuse with very low temperature respect to the standard temperature pressure system with “OUT” function for very delicate woven inside and outside belts cleaning devices carbon/graphite lower belt separation blade automatic turn ON and turn OFF by digital timer COUPLING, LAMINATION, TRANSFER, APPLICATIONS - COMPLETE LAMINATION LINE THAT CONCURS THE COUPLING OF 2 OR MORE LAYERS OF WOVEN WITH INTERLININGS, WEB GLUE OR FILM GLUE DIAGNOSTIC ON THE CONTROL PANEL introducion of the several rolls of wovens, interlinings, web glue or film glue by engine rolls perfect syncrony between fusing machine winding module and rewinding unit by inverter automatic cut machine availabilty for worked parts winding unit with vertical and horizontal control for a perfect alignment of the woven rolls during the winding fusing machine connected to the winding and rewinding module by inverter exit zone with rewinding unit equipped

The flexible joint mounted on the encoder shaft grants a very good coupling, without parallel and angular mis-alignment, and avoids overloads, which can damage the bushings life. Elap measuring wheels are fit for the use in touch with metal, steel profiles, varnished surfaces, plastic materials, paper, cardboard, wood, fabrics and leather; they offer an excellent resistance to oil, fuels, ozone and environmental agents.

MIB Marine Breakaway Coupling provides automatic protection of floating and submerged hoses when subject to excess axial (tensional) loads on MBM, SPM, FSO & FPSO installations. With built-in valving that provides 100% leak-tight sealing when closed under all design conditions, this MIB product is the only one of its type to offer operating companies the highest level of protection of their installation, investment and the environment.

A standardised design of hydraulic QCDC offering speed and ease of mating and separating a rigid marine arm or flexible hose to a vessel. Suitable for ambient and low temperature service. Adaptable to connect to its nominal diameter plus up to two diameters smaller. Temperatures: Low, Ambient Dimensions: from 6'' to 16'' Pressure Rating: ASME B16.5 Class 150, 300

MIB QCDC is the quick and easy method to connect and disconnect a rigid marine arm or jetty hose to and from the vessel manifold. Available for ambient, low temperature, cryogenic and CNG service conditions. QCDC coupling is hydraulically operated and can be adaptable to various sizes of manifold flange. Customised designs available on request from 2” to 24” diameter. Temperatures: Cryogenic, Low, Ambient, High Dimensions: from 2'' to 24'' Pressure Rating: ASME B16.5 Class 150, 300, 900

A new generation of Marine Breakaway Coupling has been launched by MIB ITALIANA in response to the industry demands for maximised environmental protection of our oceans. Key features of the “MIBreak” MBC - Petal Valve Hose Marine Breakaway Coupling include: -Enhanced reliability and increased break bolt reliability for prolonged service in a seawater or salt laden environment. -Unique on site reassembling ease and speed of reassembly. -By rapid closure of the larger segments, a large section of the full bore is shut off first, followed by controlled closure of the smaller segments. This avoids excess surge effects and reduces spillage to a minimum. -Full Bore, no interruptions in the flow path, with zero pressure loss. -The “MIBreak” solution includes a revolutionary damping arrangement which not only controls the closure rate but is specifically designed to combat problems of debris/solids ingress that could be experienced within the mechanism. -Protects hose-strings against excessi

A simple but effective method of achieving quick connection and disconnection to and from flanges, albeit a tanker manifold, hose installation, SPM, or other ambient or low temperature service requirement. A series of cam locking units on the periphery of the coupler flange are clamped or unclamped by a hand held wrench. Suitable for all ambient petrochemicals, low temperature and cryogenic liquefied gases. Temperatures: Cryogenic, Low, Ambient, High Dimensions: from 3'' to 20'' Pressure Rating: ASME B16.5 Class 150, 300

A unique MIB product offering all of the operational advantages of a hydraulic QCDC but with the added safety feature of an integrated ball valve. The valve is interlocked with the QCDC to ensure full isolation of the marine arm or flexible hose prior to release of the QCDC mechanism. Suitable for ambient, low and cryogenic temperatures. Temperatures: Cryogenic, Low, Ambient, High Dimensions: from 2'' to 24'' Pressure Rating: ASME B16.5 Class 150, 300

Realized in zinc-coated steel sheet with length of 100 mm. Thickness of sheet steel from 8/10 to 10/10 with Ø from 80 mm to 1000 mm. Available in plain, flanged and borded version. Product category DUCTWORK