Metal tanks - Import export

METALLIC CONTAINMENT TANKS FOR 1000 LITERS IBCS Containment tanks, specific for 1000 liter cisterns. They are available for the storage of 1 or 2 cisterns. The containers of polluting liquids must be stored in a safe manner, in order to prevent contamination of the aquifers in particular. The collection tanks are watertight, painted with epoxy powders and the support surface is in hot galvanized grating and can be removed. Blue RAL 5010 color. The tanks are equipped with special seats for forklifting. Available models: FPB826S: tank for the storage of 1 1000 liter cistern FPB8070C: tank for the storage of 2 1000 liter cisterns It is the responsibility of the user to check that the products destined to be stored and handled are compatible with the construction material and any painting of the tanks.

CONTAINMENT TANKS WITH PERCH FOR 1000 LITERS IBCS Containment tanks with perch to facilitate emptying, specific for 1000 liter cisterns. They are available for the storage of 1 or 2 small tanks. The containers of polluting liquids must be stored in a safe manner, in order to prevent contamination of the aquifers in particular. The collection tanks are watertight, oven-painted with epoxy powders and equipped with a hot-galvanized, removable grid. Color RAL 5010 blue. They are also equipped with special seats for forklift loading. Available models: FPB826C: tank for the storage of 1 1000 liter cisterns FPB8070T: tank for the storage of 2 1000 liter cisterns It is the responsibility of the user to check that the products destined to be stored and handled are compatible with the construction material and the possible painting of the tanks.

The best solution for tertiary filtration: high solid removal yields, minimum water and energy consumption. In the TF – TV VM (VM = metal tank) series the cloth support is made of a perforated metal sheet drum. This model is used for wastewater treatment plants of small working capacity (up to 2.000 PE) or as a secondary treatment downstream from immobilized biomass systems. It is available for installation in concrete tanks or metal tanks versions. The equipment is supplied with an electrical switchboard. - Gravity filtration with limited head loss. - Continuous filtration without standby units for the backwash phases. - Cloth filter in polstoff free fibre provided with high mechanical strength. - High filtration rate (concentrations of TSS < 5 mg/l at discharge).

The best solution for tertiary filtration: high solid removal yields, minimum water and energy consumption. The PPC – PPC VM (VM = metal tank) series was developed for plants with medium-large potential. For filters in this range, cloth washing is done with two pumps only (of which one backup pump) which serveall the discs. The selection of discs on which to conduct the backwash (in sequence) is carried out by using double-acting valves with pneumatic control. The largest standard model in this series has a filtering surface of 160 m2 that can process a load equal to a community of approximately 50.000 PE. A singular feature of this series is the low energy consumption, even more noticeable with the increasing plant potential. - Gravity filtration with limited head loss. - Continuous filtration without standby units for the backwash phases. - Cloth filter in polstoff free fibre provided with high mechanical strength.

The best solution for tertiary filtration: high solid removal yields, minimum water and energy consumption. The tertiary filtration is strongly influenced by the hydraulic profile of the plant, which often cannot be changed. In the PECV VM (VM = metal tank) disc filters series the collection shaft is placed vertically. The goal is to feed equipment completely submerged even with very low hydraulic profiles. Even for this series, cloth washing is done with pumps, each of which is served by two or more discs. The pumps are actuated in sequence in order not to disrupt the functionality of the system. The PECV VM solution is ideal for small-medium unattended systems with heavy and extremely variable loads. The largest model of this series can process a load equal to a community of approximately 10.000 PE. The various models can be installed in parallel to obtain various working capacities. - Gravity filtration with limited head loss.

The best solution for tertiary filtration: high solid removal yields, minimum water and energy consumption. In the PEC – PEC VM (VM = metal tank) series, cloth washing is done with pumps, each of which is served by two or more discs. The pumps are actuated in sequence in order not to disrupt the functionality of the system. The PEC – PEC MT solution is ideal for small-medium unattended systems with heavy and extremely variable loads. The largest model of this series can process a load equal to a community of approximately 20.000 PE. The various models can be installed in parallel to obtain various working capacities. - Gravity filtration with limited head loss. - Continuous filtration without standby units for the backwash phases. - Cloth filter in polstoff free fibre provided with high mechanical strength. - High filtration rate (concentrations of TSS < 5 mg/l at discharge).